Ninjastic
Search content
Sort by
Showing 7 of 7 results by invaer
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
invaer
on 23/03/2021, 12:02:24 UTC
Quote from: patrike on March 20, 2021, 09:48:05 AM
Quote from: invaer on March 17, 2021, 04:25:45 PM
Quote from: patrike on March 17, 2021, 08:30:59 AM
Quote from: invaer on March 15, 2021, 03:16:12 PM
But, if I copy the same launch parameters to the "Command line parameters to mining softwere" in Awesome Miner, then the miner crashes when launched in the same way.
So it's not about the launch parameters.
Please remove all command line parameters ("Parameters to mining software") you entered for the Managed Miner. Awesome Miner should automatically setup the command line. If you try to put in the same parameters manually as well, you may end up with some parameters being set twice.
I tested various launch options - nothing helped.
Usually I naturally launch without any parameters and miner crashes, as I described earlier.
What if you launch TeamRedMiner via Awesome Miner, then completely exit Awesome Miner right away. Is TeamRedMiner still crashing after a short while?
If I do this and close the agent immediately after launch, then everything works.
And if I then start the agent, then everything continues to work correctly.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
invaer
on 17/03/2021, 16:25:45 UTC
Quote from: patrike on Today at 08:30:59 AM
Quote from: invaer on March 15, 2021, 03:16:12 PM
But, if I copy the same launch parameters to the "Command line parameters to mining softwere" in Awesome Miner, then the miner crashes when launched in the same way.
So it's not about the launch parameters.
Please remove all command line parameters ("Parameters to mining software") you entered for the Managed Miner. Awesome Miner should automatically setup the command line. If you try to put in the same parameters manually as well, you may end up with some parameters being set twice.
I tested various launch options - nothing helped.
Usually I naturally launch without any parameters and miner crashes, as I described earlier.
Post
Topic
Board Идеи
Re: Маркетмейкер с плавающим спредом
by
invaer
on 15/03/2021, 16:39:15 UTC
Quote from: imhoneer on March 13, 2021, 03:04:01 PM
Основная наша цена которая подчиняется начальной формуле ценообразования к=ETH*USDC - это цена BID, а вот цена ASK - она двигается за этой ценой, как хвостик. В случает падения условно цены BID на 50% вниз, она падает только на 25%. Также в случае схлопывания спреда, по какой либо причине, она все равно привязывается к цене BID+0.1%. В случае, если цена BID в расчетах начинает превышать цену ASK, то происходит, то что цена BID становиться, как получилась в расчетах, а вот цена ASK привязывается к цене BID+0.1%.
Это работает только на словах.
Приведите формулу расчета спреда в зависимости от объема покупки/продажи, я надеюсь 25% были лишь примером.
Иначе, допустим, bid - 500, ask - 750, справделивая цена 625. Никому не интересно ни покупать ни продавать, пул умер. Какой алгоритм будет решать эту проблему?
Пока данный пул будет бездействовать поставщики ликвидности выведут оттуда все под 0, а стандартный амм пул будет зарабатывать постоянно на обмене - туда эти деньги и понесут.
Парам-парам-пам! Пиу!
Post
Topic
Board Идеи
Re: Маркетмейкер с плавающим спредом
by
invaer
on 15/03/2021, 16:22:36 UTC
Quote from: imhoneer on March 13, 2021, 03:04:01 PM
Основная наша цена которая подчиняется начальной формуле ценообразования к=ETH*USDC - это цена BID, а вот цена ASK - она двигается за этой ценой, как хвостик. В случает падения условно цены BID на 50% вниз, она падает только на 25%. Также в случае схлопывания спреда, по какой либо причине, она все равно привязывается к цене BID+0.1%. В случае, если цена BID в расчетах начинает превышать цену ASK, то происходит, то что цена BID становиться, как получилась в расчетах, а вот цена ASK привязывается к цене BID+0.1%.
Это работает только на словах.
Приведите формулу расчета спреда в зависимости от объема покупки/продажи.
Допустим, bid - 500, ask - 750, справделивая цена 625. Никому не интересно ни покупать ни продавать. Какой алгоритм будет решать эту проблему?
Пока данный пул будет бездействовать поставщики ликвидности выведут оттуда все под 0, а стандартный амм пул будет зарабатывать постоянно на обмене и будет прибыльне. Туда эти деньги и понесут - на юник.

Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
invaer
on 15/03/2021, 15:16:12 UTC
Quote from: patrike on Today at 02:41:14 PM
Quote from: invaer on March 14, 2021, 01:14:15 PM
Hi guys, there is a strange problem with TeamRedMiner 0.8.1 on the Kawpow algorithm.
TeamRedMiner has full support for Awesome Miner.
But when you start TeamRedMiner through the Awesome Miner interface, TeamRedMiner crashes at this point:
https://i.imgur.com/pIbjpVU.png
At the same time, if you start TeamRedMiner manually, then it works.
If you run diagnostics in Awesome Miner, then everything works in it.
Also Awesome Miner shows error accessing TeamRedMiner API:
https://i.imgur.com/rOMJ9Kg.png
This problem occurs on different rigs with different video cards.
All other Kawpow miners (Nanominer NBminer) work fine and have no API errors:
https://i.imgur.com/vLEGttU.png
I would be grateful if someone could help 
Is the Diagnostics running long enough for the problem to happen? You can configure this the diagnostics duration via the "Advanced" button in the Diagnostics window. Running the diagnostics and simply starting the mining software should be very similar.

If you copy all the command line parameters from the Diagnostics window to a command line window and run - is it a correct understanding that it all of a sudden works fine?

For the API message - this is expected and not a fault. In most cases Awesome Miner writes "Basic" API access. For mining software based on the Cgminer/Sgminer API, the term "Restricted" is being used instead, but it's the same thing and not an error.
Yes, the diagnostics take enough time and everything is fine during the diagnostics.
Yes, if I copy all the command line parameters from the Diagnostics window to a command line window and run - all is ok.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
invaer
on 14/03/2021, 13:14:15 UTC
Hi guys, there is a strange problem with TeamRedMiner 0.8.1 on the Kawpow algorithm.
TeamRedMiner has full support for Awesome Miner.
But when you start TeamRedMiner through the Awesome Miner interface, TeamRedMiner crashes at this point:
https://i.imgur.com/pIbjpVU.png
At the same time, if you start TeamRedMiner manually, then it works.
If you run diagnostics in Awesome Miner, then everything works in it.
Also Awesome Miner shows error accessing TeamRedMiner API:
https://i.imgur.com/rOMJ9Kg.png
This problem occurs on different rigs with different video cards.
All other Kawpow miners (Nanominer NBminer) work fine and have no API errors:
https://i.imgur.com/vLEGttU.png
I would be grateful if someone could help 
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
by
invaer
on 14/03/2021, 13:07:34 UTC
Hi guys, there is a strange problem with TeamRedMiner 0.8.1 on the Kawpow algorithm.
TeamRedMiner has full support for Awesome Miner.
But when you start TeamRedMiner through the Awesome Miner interface, TeamRedMiner crashes at this point:
https://i.imgur.com/pIbjpVU.png
At the same time, if you start TeamRedMiner manually, then it works.
If you run diagnostics in Awesome Miner, then everything works in it.
Also Awesome Miner shows error accessing TeamRedMiner API:
https://i.imgur.com/rOMJ9Kg.png
This problem occurs on different rigs with different video cards.
All other Kawpow miners (Nanominer NBminer) work fine and have no API errors:
https://i.imgur.com/vLEGttU.png
I would be grateful if someone could help  Huh