Search content
Sort by
Showing 5 of 5 results by mw1
PICS COMING SOON, once ventilation work is done !
CURRENT : PROBLEMS
1> MOISTURE + MIST IN ENVIRONMENT
2> Wirings Are Not Good, Was Using Aluminium, switch to copper soon
CURRENT : PROBLEMS
1> MOISTURE + MIST IN ENVIRONMENT
2> Wirings Are Not Good, Was Using Aluminium, switch to copper soon
For wires, whether you stick with aluminum or go with copper, make sure they're sized properly. Most electricians I've seen in India will undersize the wire and this causes the wire to melt in the wall. Same reason it's always "when the wire melts" not "IF".
I always recommend a wire that's one gauge (or thickness level so .5-1.0mm in your case) thicker than needed for the breaker size. This way if there's an issue the breaker will trip and wire won't overheat/melt.
Moisture, there's a solution there too. Sent you a PM.
It's impossible to tell you what an individual card will produce in hashrates, only a general sense of what you can expect. There are way too many factors that play a part in hashrate... mining software, over/underclocks, not least of all the silicon lottery.
For motherboards, I highly suggest the boards that are made specifically for mining. They will give you the least amount of trouble since this appears to be your first real mining rig. As for dual mining... Sia and DCR are always favorites combined with Eth.
For motherboards, I highly suggest the boards that are made specifically for mining. They will give you the least amount of trouble since this appears to be your first real mining rig. As for dual mining... Sia and DCR are always favorites combined with Eth.
Which other mining ones are there other than the ASRock?
I understand that each card technically is unique, but the numbers should be somewhat similar.
Over/underclocks and software are the other things I'm wondering about.
I was thinking EthOS or Linux for the OS, and mining software again not 100% on that. Hence more questions
I personally have had great luck with the Powercooler Red Devils. My first Red Devil 480s are still churning after over a year of nonstop mining. Never had any issues.
What rates are you getting? The price difference between those and the XFX isn't much, but XFX seems to have a higher initial clock.
Been searching for days and no luck so thought it's time to ask.
My options for GPUs are:
1) XFX black
2) Asus Dual RX580
3) Gigabyte 580 Gaming
4) Powercolor Red Devil Radeon
5) MSI Radeon 580 V1
6) Gigabyte Aorus
7) MSI Radeon 580 Armor
MSI Radeon 580 Gaming
9) Powercolor Red Devil Golden
The XFX appears to have the highest clock rate (1425 OC), but other than that I can't find any hash rates for them.
They're all 8GB cards, and price range is within $10-20 for all.
ALso, motherboard to use?
I'm looking at picking up at least 5, and either straight mining Ether, or dual mining Ether plus something else (suggestions would be great).
If anybody has suggestions for the cards as well as other hardware I'd appreciate it.
Electricity wise I can run 110/120 or 220/240, just a matter of a quick wiring change.
Ideas?
Thanks
My options for GPUs are:
1) XFX black
2) Asus Dual RX580
3) Gigabyte 580 Gaming
4) Powercolor Red Devil Radeon
5) MSI Radeon 580 V1
6) Gigabyte Aorus
7) MSI Radeon 580 Armor
MSI Radeon 580 Gaming9) Powercolor Red Devil Golden
The XFX appears to have the highest clock rate (1425 OC), but other than that I can't find any hash rates for them.
They're all 8GB cards, and price range is within $10-20 for all.
ALso, motherboard to use?
I'm looking at picking up at least 5, and either straight mining Ether, or dual mining Ether plus something else (suggestions would be great).
If anybody has suggestions for the cards as well as other hardware I'd appreciate it.
Electricity wise I can run 110/120 or 220/240, just a matter of a quick wiring change.
Ideas?
Thanks