I just received my 2pac and I cannot get it to work correctly.

I consistently get "share above target" very few of my shares are getting accepted. Same issue on windows and linux machines.

I've tried at 100mhz and up to 200mhz. No change it the issue. I also use a powered hub, this is the only device on the hub currently.

http://puu.sh/zg3yh/59ce44f73d.png

Any help getting it to work would be appreciated. Thanks!

What I use to start it.

I am having a strange issue.

I am unable to adjust the clockspeed on my miner if I set it to anything other than 800 it fails to hash anything and stops responding
here are my settings
bfgminer.exe --scrypt -o stratum+tcp://poolurl.com:4224 -u bla.user -p password --no-longpoll -S MLD:\\.\COM5 --set MLD:clock=800 --verbose

This seems to be the only setting that works, If I set it higher, or lower it fails to respond. 800 is not even in your list of preset clock speeds. I've adjusted the power, lowered it, raised it, not difference. It is hashing at about 3.4Mh/s with HW:251/.20% in the last 21hrs.

Hi!

I thought a bit and made another improvement in the performance of the miner on the basis of parallel processing using technologies sse/avx/avx2. I included asm code from openssl. The version of T13.744 is in the Linux repo. Nominally, it shows an increase in the hashrate several times, but it's good to check that the rewards also increase.

Dev