Search content
Sort by
Showing 18 of 18 results by k3rt
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.7 (Linux / Windows)
@dstm
It seems to be there is a problem that might be related to the miner code. Sometimes the latency would just jump and the router hang:
This happens to me only when using ZMiner (using flypool to mine). It can happen 1-2 times per day and would stop router to work properly - making the whole LAN unusable.
I have called to ISP service and they said during this break, the router would spam their equipment with errors.
I am not 100% sure ZM causes this though. I can only say, that using other miners/scripts/pools doesn't create this kind of problem - only happens while using ZM and flypool.
It seems to be there is a problem that might be related to the miner code. Sometimes the latency would just jump and the router hang:
Code:
GPU0 60C Sol/s: 469.0 Sol/W: 3.15 Avg: 465.0 I/s: 249.3 Sh: 2.49 1.00 10141 +
GPU1 65C Sol/s: 466.1 Sol/W: 3.14 Avg: 464.2 I/s: 248.2 Sh: 1.49 0.67 40
========== Sol/s: 935.1 Sol/W: 3.15 Avg: 929.1 I/s: 497.6 Sh: 3.99 0.88 5090
GPU0 61C Sol/s: 466.0 Sol/W: 3.16 Avg: 465.1 I/s: 249.4 Sh: 2.14 1.00 10141
GPU1 65C Sol/s: 464.5 Sol/W: 3.14 Avg: 464.2 I/s: 248.1 Sh: 1.71 0.75 43 +
========== Sol/s: 930.6 Sol/W: 3.15 Avg: 929.3 I/s: 497.6 Sh: 3.84 0.90 5092
GPU0 61C Sol/s: 463.7 Sol/W: 3.15 Avg: 464.9 I/s: 249.5 Sh: 2.24 1.00 40 +
GPU1 65C Sol/s: 457.1 Sol/W: 3.13 Avg: 463.3 I/s: 248.3 Sh: 2.24 0.83 41 ++
========== Sol/s: 920.8 Sol/W: 3.14 Avg: 928.3 I/s: 497.8 Sh: 4.48 0.92 40
GPU0 61C Sol/s: 455.1 Sol/W: 3.15 Avg: 463.8 I/s: 249.4 Sh: 2.33 1.00 41 +
GPU1 65C Sol/s: 458.9 Sol/W: 3.12 Avg: 462.8 I/s: 248.3 Sh: 2.32 0.86 41 +
GPU1 65C Sol/s: 466.1 Sol/W: 3.14 Avg: 464.2 I/s: 248.2 Sh: 1.49 0.67 40
========== Sol/s: 935.1 Sol/W: 3.15 Avg: 929.1 I/s: 497.6 Sh: 3.99 0.88 5090
GPU0 61C Sol/s: 466.0 Sol/W: 3.16 Avg: 465.1 I/s: 249.4 Sh: 2.14 1.00 10141
GPU1 65C Sol/s: 464.5 Sol/W: 3.14 Avg: 464.2 I/s: 248.1 Sh: 1.71 0.75 43 +
========== Sol/s: 930.6 Sol/W: 3.15 Avg: 929.3 I/s: 497.6 Sh: 3.84 0.90 5092
GPU0 61C Sol/s: 463.7 Sol/W: 3.15 Avg: 464.9 I/s: 249.5 Sh: 2.24 1.00 40 +
GPU1 65C Sol/s: 457.1 Sol/W: 3.13 Avg: 463.3 I/s: 248.3 Sh: 2.24 0.83 41 ++
========== Sol/s: 920.8 Sol/W: 3.14 Avg: 928.3 I/s: 497.8 Sh: 4.48 0.92 40
GPU0 61C Sol/s: 455.1 Sol/W: 3.15 Avg: 463.8 I/s: 249.4 Sh: 2.33 1.00 41 +
GPU1 65C Sol/s: 458.9 Sol/W: 3.12 Avg: 462.8 I/s: 248.3 Sh: 2.32 0.86 41 +
This happens to me only when using ZMiner (using flypool to mine). It can happen 1-2 times per day and would stop router to work properly - making the whole LAN unusable.
I have called to ISP service and they said during this break, the router would spam their equipment with errors.
I am not 100% sure ZM causes this though. I can only say, that using other miners/scripts/pools doesn't create this kind of problem - only happens while using ZM and flypool.
Code:
--mem-clock=3505 Set the gpu memory max clock (346.72+ driver)
--gpu-clock=1150 Set the gpu engine max clock (346.72+ driver)
--pstate=0[,2] Set the gpu power state (352.21+ driver)
--plimit=100W Set the gpu power limit (352.21+ driver)
Do those options will auto-overclock my GPU, or are they work as the max limit (making sure clock/temp/power doesn't go above set value)?--gpu-clock=1150 Set the gpu engine max clock (346.72+ driver)
--pstate=0[,2] Set the gpu power state (352.21+ driver)
--plimit=100W Set the gpu power limit (352.21+ driver)
Re: Monacoin Hashrate lower than reported - ASIC pool & Suprnova - servers Skimming?
Have the same problem. Using Ubuntu 16.04 LTS, nVidia 384 dirver, CUDA toolkit, using ccminer, mining on ASICPool:
https://preview.ibb.co/hTQxEb/img.jpg
- ZCash on flypool, DSTM ZCash Miner - quite accurate
- Feathercoin on Give-me-coins, ccminer - weird hashrate
- Monacoin on ASICPool, ccminer - weird hashrate
- NewScrypt on NiceHash, ccminer - quite accurate
https://preview.ibb.co/hTQxEb/img.jpg
- ZCash on flypool, DSTM ZCash Miner - quite accurate
- Feathercoin on Give-me-coins, ccminer - weird hashrate
- Monacoin on ASICPool, ccminer - weird hashrate
- NewScrypt on NiceHash, ccminer - quite accurate
Re: HOW TO SET UP OVERCLOCKING AND FAN CONTROL ON UBUNTU 16.04 FOR NVIDIA CARDS
This is the output from nvidia-smi -q -d CLOCK:
- Does Graphics: 1657 MHz stand for CPU Clock?
- Does Max Clocks / Graphics: 1900 MHz means I can rise it to 1900 without any harm to the GPU?
I've noticed that chaning GPUGraphicsMemoryOffset changes Graphics precisely. Changing GPUMemoryTransferRateOffset affect Memory but a bit weird, e.g.:
Will set Memory to 3999 (4000 is the max value??).
Can someone with more experience provide some explanation?
Code:
==============NVSMI LOG==============
Timestamp : Mon Dec 4 19:05:48 2017
Driver Version : 384.98
Attached GPUs : 2
GPU 00000000:01:00.0
Clocks
Graphics : 1657 MHz
SM : 1657 MHz
Memory : 3802 MHz
Video : 1480 MHz
Applications Clocks
Graphics : N/A
Memory : N/A
Default Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : 1974 MHz
SM : 1974 MHz
Memory : 4004 MHz
Video : 1708 MHz
Max Customer Boost Clocks
Graphics : N/A
SM Clock Samples
Duration : 4.36 sec
Number of Samples : 100
Max : 1733 MHz
Min : 1620 MHz
Avg : 1682 MHz
Memory Clock Samples
Duration : 4.36 sec
Number of Samples : 100
Max : 3802 MHz
Min : 3802 MHz
Avg : 3802 MHz
Clock Policy
Auto Boost : N/A
Auto Boost Default : N/A
Timestamp : Mon Dec 4 19:05:48 2017
Driver Version : 384.98
Attached GPUs : 2
GPU 00000000:01:00.0
Clocks
Graphics : 1657 MHz
SM : 1657 MHz
Memory : 3802 MHz
Video : 1480 MHz
Applications Clocks
Graphics : N/A
Memory : N/A
Default Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : 1974 MHz
SM : 1974 MHz
Memory : 4004 MHz
Video : 1708 MHz
Max Customer Boost Clocks
Graphics : N/A
SM Clock Samples
Duration : 4.36 sec
Number of Samples : 100
Max : 1733 MHz
Min : 1620 MHz
Avg : 1682 MHz
Memory Clock Samples
Duration : 4.36 sec
Number of Samples : 100
Max : 3802 MHz
Min : 3802 MHz
Avg : 3802 MHz
Clock Policy
Auto Boost : N/A
Auto Boost Default : N/A
- Does Graphics: 1657 MHz stand for CPU Clock?
- Does Max Clocks / Graphics: 1900 MHz means I can rise it to 1900 without any harm to the GPU?
I've noticed that chaning GPUGraphicsMemoryOffset changes Graphics precisely. Changing GPUMemoryTransferRateOffset affect Memory but a bit weird, e.g.:
Code:
Attribute 'GPUMemoryTransferRateOffset' (ubuntu:0[gpu:0]) assigned value 400.
Will set Memory to 3999 (4000 is the max value??).
Can someone with more experience provide some explanation?
My setup:
- x6 GTX 1070
- 1600 Watt PSU with x6 (6+2 and 6+2), x5 (stuff with bunch of molex and SATA adapters);
- x6 risers with 6pin
- So far tried to put one of x6 6+2 to power each GPU, use of of SATA adapter to power the 1 riser
Problem:
- It looks like SATA adapters would sometimes try to melt, because when I power on the PSU - it would shut down immediately (I even smelled burned plastic once).
Possible solution:
- Can I just use both 6+2 adapter of each cable, and just put 8pin to power GPU, while use the other 6pin with 6pin extender to power the riser? Will the 6+2, 6+2 cable handle this?
https://image.ibb.co/jAs44b/img1.jpg
See this image for what I mean:
https://image.ibb.co/eestxw/img2.png
P.S. Just to be crystal clear: 1 SATA --> 1 riser seems to be fine. But once I try to use 2 SATA on the same cable to power 2 risers (1 SATA to each riser) - the rig power would sometimes not start, and auto halt. I have only 5 SATA/Molex cables vs 6 (6+2, 6+2) cables - so I am 1 cable short for powering 6th riser.
- x6 GTX 1070
- 1600 Watt PSU with x6 (6+2 and 6+2), x5 (stuff with bunch of molex and SATA adapters);
- x6 risers with 6pin
- So far tried to put one of x6 6+2 to power each GPU, use of of SATA adapter to power the 1 riser
Problem:
- It looks like SATA adapters would sometimes try to melt, because when I power on the PSU - it would shut down immediately (I even smelled burned plastic once).
Possible solution:
- Can I just use both 6+2 adapter of each cable, and just put 8pin to power GPU, while use the other 6pin with 6pin extender to power the riser? Will the 6+2, 6+2 cable handle this?
https://image.ibb.co/jAs44b/img1.jpg
See this image for what I mean:
https://image.ibb.co/eestxw/img2.png
P.S. Just to be crystal clear: 1 SATA --> 1 riser seems to be fine. But once I try to use 2 SATA on the same cable to power 2 risers (1 SATA to each riser) - the rig power would sometimes not start, and auto halt. I have only 5 SATA/Molex cables vs 6 (6+2, 6+2) cables - so I am 1 cable short for powering 6th riser.
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.6 (Linux / Windows)
Can someone confirm which drivers work better for them on Ubuntu 16.04 LTS:
- 378 vs 384 vs (other versions) vs CUDA Toolkit?
- 378 vs 384 vs (other versions) vs CUDA Toolkit?
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.6 (Linux / Windows)
So I think for most of us, we use MSI Afterburner or EVGA Precision XOC.
What if I have a plain Ubuntu without the GUI? Just a terminal 
Since I want to control everything via SSH, without any GUI.
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.6 (Linux / Windows)
Bios mod for 1070 ?
Also PCI 1.0 mean pci 1x it's usual to get that when you use a riser, do you have the other gpu connected to a riser or directly on the mobo ?
So far I have:Also PCI 1.0 mean pci 1x it's usual to get that when you use a riser, do you have the other gpu connected to a riser or directly on the mobo ?
- MoBO Asus Z270P, BIOS 8010;
- x2 GeForce 1070, driver 384;
- Gen2 is set everywhere;
- Audio, SATA disabled;
- Primary display: PCIE, M.2: PCIE
Code:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
I am using Dynamode PCI-E x1 to 16x, 60 cм USB 3.0 Cable SATA to 6Pin Power ver.006C - each of 2 GPUs are connected directly to the MOBO. I am about to add 2 more 1070, and then 2 more.
So far getting 440-450 Sol/W on each GPU, 60-65C - stock.
There are some BIOS settings you should set:
1. Update BIOS to the latest version (or at least 06XX)
2. Disable PCIex power management
3. Set to Gen2 everywhere you find it (4 places)
4. Disable HD audio, serial port
5. Set primary display as PCIE
6. Set M.2 as PCIE
7. Enable Above 4G decoding
1. Update BIOS to the latest version (or at least 06XX)
2. Disable PCIex power management
3. Set to Gen2 everywhere you find it (4 places)
4. Disable HD audio, serial port
5. Set primary display as PCIE
6. Set M.2 as PCIE
7. Enable Above 4G decoding
Thank you for the input.
1. Ok, BIOS was already at 8010
2. Never found an option to do it, only CPU Power Management
3. Only had 3 places (I have only 1 item under PEG Port Configuration)
4. Ok
5. Ok
6. Ok
7. Ok
After doing this, I was managed to run 450 Sol/W on both GPUs using DSTM's ZCash Miner. So, mission complete so far.
Still lots, to learn.
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.6 (Linux / Windows)
@dstm thank you for the great tool!
I have recently joined to the mining community. Setup Ubuntu 16.04 LTS, using x2 1070 (planning to extend), BIOS 8010 (tweaked).
While running zm, getting:
Questions:
- Why GPU0 has PCI 1.0?
- Earlier this day, before some BIOS tweaks my GPU0 would have around 120 Sol/W. Curious whether this could be caused by PCI 1.0?
I have recently joined to the mining community. Setup Ubuntu 16.04 LTS, using x2 1070 (planning to extend), BIOS 8010 (tweaked).
While running zm, getting:
Code:
2017-11-27 07:10:53 PM|# GPU0 + GeForce GTX 1070 MB: 8112 PCI: 1:0
2017-11-27 07:10:53 PM|# GPU1 + GeForce GTX 1070 MB: 8114 PCI: 3:0
2017-11-27 07:10:53 PM|
2017-11-27 07:10:53 PM|# telemetry server started
2017-11-27 07:10:53 PM|# GPU0 connected to: eu1-zcash.flypool.org:3333
2017-11-27 07:10:55 PM|# GPU1 connected to: eu1-zcash.flypool.org:3333
2017-11-27 07:10:58 PM|# GPU0 server set difficulty to: 0004189374bc6a7ef9db22d0...
2017-11-27 07:11:00 PM|# GPU1 server set difficulty to: 0004189374bc6a7ef9db22d0...
2017-11-27 07:11:18 PM|> GPU0 44C Sol/s: 449.8 Sol/W: 3.05 Avg: 449.8 I/s: 240.8 Sh: 2.99 1.00 43 +
2017-11-27 07:11:20 PM|> GPU1 42C Sol/s: 454.4 Sol/W: 3.16 Avg: 454.4 I/s: 241.0 Sh: 0.00 . .
2017-11-27 07:11:20 PM| ========== Sol/s: 904.3 Sol/W: 3.11 Avg: 904.3 I/s: 481.7 Sh: 2.99 1.00 43
2017-11-27 07:11:38 PM| GPU0 49C Sol/s: 448.5 Sol/W: 3.05 Avg: 449.2 I/s: 238.9 Sh: 1.49 1.00 43
2017-11-27 07:11:40 PM| GPU1 47C Sol/s: 445.8 Sol/W: 3.09 Avg: 450.1 I/s: 238.9 Sh: 0.00 . .
2017-11-27 07:11:40 PM| ========== Sol/s: 894.3 Sol/W: 3.07 Avg: 899.3 I/s: 477.9 Sh: 1.49 1.00 43
2017-11-27 07:11:58 PM|> GPU0 53C Sol/s: 445.4 Sol/W: 3.05 Avg: 447.9 I/s: 238.4 Sh: 1.00 1.00 43
2017-11-27 07:12:00 PM| GPU1 51C Sol/s: 438.6 Sol/W: 3.05 Avg: 446.3 I/s: 238.6 Sh: 0.00 . .
2017-11-27 07:12:00 PM| ========== Sol/s: 884.0 Sol/W: 3.05 Avg: 894.2 I/s: 477.0 Sh: 1.00 1.00 43
2017-11-27 07:12:18 PM| GPU0 56C Sol/s: 448.2 Sol/W: 3.04 Avg: 448.0 I/s: 238.0 Sh: 0.75 1.00 43
2017-11-27 07:12:20 PM| GPU1 54C Sol/s: 433.2 Sol/W: 3.03 Avg: 443.0 I/s: 238.1 Sh: 0.75 1.00 383 +
2017-11-27 07:10:53 PM|# GPU1 + GeForce GTX 1070 MB: 8114 PCI: 3:0
2017-11-27 07:10:53 PM|
2017-11-27 07:10:53 PM|# telemetry server started
2017-11-27 07:10:53 PM|# GPU0 connected to: eu1-zcash.flypool.org:3333
2017-11-27 07:10:55 PM|# GPU1 connected to: eu1-zcash.flypool.org:3333
2017-11-27 07:10:58 PM|# GPU0 server set difficulty to: 0004189374bc6a7ef9db22d0...
2017-11-27 07:11:00 PM|# GPU1 server set difficulty to: 0004189374bc6a7ef9db22d0...
2017-11-27 07:11:18 PM|> GPU0 44C Sol/s: 449.8 Sol/W: 3.05 Avg: 449.8 I/s: 240.8 Sh: 2.99 1.00 43 +
2017-11-27 07:11:20 PM|> GPU1 42C Sol/s: 454.4 Sol/W: 3.16 Avg: 454.4 I/s: 241.0 Sh: 0.00 . .
2017-11-27 07:11:20 PM| ========== Sol/s: 904.3 Sol/W: 3.11 Avg: 904.3 I/s: 481.7 Sh: 2.99 1.00 43
2017-11-27 07:11:38 PM| GPU0 49C Sol/s: 448.5 Sol/W: 3.05 Avg: 449.2 I/s: 238.9 Sh: 1.49 1.00 43
2017-11-27 07:11:40 PM| GPU1 47C Sol/s: 445.8 Sol/W: 3.09 Avg: 450.1 I/s: 238.9 Sh: 0.00 . .
2017-11-27 07:11:40 PM| ========== Sol/s: 894.3 Sol/W: 3.07 Avg: 899.3 I/s: 477.9 Sh: 1.49 1.00 43
2017-11-27 07:11:58 PM|> GPU0 53C Sol/s: 445.4 Sol/W: 3.05 Avg: 447.9 I/s: 238.4 Sh: 1.00 1.00 43
2017-11-27 07:12:00 PM| GPU1 51C Sol/s: 438.6 Sol/W: 3.05 Avg: 446.3 I/s: 238.6 Sh: 0.00 . .
2017-11-27 07:12:00 PM| ========== Sol/s: 884.0 Sol/W: 3.05 Avg: 894.2 I/s: 477.0 Sh: 1.00 1.00 43
2017-11-27 07:12:18 PM| GPU0 56C Sol/s: 448.2 Sol/W: 3.04 Avg: 448.0 I/s: 238.0 Sh: 0.75 1.00 43
2017-11-27 07:12:20 PM| GPU1 54C Sol/s: 433.2 Sol/W: 3.03 Avg: 443.0 I/s: 238.1 Sh: 0.75 1.00 383 +
Questions:
- Why GPU0 has PCI 1.0?
- Earlier this day, before some BIOS tweaks my GPU0 would have around 120 Sol/W. Curious whether this could be caused by PCI 1.0?
Using:
- Asus Z270P
- Using GeForce GTX 1070 (all GPUs are the same)
Initially, when I've got the rig I tried to use Simpleminer. After 1 day of work and experiments it got this error.
Now I have installed a fresh Ubuntu 16.04 LTS myself and it gets the same error.
I have managed to fix it by updting grub with
But not sure whether it is a good idea. Pretty new to Linux, used this tutorial (https://blockoperations.com/build-6-gpu-zcash-headless-mining-rig-ubuntu-16-04-using-claymore/, I have skipped steps for AMD) to setup things. Still learning stuff.
- Asus Z270P
- Using GeForce GTX 1070 (all GPUs are the same)
Initially, when I've got the rig I tried to use Simpleminer. After 1 day of work and experiments it got this error.
Now I have installed a fresh Ubuntu 16.04 LTS myself and it gets the same error.
I have managed to fix it by updting grub with
Code:
pci=nomsi
But not sure whether it is a good idea. Pretty new to Linux, used this tutorial (https://blockoperations.com/build-6-gpu-zcash-headless-mining-rig-ubuntu-16-04-using-claymore/, I have skipped steps for AMD) to setup things. Still learning stuff.
Trying to assemble and run a new rig. Have installed Ubuntu 16.04, GPU drivers, set up 1st card - works fine, mining fine.
Now whenever I add 2nd graphics card - unable to load Ubuntu, getting a screen with errors. It seems that only 1 pci slot works.
https://preview.ibb.co/bY4bCm/20171127_170615.jpg
https://preview.ibb.co/dxBL56/20171127_172055.jpg
https://preview.ibb.co/h6ejXm/20171127_172828.jpg
https://preview.ibb.co/ghKjXm/20171127_172933.jpg
Now whenever I add 2nd graphics card - unable to load Ubuntu, getting a screen with errors. It seems that only 1 pci slot works.
https://preview.ibb.co/bY4bCm/20171127_170615.jpg
https://preview.ibb.co/dxBL56/20171127_172055.jpg
https://preview.ibb.co/h6ejXm/20171127_172828.jpg
https://preview.ibb.co/ghKjXm/20171127_172933.jpg
Assembled a new rig, Ubuntu 16.04, 1 GTX 1070 - works fine.
Now whenever I add 2nd 1070, unable to load Ubuntu - getting the screen with the messages running for eternity:
https://thumb.ibb.co/mCmpXm/20171127_170615.jpg
Now whenever I add 2nd 1070, unable to load Ubuntu - getting the screen with the messages running for eternity:
https://thumb.ibb.co/mCmpXm/20171127_170615.jpg
Those are the miners, that (looks like) are available to the SimpleMining users.
https://ibb.co/cMvfiR
So my tasks is:
1) Pick the miner that can mine ZCash
2) Get proper config for picked miner
https://ibb.co/cMvfiR
So my tasks is:
1) Pick the miner that can mine ZCash
2) Get proper config for picked miner
When trying to use:
getting:
So the problem is - how to get the proper config that could be used.
Code:
-wd 1 -r 1 --server zec-eu1.dwarfpool.com --user t1dizyWLyWnQqbFUGAbeyyDNoFqR5fDEAnn --pass x --port 3336 --cuda_devices 2
getting:
Quote
Applying CoreOffset: 100 MemoryOffset: 720 for GPU 1 with GPU Type: 3
Available power limit for GPU 1 is 75.00 W, 170.00 W
Applying PowerLimit: 170 watt for GPU 1
============ Starting Miner ===============
UNKNOWN OPTION --server
UNKNOWN OPTION zec-eu1.dwarfpool.com
UNKNOWN OPTION --user
UNKNOWN OPTION t1abcdDEyWnQqbFUGAbeyyDNoFqR5fDEAnn
UNKNOWN OPTION --pass
UNKNOWN OPTION x
UNKNOWN OPTION --port
UNKNOWN OPTION 3336
UNKNOWN OPTION --cuda_devices
UNKNOWN OPTION 2
Binary file (standard input) matche
Available power limit for GPU 1 is 75.00 W, 170.00 W
Applying PowerLimit: 170 watt for GPU 1
============ Starting Miner ===============
UNKNOWN OPTION --server
UNKNOWN OPTION zec-eu1.dwarfpool.com
UNKNOWN OPTION --user
UNKNOWN OPTION t1abcdDEyWnQqbFUGAbeyyDNoFqR5fDEAnn
UNKNOWN OPTION --pass
UNKNOWN OPTION x
UNKNOWN OPTION --port
UNKNOWN OPTION 3336
UNKNOWN OPTION --cuda_devices
UNKNOWN OPTION 2
Binary file (standard input) matche
So the problem is - how to get the proper config that could be used.
Using https://simplemining.net/ to control the rig. Have a bunch fo GeForce 1070 GPUs. Would like to mine ZCash from one of descent pools (e.g. http://dwarfpool.com/zec).
How does the config should look like? Smth like:
??
How does the config should look like? Smth like:
Code:
-wd 1 -r 1 -epool stratum+tcp://zec-eu1.dwarfpool.com:3336 -ewal wallet_name.rig_name -esm 0 -epsw x -allpools 1 -mport -3333
??