Ninjastic
Search content
Sort by
Showing 20 of 22 results by jakebot
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)
by
jakebot
on 23/12/2020, 14:13:43 UTC
I found Tytus's How to mine ETChash on Simple Mining.
https://medium.com/simplemining/how-to-mine-etcash-on-simplemining-11ceb9552901
Thanks man!
Looks like my issue was instead of using ethash i needed to use etchash (like i said something stupid as per the usual)
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)
by
jakebot
on 22/12/2020, 22:10:36 UTC
Quote from: Metroid on Today at 08:59:54 PM
ETC is not using ethash anymore, while they are still somewhat similar, there are some notable changes, so you will need to work on it to fix the stale shares and lower hashrate, my recommendation is to get back to default speed and then work you way from there. I myself have a rx 470 and changing it from eth to etc had no changes in hashrate or stale shares but my card has minimal overclock.

Well there it is. Something stupid I overlooked.  I'll start there and dig in.
I use ethermine (or whatever it's called now) for my pool and it was detected just giving all bad shares.
I run bios modded and overclocked (fairly aggressively though as I pay a flat fee for power) on mostly rx570s with a few stock bios rx-580s and one rx-480.

Thanks Metroid I will dig in more.
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)
by
jakebot
on 22/12/2020, 20:50:23 UTC
I'm having a little trouble with getting ETC mining to work on Team Red miner.
I've been mining ETH for a bit on it and after switching i'm getting a crazy amount of bad shares and much lower hash rate.
The config is virtually the same so I'm not sure what I could be doing wrong. I wouldn't think it's my OC as they have worked fine with everything else I have mined. XMR, RVN, ZEC etc...

I'm hoping i'm being an air head and just missing something....?
I'm preparing for ETH DAG EPOC #384
Post
Topic
Board Announcements (Altcoins)
Re: [ANN]Cash2 - Cash Version 2
by
jakebot
on 10/04/2019, 15:15:57 UTC
Any word on profitability with these A3 door stops? We got several sitting.
Post
Topic
Board Mining (Altcoins)
Re: Z9 list of working pools/Fork updates
by
jakebot
on 26/06/2018, 16:50:39 UTC
Quote from: saltyminer on June 26, 2018, 04:24:38 PM
Quote from: jakebot on June 26, 2018, 03:40:24 PM
Quote from: saltyminer on June 26, 2018, 01:52:42 PM
Pool operator here at https://bitpoolmining.com.  Will someone kindly please test our KMD pool, I will gladly give a little reward for your time.  Still waiting on our Z9 and need someone to help us test.

stratum+tcp://us-east.kmd.bitpoolmining.com
port: 3036
username: KMD address
pwd = x

I really appreciate it, thanks!

https://www.bitpoolmining.com/minerkmd/RSdMRYeeouw3hepxNgUzHn34qFhn1tsubb

Evidently I can't PM you because I'm a newb.

Thanks jakebot, I just sent you 10KMD for testing.  I can see your shares coming in fine and the website is working as expected.

If anyone else is will to test I will also give a 10KMD reward, I am trying to do some testing on the efficiency of the pool with asics and any help would be really awesome. 

Well you likely just donated that 10KMD to yourself as I was mining using your pools donation wallet address. I will get at you another time when I have a KMD wallet setup. Oh and change your setting so us newbs can send you a message
Post
Topic
Board Mining (Altcoins)
Re: Z9 list of working pools/Fork updates
by
jakebot
on 26/06/2018, 16:48:42 UTC
Quote from: G-Mine on June 26, 2018, 04:31:43 PM
Quote from: jakebot on June 26, 2018, 03:20:22 PM
Quote from: mfurman on June 25, 2018, 11:38:40 AM
I might be not looking right at Flypool help files but what is exactly their setup for ZEC, please? I mean, is it just:

Server   asia1-zcash.flypool.org   eu1-zcash.flypool.org   us1-zcash.flypool.org
Stratum Port   3333
Alt. Stratum Port   13333
Encrypted Stratum Portt   3443 (Encrypted stratum is currently only supported by the Claymore and Optiminer miner)
Username   Your Zcash Address e.g.: t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51
Password   Leave empty or enter your custom share difficulty (default difficulty is 2000)


or more elaborate



They did not respond to my question, yet. Thank you.

stratum+tcp://us1-zcash.flypool.org:3333
walletaddress.workername
blank


Hmmm doesn't work for me... flypool only shows 320 h/s after 10min... 12 shares

edit: the eu version seems to work better... maybe I'm just to impatient. I'll give it an hour.

Be patient, give it time.
Post
Topic
Board Mining (Altcoins)
Re: Z9 list of working pools/Fork updates
by
jakebot
on 26/06/2018, 15:40:24 UTC
Quote from: saltyminer on June 26, 2018, 01:52:42 PM
Pool operator here at https://bitpoolmining.com.  Will someone kindly please test our KMD pool, I will gladly give a little reward for your time.  Still waiting on our Z9 and need someone to help us test.

stratum+tcp://us-east.kmd.bitpoolmining.com
port: 3036
username: KMD address
pwd = x

I really appreciate it, thanks!

https://www.bitpoolmining.com/minerkmd/RSdMRYeeouw3hepxNgUzHn34qFhn1tsubb

Evidently I can't PM you because I'm a newb.
Post
Topic
Board Mining (Altcoins)
Re: Z9 list of working pools/Fork updates
by
jakebot
on 26/06/2018, 15:20:22 UTC
Quote from: mfurman on June 25, 2018, 11:38:40 AM
I might be not looking right at Flypool help files but what is exactly their setup for ZEC, please? I mean, is it just:

Server   asia1-zcash.flypool.org   eu1-zcash.flypool.org   us1-zcash.flypool.org
Stratum Port   3333
Alt. Stratum Port   13333
Encrypted Stratum Portt   3443 (Encrypted stratum is currently only supported by the Claymore and Optiminer miner)
Username   Your Zcash Address e.g.: t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51
Password   Leave empty or enter your custom share difficulty (default difficulty is 2000)


or more elaborate



They did not respond to my question, yet. Thank you.

stratum+tcp://us1-zcash.flypool.org:3333
walletaddress.workername
blank
Post
Topic
Board Mining (Altcoins)
Re: Z9 list of working pools/Fork updates
by
jakebot
on 26/06/2018, 15:13:42 UTC
Quote from: mattaero on June 26, 2018, 03:11:19 PM
Quote from: Sprucemoose78 on June 26, 2018, 01:25:56 PM
Just curious what temperatures would be considered "safe". I received my Z9 mini yesterday, and I bumped it up to 750MHz almost right away. It mines at Flypool at an average of 16.4kSol/s (measured poolside). Rejected shares at appr. 0.4% and stale shares at 0.2% according to the miner interface. Now, this time of year it gets pretty hot outside, and I have the asic in my garage, which is even hotter. Chip temps are 74, 76 and 78 degrees (midday) while PCB-temp is 59, 62 and 63 degrees. Last evening/night the chip-temps were below 70 degrees. No registered HW errors.

Back down on the overclock or continue to let it rip?

From what I have read and even from my experience with GPUs sub 80 is your best bet.  The higher it goes the more likely there will be errors and you will shorten the life span.  Personally, I try and keep them at the mid to low 70s because I don't want to be unlucky and have to crap out in 8 months or something.  I am also going to buy a second Delta fan to augment it.  These temps are very good considering there is only the one fan!

I don't have a komodo wallet yet but I will point it there if you give me a wallet address
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
jakebot
on 16/05/2018, 21:00:48 UTC
Quote from: AlHaymon on April 24, 2018, 06:52:41 PM
I'm wanting to try SMOS, but I don't want to flash the latest bios on my mobo. If my bios aren't compatible will SMOS even fire up or will it simply crash later on?

It's mostly a suggestion. I have had SMOS running on 10 year old hardware with no issues.
Post
Topic
Board Mining (Altcoins)
Re: Bitmain launches the Z9 Equihash miner
by
jakebot
on 09/05/2018, 18:30:14 UTC
I've been into mining for a little over a year now and I purchased this equiasic as my first. I hope they don't fork.
Post
Topic
Board Mining (Altcoins)
Re: Bitmain launches the Z9 Equihash miner
by
jakebot
on 03/05/2018, 21:26:55 UTC
Quote from: art29 on May 03, 2018, 09:16:43 PM
Quote from: rdluffy on May 03, 2018, 08:53:46 PM
Quote from: gameboy366 on May 03, 2018, 04:06:30 PM
Quote from: rdluffy on May 03, 2018, 03:58:50 PM
It's happening, the idea of decentralization are gone

Let's make Bitmain more powerful than ever, let's forget about tech and such ideas

The real purpose is money, money, money, let's squeeze everything until ends very soon
Gpu don't gurantee decentralisation and in real world less then .1% miner actually cares about tech. It was always about money. This is how you survive and thrive in a capitalist/realist world.

Yes, GPU guarantee decentralization, it worked and it's working

Cryptos are supposed to fight against monetary system, banks etc, not being equal to

We can all buy these units= decentralized.
Bitmain should always keep it to 1 unit per customer, unless they want another fork situation to happen. I think they have learned from their mistake.

^yup.^
Post
Topic
Board Speculation (Altcoins)
Re: Blood bath! Bubble burst?
by
jakebot
on 16/01/2018, 15:02:08 UTC
WOOHOO!

Everything is on sale!!!

BUY! BUY! BUY!
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
jakebot
on 10/01/2018, 20:39:50 UTC
Quote from: crushed on January 10, 2018, 08:11:53 PM
Quote from: JesterBB on January 10, 2018, 08:05:34 PM
Quote from: Zhack on January 09, 2018, 09:45:40 PM
Anyone run with tb250-btc pro with 12 amd cards. Or can i run same 12 x rx 580 cards with simplemining os? I'cant find any info about this.

Yes you can. SMOS supports 12 cards so if you change your bios settings and update the latest bios for mobo you can smoothly run 12 rx580 cards on biostar tb250 btc pro.

There is nothing smooth about those Biostar TB250 boards. They are more difficult than they need to be. Their previous TB85 boards were much easier to get up and running. Be careful about updating to the latest BIOS version. I had difficulties with the TB250-BTC and BTC+ boards until I rolled back the bios to a much earlier 330 version.

I too am having issues with this board. I have another one but it's too far away to get to to check all my bios setting with my new one. When Windows started to boot it was hanging. I deduced that it is not a GPU or RAM issue. I overlooked the BIOS (but I did update it) so that could definitely be the issue. What were you experiencing?
Post
Topic
Board Announcements (Altcoins)
Re: [LAUNCHED][POW]⚡ELECTRONEUM⚡Official Moderated Thread
by
jakebot
on 21/12/2017, 19:25:31 UTC
I would like to see it stay where it's again until the team can get everything working properly and THEN I want to see celeb endorsements while seeing it added to better exchanges like bittrex which i'm sure will pick it up eventually. THEN BOOM MOON.
Post
Topic
Board Mining (Altcoins)
Re: Will somebody please help with ASRock FM2A88X PRO3+?
by
jakebot
on 19/10/2017, 17:16:37 UTC
BIOS update did it. I feel like a fool for not thinking of it. Thanks!!!
Post
Topic
Board Mining (Altcoins)
Re: Will somebody please help with ASRock FM2A88X PRO3+?
by
jakebot
on 18/10/2017, 20:22:54 UTC
I did not. I will try that.

I do not expect it to help unless this is a known issue however.

Any other ideas? Anybody out there have experience with this board?
Post
Topic
Board Mining (Altcoins)
Will somebody please help with ASRock FM2A88X PRO3+?
by
jakebot
on 18/10/2017, 18:56:55 UTC
I'm unable to get more than 2 GPU's to be detected in SMOS with this motherboard.
I have the molex for the motherboard plugged in.

Any ideas?
TIA
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
jakebot
on 06/10/2017, 20:01:04 UTC
Quote from: illanz on October 06, 2017, 06:44:57 PM
Quote from: illanz on October 06, 2017, 06:07:46 AM
Hi
I'm not able to boot properly biostar with tb250 btc pro.
11x rx580 8g nitro +
Can someone share it's bios settings ?
All i have is a black screen. On sometimes à Black screen with à little white horizontal bar at the top left side
Thank you I spent 10hrs on it, going crazy

Usb stick is ok because 1 gpu runs fine...

24 hours later and hundreds of tests.
Still unable to boot...

I have tried pcie configuration to auto gen1 gen2 gen3.

Sometimes i have an infinite scroll of pcie errors but nothing more..

No answer from support

Is someone running biostar 12x AMD ?? Please share your settings.

For now I'm done with SMOS



The best BIOS settings are here under the installation section on the right.

https://simplemining.net/
Post
Topic
Board Mining (Altcoins)
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
by
jakebot
on 19/08/2017, 20:04:10 UTC
I'm REALLY struggling to get SMOS to dual mine ETH+SIA..... not sure where I went wrong could somebody please aid me that is dual mining sia and eth?

-epool stratum+tcp://us1.ethermine.org:4444 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -dpool sia-us-east1.nanopool.org:7777/miner/header?address=$walletSC&worker=simpleminer -dcoin sia -dcri 16 -mport -3333