I had problems installing the WINUsb drivers using Zadig, but then I downloaded and used the XP Version of Zadig on a Windows 7 64 bit computer. It solved the problem.

XP drivers can be found here:  http://zadig.akeo.ie/downloads/

Unfortunately you'll need to provide more information for anyone to be able to help with your problem as the Blue Furies can display different errors and act differently on different operating systems.

I don't recall Windows recognising my Furies at first either, so I don't think that's a deal breaker. What you need to do is make sure that you're using the right driver for the correct miner. BFGMiner uses the BF1 drivers and each Fury needs to be seperately updated with the driver. CGMiner use the Zadig drivers and I think it automatically updates each Fury.

Initially I tried to use the Zadig driver incorrectly with my Furies running BFGMiner, but it just didn't happen. I can't advise on CGMiner and Zadig as I don't use CGMiner but for BFGMiner I found that I needed to remove the Zadig files completely from my system (then reboot, always reboot you know the drill) before I could get the BF1 drivers to update properly.

I'm using BFG 3.5.1 for my Furies and its still working well. I know you don't want to hear this but reading this long thread will help as there's loads of people who have commented on their particular OS and their particular problems so you will likely find someone who has experienced your frustration before and managed to overcome it.

I have no idea about firmware updates so perhaps someone else can comment on that but don't overlook seemingly inconsequential things like turning on and off hubs, pulling the Furies out and putting them back in again, rebooting Windows if you've been messing about with various usbs/hubs/ports for a while and if it's going no-where, don't be shy about completely uninstalling all usb root and hub instances using the Device Manager, then do a clean start by powering down then powering back up.

You could spin your wheels for ages waiting for people to provide the key to unlock your Fury mystery but if you're prepared to take the time, much of the gnashing of teeth and tricky solutions are documented on this thread, so dive in, dig deep and when you feel you're getting closer to identifying the problem, post again with specific OS details and other information about your set up.

Anyway, I feel your pain but don't give up, they hash well once you've got them going and then you can move onto the pencil mod

Good luck!

I've tried installing the driver software, and re-installing the firmware, no luck [ http://snag.gy/5aDXu.jpg ]
Anyone have a solution?
Thanks!

hey there!
i'm currently going threw a complete upgrade of my mining rig
i have the old 333mh/s USB asic miners and and currently getting ready to upgrade to the new 5+Gh/s USB units

they are all 9 months old and all in perfect working condition
i have 196 units available and 4x 49 port USB boards with power adapter available for sale

the miners all have there own boxes but i don't have the original boxes for the USB boards but they will
be well packaged for delivery!

sell prices below!

$10 / BTC 0.01395 per USB miner
5 units for $40 / BTC 0.05602
50 units for $450 / BTC 0.6302

49 port USB powered board $60 / 0.08403
4 available!


USPS delivery
miners = $3.70  / 5 units = $8 / 50 units = $16

The buttons are program and reset. They are only needed when flashing firmware to the device.

Try setting up everything again. Doing a gitpull for the latest code. But not letting the block erupters near mine peon they normally cause conflicting issues.

have a read on this site, he sells miners and has some setup information:-  www.cryptoware.co.uk

EDIT
Can you list your hardware and what you have done up to now?

Jacob who did you buy the device from?

Initially there was a clash between bluefury and erupter drivers, the fix at the time was to name the ports, com1    com2    etc.

you will have to do some reading on the BFGminer thread  as to how this works.  https://bitcointalk.org/index.php?topic=168174.msg4819869#msg4819869

also on the minepeon thread   https://bitcointalk.org/index.php?topic=251675.msg4806905#msg4806905

there is a lot of reading there,

unless someone else can jump in with more detail.

I would say try the newest minepeon 0.2.5. this way you get the new bfgminer whit it.

What version of minepeon?     the latest is 0.2.5 pr1

If you log into minepeon from your PC then all the pool and setup menus are there on screen.

1.  you need a powered USB2 hub  (your PC may have enough power but many do not) (the rPi will not drive a miner)
 
2. Have you installed the correct drivers? (Here:-  http://www.mediafire.com/download/819me4zvdju8lyg/bfgminerWin.zip)

3. what mining software are you using?