Good job, but there should also be --cuda-only option, also libapr is still required as shared library, not all distros have it installed default.
There is one more issue which was expected, RTX 3060ti/3070 if clocked a bit higher tend to corrupt DAG and produce only invalids, requires DAG checksum validation and repairing or some sort of low intensity DAG loading.

Yes, our latest image supports LHR gpus out of the box.

Hello, depending on miner sometimes you might need to add worker name, like t-rex for example requires adding --worker %rig_name%%miner_id% in advanced arguments or teamredminer --eth_worker=%rig_name%%miner_id%
Hostnames are set upon your ethernet hardware address, you are free to rename them in dashboard.

Hi, you can use ESC + 1,2,3 to hide/show cli tool screens.

25. September 2020 Update agent
Updated agent to 2.8.13.
Partially revert Navi OC sequence.
Fixes potential memory leak and hard lockup.
--
24. September 2020 Update agent and dashboard
This release presents complete overhauling of Navi(RX5500/5600/5700) overclocking experience. We are pleased to have increased stability and reduced as much as possible power usage.

Another voltage was introduced again for Navi series - SOC voltage. It is more advanced control over internal controller voltage. Please read disclaimer under the option in Worker configuration.

Updated agent to 2.8.12.
Added Navi SOC voltage with disclaimer of using it.
Added Vega56/64/Frontier MVDDCI voltage support.
Overhauled Navi OC procedures.
Fixed watchdog cli calling not sending notifications when triggered.
Added motherboard and bios information gathering.
--
11. September 2020 Update agent
Updated agent to 2.8.11-3
Fixes memory temperature target not working in case gpu temperature being too low.
--
25. August 2020 Update agent and dashboard
This update allows you to adjust memory controller voltage for AMD Navi(RX 5500/5600/5700) and AMD Polaris(RX 460/470/480/550/560/570/580/590).

Updated agent to 2.8.11-2
Added memory controller voltage for AMD Navi and Polaris.

Hi, yes you can. Only firstboot needs ethernet, after initial setup login via remote console/ssh/tty console and type mmp netconf, choose wifi, follow instructions to setup essid/wpa2.

Hello,
Seems like rig wasn’t updated more than 6 months. Easiest way is to unplug usb drive and put it on your desktop, backup config.json from 20mb partition, write newest image which is on dashboard-> get mmpos. Once written just restore config.json you’ve backed up in new image and plug it back in rig. Regarding phoenixminer, I am not aware of what’s changed except looking into phoenixminer official changelog. If 5.0 works ok, just use it as its stable. There is no speed increase in new versions.
Cheers

# 04. August 2020 Update agent and dashboard

This update allows you to set a temperature target based on memory temperature for AMD Vega or later cards. So if either temperature target is reached fan management adjusts the fans.

We also added a loyalty level for all users, it's based on your usage of the platform. You will get up to 25% bonus credits for every credit purchase based on your current level.

* Updated agent to 2.8.11-1
* Added memory temp target for AMD Vega+ fan management
* Added loyalty level and bonus

# 01. July 2020 Update agent

This update now allows you to perform agent and other system updates over remote console. We moved remote console to a separate process and also optimized that the console session stays open, even on agent restarts.

* Updated agent to 2.8.11
* Optimized CPU detection
* Optimized AMD Smart Tune (Hynix+Samsung memory)
* Optimized AMD Vega+ fan management
* MMPOS: Moved remote-console to separate process
* Optimized mmp-base for faster boot process

Hi,
mmpOS itself is linux and for a GPU to not get recognized is most likely misconfiguration in bios or pci early init problem. Try disabling fastboot and secureboot if any of these is enabled. Disable HD audio and set pcie speed to 2.0. Check if you have some legacy/uefi mix and set either all to legacy or all to uefi, make sure when using CSM to set "Other OS". These are the common issues that may cause this behaviour. I'd suggest joining discord/telegram channels for faster response and support.

Hi, yes its enough even for more than 4 GPUs.

# 07. June 2020 Update agent and dashboard

Ever wanted to know why that one card performs better than the other? Maybe its due to being different vendor.
We now show the vendor (MSI, ASUS, Evga, Gigabyte...) too.

We also added support to set a fixed fan speed per rig or gpu, so you can optimize your temperatures and fanspeed even better.


* Updated agent to 2.8.10
* Added support for per rig or gpu fixed fan speed mode
* Added reporting of GPU vendor in cli and dashboard
* Improved startup with slow drivers

* Updated: AMD driver to 5.6.2 in unstable variant.
* Fixes: AMD RX 5500/XT compatibility in some cases.
* Fixes: Low hashrate on some RX 5600/XT models.
* Updated: AMD driver to 5.4.25 in stable variant.
* Fixes: 5600/XT stability issues.

4Gen

Use latest TT-Miner
TT-Miner.exe -coin RVN -poolinfo -luck -P stratum+tcp://your-wallet.worker:x@pool:port

# 20. April 2020 Driver and kernel updates.

* Updated linux image to v2.8.15 - includes new kernel, AMD and NVIDIA driver.
* Updated NVIDIA driver to 440.82 in stable variant.
* Updated AMD driver to 5.4.15 in stable variant.
* Updated AMD driver to 5.4.16 in unstable variant.
* Updated linux kernel to 5.4.32 in stable variant.
* Some minor fixes and enhancements.
* Added new amdvbflash tool which can read and flash Navi(RX5500/5600/5700) bioses.

# 18. April 2020 Update agent and dashboard
This update added an advanced feature for users to specify their timings on vega cards manually.

We still recommend using low, medium or high smart tune, but now you can use custom tune too.

* Added Smart Tune custom, allowing your own timings for Vega 56/64/FE.
* Fixed Smart Tune for Vega with Hynix memory.

# 19. March 2020 Update agent and dashboard

* Updated agent to 2.8.8
* Agent now automatically adjusts timeouts to server based on connection time
* Notifications now display miner profile name on miner start/stop/restart
* Notifications now also display GPU Name+PCI-ID on low hashrate warnings

We have added Folding @ Home as "miner", it is intended for fighting with COVID-19 decease by providing compute workloads for solving potential vaccine https://foldingathome.org/2020/02/27/foldinghome-takes-up-the-fight-against-covid-19-2019-ncov/. When selected as coin[Folding at Home], set wallet name to none or something made up, same goes for pool, set hostname to non existing/non valid, it is not taken. If you have FaH passkey you can add it in advanced miner arguments[Miner profile] --passkey=yourpasskey .
!!! Warning !!!
All samples are downloaded in tmpfs so on reboots they do not persist, if you want to make it permanent - do not use usb drives and edit /opt/mmp/miners/foldingathome/mmp-stats.sh replacing storage="/run" with storage="/home" or some directory in non tmpfs.

This is not added for profit, so questions like "How do I get paid?" have simple answer - "You don't". You donate your compute resources for fighting not only with COVID-19 but other deadly deceases.
We will do everything we can to assist everyone who is willing to donate compute resources.
Stay safe, stay healthy, stay home and be responsible!

Feel free to join us on telegram or discord for more information.
https://discord.gg/P5J6Z5h and https://t.me/mmpos_intl

# 29. February 2020 - System driver upgrades

* Updated linux kernel to 5.4.22 in unstable.
* Updated AMD driver to 5.4.4 in unstable variant.
* Updated NVIDIA driver to 440.64 in unstable variant.
* Updated linux kernel to 4.19.101 in stable variant.
* Updated AMD driver to 5.2.7 in stable variant.
* Updated NVIDIA driver to 440.59 in stable variant.
* Added timeout during rig registered check for faster startup.
* Introduced per GEO Location mirrors for updating drivers.
* Introduced per GEO Location apt repository mirrors.

Check if you haven't set PCIe to 1.0 in bios, must be 2.0 or auto.