Search content
Sort by
Showing 20 of 35 results by funtakus
Re: GMiner v1.22 Equihash 96,5/144,5/150,5(BEAM)/192,7/210,9/CuckooCycle(GRIN)
reduce virtual memory
Just wanted to share. I have a broken S5. One of the two boards overheated and stopped mining. I contacted Bitmain and they asked me to sent it to them. I asked if I could run the unit with only one board and was told that I could. They have had the board since August but I have not heard from them. The other board stopped working after a couple of weeks too. I reported this but still no reply. This is not good enough.
I sent them to the June 6 boards, and there is still no news, I was humbled. bitmain - bad company!
Re: [Review] Avalon 6 Miner - Winter Mining - Notlist3d - Also FAQ and Help
Re: [Review] Avalon 6 Miner - Winter Mining - Notlist3d - Also FAQ and Help
voltage is adjusted by rotating the resistor.
PSU is very quiet, you can connect 2 Avalon6
http://i.imgur.com/RSHEUD5.jpg
PSU is very quiet, you can connect 2 Avalon6
http://i.imgur.com/RSHEUD5.jpg
Re: [Review] Avalon 6 Miner - Winter Mining - Notlist3d - Also FAQ and Help
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
To Bitmain
Hello. I bought 11 pieces Antminer S5. One of the S5 did not work initially. Some time after the shutdown of the Internet has broken six boards. I sent them to you for the
repair / replacement. After 2 months I got them back. One refused to charge you to repair, because there were no elements (it did not work initially, so you sent) (picture
1). One broke a minute after switching on and then I saw visually that there is also suppressed from the destination elements (picture 2), another you're not repaired, it
does not work (picture 3). Of the 4 pieces you have repaired only one. 2 more pieces have to come from you in 2 weeks. Why you do not fulfill their warranty obligations?
Support Bitmain said that I should seek to directly to the factory, and they can not help me.
AntMiner S5 were purchased from wholesalers in Moscow, Igor Timofeev (id WeChat: IgorTimofeev).
He bought through 12.06.15 Yanhua and Janet (SF Express 590079852614)
http://i.imgur.com/L8OFE96.jpg
http://i.imgur.com/VJRXq16.jpg
http://i.imgur.com/apx12mD.jpg
http://i.imgur.com/InRtgs7.jpg
http://i.imgur.com/plQR3BO.png
Hello. I bought 11 pieces Antminer S5. One of the S5 did not work initially. Some time after the shutdown of the Internet has broken six boards. I sent them to you for the
repair / replacement. After 2 months I got them back. One refused to charge you to repair, because there were no elements (it did not work initially, so you sent) (picture
1). One broke a minute after switching on and then I saw visually that there is also suppressed from the destination elements (picture 2), another you're not repaired, it
does not work (picture 3). Of the 4 pieces you have repaired only one. 2 more pieces have to come from you in 2 weeks. Why you do not fulfill their warranty obligations?
Support Bitmain said that I should seek to directly to the factory, and they can not help me.
AntMiner S5 were purchased from wholesalers in Moscow, Igor Timofeev (id WeChat: IgorTimofeev).
He bought through 12.06.15 Yanhua and Janet (SF Express 590079852614)
http://i.imgur.com/L8OFE96.jpg
http://i.imgur.com/VJRXq16.jpg
http://i.imgur.com/apx12mD.jpg
http://i.imgur.com/InRtgs7.jpg
http://i.imgur.com/plQR3BO.png
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
After switching off the Internet broke 3 S5. Bitmayn I refused to guarantee for one blade due to mechanical action. When I sent the blade, then there was no mechanical damage. Please Bitmayn resolve the situation.
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
Hello! Recently I bought 17 pcs. of Antminer S5 from Russian reseller Igorgan1983 . A couple of days ago when the Internet access lost during the night, the temperature at hashing boards on 4 of miners was about 100-125 degrees, the fans was spinning at some minimum speed, so these 4 S5s has been burnt. After rebooting, the status of it's chips was -------. Now I sent all 4 units to reseller and he sent them to China. For shipping these miners back to China I will have to pay around 7000-8000 roubles.
Thereby, I have following questions:
1. Is it possible to compensate the shipping cost of transfer S5s to China?
2. Is it possible to accelerate the process of consideration of my case (there has been passed almost a week since the blades has arrived to China)?
3. Among the 17 S5s one has arrived to me in a used condition (blades version 1.7), I have already sent a pictures of it to you before - can it be replaced with completely new one?
4. When will be issued a firmware that fixes a bug with S5s overheating during the absence of the Internet access?
Thereby, I have following questions:
1. Is it possible to compensate the shipping cost of transfer S5s to China?
2. Is it possible to accelerate the process of consideration of my case (there has been passed almost a week since the blades has arrived to China)?
3. Among the 17 S5s one has arrived to me in a used condition (blades version 1.7), I have already sent a pictures of it to you before - can it be replaced with completely new one?
4. When will be issued a firmware that fixes a bug with S5s overheating during the absence of the Internet access?
Known bug first reported by me in March 2015. I almost burnt up all my miners twice because of this. Then put my fans on direct. Any miners burnt up because of this bug should be replaced for free. Yoshi has helped me in the past, is he still around?
https://bitcointalk.org/index.php?topic=902305.msg10833820#msg10833820
forward to solve the problem
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
Hello! Recently I bought 17 pcs. of Antminer S5 from Russian reseller Igorgan1983 . A couple of days ago when the Internet access lost during the night, the temperature at hashing boards on 4 of miners was about 100-125 degrees, the fans was spinning at some minimum speed, so these 4 S5s has been burnt. After rebooting, the status of it's chips was -------. Now I sent all 4 units to reseller and he sent them to China. For shipping these miners back to China I will have to pay around 7000-8000 roubles.
Thereby, I have following questions:
1. Is it possible to compensate the shipping cost of transfer S5s to China?
2. Is it possible to accelerate the process of consideration of my case (there has been passed almost a week since the blades has arrived to China)?
3. Among the 17 S5s one has arrived to me in a used condition (blades version 1.7), I have already sent a pictures of it to you before - can it be replaced with completely new one?
4. When will be issued a firmware that fixes a bug with S5s overheating during the absence of the Internet access?
Thereby, I have following questions:
1. Is it possible to compensate the shipping cost of transfer S5s to China?
2. Is it possible to accelerate the process of consideration of my case (there has been passed almost a week since the blades has arrived to China)?
3. Among the 17 S5s one has arrived to me in a used condition (blades version 1.7), I have already sent a pictures of it to you before - can it be replaced with completely new one?
4. When will be issued a firmware that fixes a bug with S5s overheating during the absence of the Internet access?
Re: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org
