Search content
Sort by

Showing 8 of 8 results by crypt0velli
Post
Topic
Board Announcements (Altcoins)
Re: [ANN] [XSH] TOR/i2p, Quantum proof, MN, PoS/PoW, Fully ano, SHIELD
by
crypt0velli
on 14/02/2018, 16:40:14 UTC
What is the next function to be implemented? Is not there anything until summer?
Whales are incoming, once that happens it will moon again. I've been in their forums, they are privately discussing buying up XSH

I think traders and investors are waiting for a favorable market condition before plunging into crypto again. Let's just wait, Bitcoin is starting to recover.

Yeah the market is so unstable right now, it's so unpredictable, even with technical analysis it's hard to predict where the market is going right now that's why traders are waiting for the right timing to get in and resume trading. Also in a newcomer's point of view the market looks very scary right now so that's another reason why recently most of the coins' that have a really high potential like shield isn't really going up that much. But as what you said, patience is really the key here, let's just wait for a couple of weeks I'm sure shield will bounce back and hopefully reach another all time high.

markets the same place where it was when i first started

ripple $1 ish
trx 3 to 4 cents
xvg 5 cents...

ect ect

the whales pumped bitcoin from nov to jan and caused a bubble. BTC will need to go to AT LEAST 17,000 a coin to indicate a bullmarket

bitcoin is such a slow shit coin but every other shitcoin is tied to it

just means more chance for us smaller buyers to accumulate ! I just stumbled on this project and am now mining, I believe strongly that overhyped coins tend to drag along and go through long depression phases following the big pumps (cough cough XVG) so the smaller community and active discord/devs on this project is very appealing. Looking forward to whats in store q1-q2 and beyond
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 11/02/2018, 16:20:37 UTC
Quote
Both Uni and Ant seem to be having issues, understandable considering they have had thousands more miners connecting over the past couple of days.
With Uni I get rejected shares and with Ant I cannot currently connect.

Same here, guess they are overloaded. I took the liberty to create a pool myself today. The fee is 0,5% ( same as Ant ) and the pool is located in Amsterdam. No conversion or other hidden fees.

The address is: stratum+tcp://xvg-blake2s.nlpool.nl:5766
As username put in your Verge wallet address and use password "c=XVG"


thanks pointing some hash your way
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 11/02/2018, 01:07:55 UTC
Hello when trying to join the group Antminepool does not make me connection

B2S: Authorization failed: (NULL)
Socket was closed remotely (by pool)
B2S: Job timeout, disconnect, retry in 20 sec...

This only happens if in wallet I put a XVG address that I have of Bittrex but if I take an address XVG of other users who have published here works perfect.

Is there a problem with that address of Bittrex?

Another problem I have is in zpool since yesterday I am extracting XVG with the same wallet of Bittrex D6mz8XLApBjeHEdrNXoFh8vZ5bjbxrbBmM and I have a pending payment that has not been reflected in Bittrex what I call the attention is that in Zpool shows me the Mon Eda Unobtanium and the wallet you have assigned is from XVG and the payment I have pending sample Total Paid * * * 0.02558559 UNO Will it be that the payment does not come because it is in a different currency?

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -eworker ortadan.ASRock -ewal 0x3ecd934271818d98b95f9591fd7ea1d8163c2fa7 -epsw x -estale 0 -di 0 -tstop 80 -tt -55 -cclock 1100 -mclock 1950 -powlim 50 -cvddc 850 -mvddc 850 -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal D6mz8XLApBjeHEdrNXoFh8vZ5bjbxrbBmM -dpsw c=XVG -dcoin blake2s -dcri 50 -allpools 1         

i think antminepool is having issues right now in general w all the new hash coming online
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 09/02/2018, 19:48:27 UTC
For XVG I was on zpool for 12 hours with zero rejected shares, but they take too much and my wallet for whatever reason is set to mine all blake2s instead of just verge then autoexchange.  Unimining = 10%+ rejected shares.  Antminepool I've only had one rejected share so far, but hasn't been running long.  Going to run for 12 hours and see the difference in currency between the two.

I have observed the same.  I am more 15+ hrs with 18.5 GH/s on zpool and only got 40% of what whattomine is reporting for the hashrate.  I am not sure about accuracy of whattomine on xvg-blake2s either but judging by other coins they have listed with reasonable estimate accuracy I would be suspicious on zpool.

Looking at other's response it seems,
zpool - less connectivity issues but lower payout.  
Unimining - connectivity issues mainly cause of surge in mining.
Antminepool - less connectivity issue.  payout is slow because it's much smaller mining pool.



Here is my report after mining XVG for over 25 hours straight on zpool with no more than 5 Rejected shares.

I have got roughly 2/3 of what whattomine says I should be getting.  That's quite the cut zpool is taking!


There was one point yesterday on Zpool I noticed the "total earned" report a number, but about one hour or so later, that number was reporting about 2 or 3 XVG less than the hour earlier.   That was a red flag WTF moment for me.

... Also I seem to be mining Ninja and Verge for some reason and can't figure out why.     Between that and the payout fishyness, I'm going to try another pool when I have the energy to make the changes to my .bat files.


I sincerely hope that a fair and properly functioning pool for XVG comes about for us, sooner than later.



Dependin how much hash you have 25 hours might not be a big enough sample to gauge accurately but seems to line up with the zpool narrative regardless..
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 09/02/2018, 17:03:45 UTC
Seem to be having much better luck with antminepool as well I was definitely having latency issues with unimining

Same here switched to http://antminepool.com

Uniming gave me a lot of stale shares, disconnections and high ping

just put

-dpool stratum+tcp://s.antminepool.com:9008 -dwal walletadressXVG.nameofyourpool -dcoin blake2s -dpsw c=XVG

u see your worker name on the pool ?

Can't find anything about  -dwal walletadressXVG.nameofyourpool in the description of the pool.
I used this .bat for ETC + Verge (blake2s):

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0x83428c64cF11af81d8a1e70c48bb375172062F69.RX480 -epsw x -dpool stratum+tcp://s.antminepool.com:9008 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw c=XVG -dcri 44




Sorry, I have just corrected it just put the XVG wallet.

20min mining Total Earned      0.00000000 XVGB  15.7 Gh/s

antminepool is a smaller pool. From their stats page looks like they find about 4 blocks per day
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 09/02/2018, 15:59:03 UTC
Seem to be having much better luck with antminepool as well I was definitely having latency issues with unimining
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 09/02/2018, 13:42:48 UTC
I'm getting like 10% rejected shares for XVG while dual mining. All shares for ETH are okay.
what could be the cause? any1 experienced this?

I'm having similar issues as well what are you cards/clocks?

RX 580 8gb Sapphire Nitro+ Hynix memory
Core 1200/900
Mem 2250/950

I've got 580 8GB Sapphire Pulses with Samsung running core 1130/mem 2150/voltage 860 and getting about 3-4% rejected (0 for eth) @ 49 dcri. Based on our numbers seems like core clocks arent the issue so might be either too high memory clock or dcri? Going to tweak later today and see what I get
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
by
crypt0velli
on 09/02/2018, 13:13:35 UTC
I'm getting like 10% rejected shares for XVG while dual mining. All shares for ETH are okay.
what could be the cause? any1 experienced this?

I'm having similar issues as well what are you cards/clocks?