How much units an Antminer S5 & S3 consume in a minute or an hour with normal , bronze & gold smps?
Please hep me guys.
As I understand, the S5 is on the order of 40 to 50% more efficient than the S3. The S3 is rated at around 360W at the wall and the S5 around 590W at the wall. Expect a 2 to 4% greater efficiency with Gold Vs Bronze supply.
Thanks for reply
I want to know exact unit to calculate electric bill. 1 unit = 1000 watts so how much time it will take for antminer s5/s3 to reach 1 unit of electricity with normal smps.
Post
Topic
BoardHardware
Re: ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH
by
mrc_spot
on 06/04/2015, 13:30:34 UTC
How much units an Antminer S5 & S3 consume in a minute or an hour with normal , bronze & gold smps?
I haven't used one before ever and would be awesome to have this new experience but am busy with exams this month . IF you'll still have it around may ,i might buy it .
My two S5 will arrive on Wednesday so I was thinking as using my one "Cooler Master Silent Pro 1200W Gold PSU" for both. Will that work? Also whats the difference between Gold & Bronze i.e. which one draws less power?
I don't think that will work. OgNasty review stated that with default setting the power consumption is about 661 watt.
the 661W number must be at the wall - the S5 spec indicates a draw of about 560-600W on 12V DC. I pushed a unit to 287.5MHz before it tripped my CS650M (gold ATX with 612.5W 12V rail - trips somewhere around 630W) and ran at 362.5MHz 24/7 for several days without issue, indicating about a 600-610W load on the 12V rail
a 1200W (GOLD - most are when over 1200W) PSU should be able to run two S5 units at stock, or if necessary slightly below. A bit of overhead is better (<95% load is a good target for the PSU), so a 1300W PSU would give you that overhead and likely allow a bit of overclocking to achieve 1.21TH/S5
dont o for a PSU any less than gold. The difference between gold and bronze at 90% load is about a 3-5% difference in efficiency (or ~50W on a 1200W draw) If this is ~$3/month more for electricity the savings will cover the higher PSU cost within a year or two, and the supply will be better quality and resale value
Thanks for the reply. I already bought Corsair CX750M for each, its cheap but I will go for the gold next time.
I don't know for some reason one of them gets tripped even at 350 frequency (May be it was heat). Now testing with updated firmware.
My two S5 will arrive on Wednesday so I was thinking as using my one "Cooler Master Silent Pro 1200W Gold PSU" for both. Will that work? Also whats the difference between Gold & Bronze i.e. which one draws less power?
Post
Topic
BoardHardware
Re: Antminer S5 power suply
by
mrc_spot
on 05/01/2015, 06:19:17 UTC
My two S5 will arrive on Wednesday so I was thinking as using my one "Cooler Master Silent Pro 1200W Gold PSU" for both. Will that work? Also whats the difference between Gold & Bronze i.e. which one draws less power?
Post
Topic
BoardMarketplace (India)
Topic OP
I want to buy Bitcoin (purchased)
by
mrc_spot
on 24/12/2014, 04:39:37 UTC
I want to buy 2.9 bitcoins, rates & city
Post
Topic
BoardMarketplace (India)
Re: Buying/Selling Bitcoins
by
mrc_spot
on 24/12/2014, 04:13:43 UTC
Want to buy 3 bitcoins for Rs.21000/- @ cash mumbai
call: 9167272282
purchase complete
Post
Topic
BoardMarketplace (India)
Re: BUY/SELL BITCOINS
by
mrc_spot
on 23/12/2014, 09:37:55 UTC
Want to buy 3 bitcoins for Rs.21000/- @ cash mumbai
call: 9167272282
purchase complete
Post
Topic
BoardMarketplace (India)
Re: I want to buy bitcoin!
by
mrc_spot
on 23/12/2014, 09:29:54 UTC
Want to buy 3 bitcoins for Rs.21000/- @ cash mumbai
call: 9167272282
purchase complete
Post
Topic
BoardMarketplace (India)
Re: BUY/SELL BITCOINS
by
mrc_spot
on 23/12/2014, 09:21:18 UTC
Want to buy 3 bitcoins for Rs.21000/- @ cash mumbai
the fan works for 1-2 seconds, lan blinking red and green, then fan going out and the LED on the Lan is Blinking RED
i can not go on 196.168.1.99
i can´t see the miner in my fritzbox.
is not working:( what can i do?
I was having same problem with my miner. Your miner is not fully powered up. Switch of the power supply & turn on after 5m, make sure your power supply is dedicate to this miner (i.e. one power supply for one miner) Repeat the above step with a gap of 5m until your miner is fully powered up. If you succeed than set the frequency to s3+ default & reboot. Make sure your miner is powered up for 2 days. This will fix the problem, if not than change the power supply. Please let me know if it worked for you.
