Search content
Sort by
Showing 4 of 4 results by fall0ut
Ive got another (maybe outlandish) question.
Can you run (is it efficient enough) your L3+ with a 220PSU, then use a transformer to convert to 110 for the wall hookup. I ask this because it might not be possible to add 220 where I'm at.
Can you run (is it efficient enough) your L3+ with a 220PSU, then use a transformer to convert to 110 for the wall hookup. I ask this because it might not be possible to add 220 where I'm at.
That depends on the PSU. it should say on the label if it can do both 110-120/220-240.
If its 220-240 only it will only run on 220. If it's 110-120 only and you connect it to 220 it can blow the PSU.
When I run one of my L3's it shows a pretty steady hashrate of ~520 which is pretty close to the stats page on the miner. However, if I add another one of my L3's, both rates drop and fluctuate from ~450 to ~480 each.
Unit 1 shows ~520
Unit 2 shows ~510
Unit 1 plus unit 2 shows ~950
I'm getting ready to add a third into the mix to see what happens. But, is there something I should be doing differently?
Unit 1 shows ~520
Unit 2 shows ~510
Unit 1 plus unit 2 shows ~950
I'm getting ready to add a third into the mix to see what happens. But, is there something I should be doing differently?
It's not that straight forward.. The firmware gives you a rough estimate of the hash rate the miner is doing. The Pool shows the hash rate that its registering from the miner over the network.
For example .. one of my miners registers 620 on the miner, but i have seen it spike up to 700+ on the pool. Then it might go as low as 580 according to the pool. the fluctuation is normal. It also can differ from pool to pool.
I came across an article a while ago that explained it better but i cant find it atm.
.. At this rate we might see it for a shot time lol.