Phantasma (SOUL) coin seems like a good investment at this point. It's MC is only 350 million but can/should easily be a 1 billion mc soon. At 1 bill marketcap it's worth $10.30 and that's a 3x. But I can see  it being a 4-5 billion marketcap ($40-$50+ a coin).

The trick with CB and CB pro is that you attach your bank via plaid to Coinbase. Then you're able to deposit up to $100k a day. Instead of depositing USD into Cb pro, try buying USDC on Coinbase using your bank account. The transaction is free. Deposit the USDC into CD Pro and buy whatever it is you want (because the fees are a lot less than on CB). Once you have the coin you want, you are able to immediately withdraw it. I haven't had any issues with or having it held on Coinbase for an extended period of time.

Kernal log below:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc:

• 0
• 1

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203752K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25624K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
   Build-time adjustment of leaf fanout to 32.
   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12584K (cceb7000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 15/6, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 3460/785, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb34000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2021-04-10 17:12:48 driver-btm-api.c:663:init_freq_mode: This is scan-user version
2021-04-10 17:12:48 driver-btm-api.c:2028:bitmain_soc_init: opt_multi_version     = 1
2021-04-10 17:12:48 driver-btm-api.c:2029:bitmain_soc_init: opt_bitmain_ab        = 1
2021-04-10 17:12:48 driver-btm-api.c:2030:bitmain_soc_init: opt_bitmain_work_mode = 0
2021-04-10 17:12:48 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17
2021-04-10 17:12:48 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04
2021-04-10 17:12:48 driver-btm-api.c:1844:show_sn: no SN got, please write SN to /nvdata/sn
2021-04-10 17:12:48 driver-btm-api.c:1167:miner_device_init: Detect 256MB control board of XILINX
2021-04-10 17:12:48 driver-btm-api.c:1115:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-04-10 17:12:48 thread.c:885:create_read_nonce_reg_thread: create thread
2021-04-10 17:12:54 driver-btm-api.c:1099:init_miner_version: miner ID : 8024842a7910481c
2021-04-10 17:12:54 driver-btm-api.c:1105:init_miner_version: FPGA Version = 0xB013
2021-04-10 17:12:56 eeprom.c:431:check_pattern_test_level: L1 board
2021-04-10 17:12:58 eeprom.c:431:check_pattern_test_level: L1 board
2021-04-10 17:13:00 eeprom.c:431:check_pattern_test_level: L1 board
2021-04-10 17:13:00 driver-btm-api.c:737:get_product_id: product_id[0] = 1
2021-04-10 17:13:00 driver-btm-api.c:737:get_product_id: product_id[1] = 1
2021-04-10 17:13:00 driver-btm-api.c:737:get_product_id: product_id[2] = 1
2021-04-10 17:13:00 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[0] = 1
2021-04-10 17:13:00 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[1] = 1
2021-04-10 17:13:00 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[2] = 1
2021-04-10 17:13:00 driver-btm-api.c:1919:bitmain_board_init: g_ccdly_opt = 1
2021-04-10 17:13:00 driver-btm-api.c:676:_set_project_type: project:2
2021-04-10 17:13:00 driver-btm-api.c:706:_set_project_type: Project type: Antminer T17
2021-04-10 17:13:00 driver-btm-api.c:717:dump_pcb_bom_version: Chain

• PCB Version: 0x0100

2021-04-10 17:13:00 driver-btm-api.c:718:dump_pcb_bom_version: Chain

• BOM Version: 0x0100

2021-04-10 17:13:00 driver-btm-api.c:717:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2021-04-10 17:13:00 driver-btm-api.c:718:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-04-10 17:13:00 driver-btm-api.c:717:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2021-04-10 17:13:00 driver-btm-api.c:718:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-04-10 17:13:01 driver-btm-api.c:1939:bitmain_board_init: Fan check passed.
2021-04-10 17:13:03 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-04-10 17:13:06 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-04-10 17:13:08 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-04-10 17:13:11 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-04-10 17:13:13 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-04-10 17:13:17 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-04-10 17:13:17 thread.c:880:create_pic_heart_beat_thread: create thread
2021-04-10 17:13:17 power_api.c:55:power_init: power init ...
2021-04-10 17:13:17 driver-btm-api.c:1949:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-04-10 17:13:17 power_api.c:46:power_off: init gpio907
2021-04-10 17:13:49 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ...
2021-04-10 17:13:54 power_api.c:124:check_voltage_multi: retry time: 0
2021-04-10 17:13:56 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.450683
2021-04-10 17:13:58 power_api.c:86:get_average_voltage: chain[1], voltage is: 16.783271
2021-04-10 17:14:00 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.795517
2021-04-10 17:14:00 power_api.c:97:get_average_voltage: aveage voltage is: 17.009824
2021-04-10 17:14:00 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000
2021-04-10 17:14:00 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26
2021-04-10 17:14:11 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0

https://ibb.co/5Gsp79Z

I have an Antminer T17. It saus socket connect failed: connection refused. What does this mean, and how do I resolve the issue? I have tried rebooting it already.

still avsailable?

Anyone know why the gh/s rate is so low? My other antminer's gh/s averages 13,615. Here is a screenshot of the summary.

https://ibb.co/wC5FZy3

Can someone help me understand what is going on with my Antminer S9? I copy and pasted the kernal log below.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0
• 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000308] ps7-ttc #0 at df804000, irq=43
[    0.000617] Console: colour dummy device 80x30
[    0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040208] pid_max: default: 32768 minimum: 301
[    0.040425] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040445] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042580] CPU: Testing write buffer coherency: ok
[    0.042917] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042977] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043202] L310 cache controller enabled
[    0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121033] CPU1: Booted secondary processor
[    0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210358] Brought up 2 CPUs
[    0.210377] SMP: Total of 2 processors activated.
[    0.210386] CPU: All CPU(s) started in SVC mode.
[    0.211047] devtmpfs: initialized
[    0.213462] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214673] regulator-dummy: no parameters
[    0.222343] NET: Registered protocol family 16
[    0.224627] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226913] cpuidle: using governor ladder
[    0.226926] cpuidle: using governor menu
[    0.234350] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235872] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235886] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.236001] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257825] bio: create slab <bio-0> at 0
[    0.259254] vgaarb: loaded
[    0.259965] SCSI subsystem initialized
[    0.260999] usbcore: registered new interface driver usbfs
[    0.261831] usbcore: registered new interface driver hub
[    0.262073] usbcore: registered new device driver usb
[    0.262602] media: Linux media interface: v0.10
[    0.262759] Linux video capture interface: v2.00
[    0.262999] pps_core: LinuxPPS API ver. 1 registered
[    0.263011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.263133] PTP clock support registered
[    0.263494] EDAC MC: Ver: 3.0.0
[    0.264532] Advanced Linux Sound Architecture Driver Initialized.
[    0.267358] DMA-API: preallocated 4096 debug entries
[    0.267372] DMA-API: debugging enabled by kernel config
[    0.267445] Switched to clocksource arm_global_timer
[    0.288011] NET: Registered protocol family 2
[    0.288666] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288723] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288808] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288858] TCP: reno registered
[    0.288876] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288908] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.289138] NET: Registered protocol family 1
[    0.289490] RPC: Registered named UNIX socket transport module.
[    0.289503] RPC: Registered udp transport module.
[    0.289512] RPC: Registered tcp transport module.
[    0.289520] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289534] PCI: CLS 0 bytes, default 64
[    0.289973] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.292003] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.294091] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.294292] msgmni has been set to 967
[    0.295074] io scheduler noop registered
[    0.295087] io scheduler deadline registered
[    0.295123] io scheduler cfq registered (default)
[    0.307721] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307742] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431163] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999088] console [ttyPS0] enabled
[    1.003365] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010989] [drm] Initialized drm 1.1.0 20060810
[    1.027967] brd: module loaded
[    1.037283] loop: module loaded
[    1.046730] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052556] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060525] libphy: XEMACPS mii bus: probed
[    1.064893] ------------- phy_id = 0x3625e62
[    1.069856] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085075] ehci-pci: EHCI PCI platform driver
[    1.092346] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099183] usbcore: registered new interface driver usb-storage
[    1.106016] mousedev: PS/2 mouse device common for all mice
[    1.112150] i2c /dev entries driver
[    1.119119] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124604] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130534] Xilinx Zynq CpuIdle Driver started
[    1.135375] sdhci: Secure Digital Host Controller Interface driver
[    1.141524] sdhci: Copyright(c) Pierre Ossman
[    1.145806] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152632] mmc0: no vqmmc regulator found
[    1.156642] mmc0: no vmmc regulator found
[    1.197465] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.206159] usbcore: registered new interface driver usbhid
[    1.211667] usbhid: USB HID core driver
[    1.216382] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222683] nand: Micron MT29F2G08ABAEAWP
[    1.226646] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232582] Bad block table found at page 131008, version 0x01
[    1.238805] Bad block table found at page 130944, version 0x01
[    1.244856] 3 ofpart partitions found on MTD device pl353-nand
[    1.250637] Creating 3 MTD partitions on "pl353-nand":
[    1.255728] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263770] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.271149] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.280092] TCP: cubic registered
[    1.283327] NET: Registered protocol family 17
[    1.288037] Registering SWP/SWPB emulation handler
[    1.293913] regulator-dummy: disabling
[    1.298282] UBI: attaching mtd1 to ubi0
[    1.824480] UBI: scanning is finished
[    1.836038] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.843116] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849879] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856544] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863421] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869402] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876510] UBI: max/mean erase counter: 52/24, WL threshold: 4096, image sequence number: 1283732989
[    1.885725] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894941] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.894947] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898902] ALSA device list:
[    1.898906]   No soundcards found.
[    1.915294] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.975346] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.981305] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.990408] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.000293] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.005322] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[    2.016845] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.024307] devtmpfs: mounted
[    2.027410] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.864115] random: dd urandom read with 0 bits of entropy available
[    3.257493]
[    3.257493] bcm54xx_config_init
[    3.867492]
[    3.867492] bcm54xx_config_init
[    7.868322] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.874428] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.429478] In axi fpga driver!
[   22.432551] request_mem_region OK!
[   22.435941] AXI fpga dev virtual address is 0xdf9fc000
[   22.441083] *base_vir_addr = 0x8c510
[   22.456564] In fpga mem driver!
[   22.459689] request_mem_region OK!
[   22.463196] fpga mem virtual address is 0xe2000000
[   23.256772]
[   23.256772] bcm54xx_config_init
[   23.886672]
[   23.886672] bcm54xx_config_init
[   27.887027] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   27.893133] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8058f5c67680881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[1] has core num=1
Chain[5] ASIC[4] has core num=1
Chain[5] ASIC[17] has core num=15
Chain[5] ASIC[19] has core num=1
Chain[5] ASIC[46] has core num=1
Chain[5] ASIC[51] has core num=15
Chain[5] ASIC[59] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[32] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1964 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8058f5c67680881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
get fan[2] speed=6120
get fan[5] speed=4560
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=890 [91]
Chain[J8] get working chain_voltage_pic=91
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 55 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 57 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[4] has core num=1
Chain[J6] ASIC[17] has core num=15
Chain[J6] ASIC[19] has core num=1
Chain[J6] ASIC[46] has core num=1
Chain[J6] ASIC[51] has core num=15
Chain[J6] ASIC[59] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[32] has core num=15
Chain[J8] has core num in PIC
miner total rate=13901GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=675
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=57
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631

Chain:7 max freq=631
Chain:7 min freq=631


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=675
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675
Detect a bad chip=17 on chain[5], fixed to 400M
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Detect a bad chip=51 on chain[5], fixed to 400M
Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Detect a bad chip=32 on chain[6], fixed to 400M
Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=57
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631

Chain:7 max freq=631
Chain:7 min freq=631

max freq = 675
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
Chain[J6] use default temp chip[244]
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[5] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[5] chip[244] local:-64 remote:0 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=00
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
Chain[J7] use default temp chip[244]
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[6] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[6] chip[244] local:-64 remote:0 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=00
single board rate=4690 voltage limit=870 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 870
retryFlag=1 will set the voltage limited on chain[5], change voltage=870
now set pic voltage=125 on chain[5]
single board rate=4679 voltage limit=870 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 870
retryFlag=1 will set the voltage limited on chain[6], change voltage=870
now set pic voltage=125 on chain[6]
single board rate=4531 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
retryFlag=1 will set the voltage limited on chain[7], change voltage=890
now set pic voltage=91 on chain[7]
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=0
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=12487

so unnecessarily hostile.

My 2140 price prediction: I predict 1 BTC will be worth 20 million dollars due to the fact I have no idea what I'm talking about.

I agree with the sentiment...just buy and HODL. It is a simple recipe for success if history continues to repeat itself.

"ANYTHING IN POSSIBLE!!!!!" -KEVIN GARNETT

it is never "out of reach". Stack the sats and hodl. Long term you'll thank yourself. Don't let price fluctuation or increase discourage you!

I think as someone who hodl's bitcoin, this is another pump and dump coin at best and the value isnt half what is right now but I will ride out this wave until it begins to depreciate.

Thanks for the shill. lol I bought at .13. sold at .24 and waiting to buy back for less. I have never traded alt coins before so I don't know what im doing but I think the basic rule of thumb is not to be greedy.

It just seems like for a coin that has a working product with millions of users and still growing rapidly would be a no brainer to invest heavily in.

I am a new user here although I have been investing in crypto since 2017 like many of you here. I have been looking at the bitcoin boards for several weeks now and just started browsing the altcoin board. I am wondering why BAT and the Brave browser, which has over 22 million MAU isn't more widely discusses in here? BAT seems extremely undervalued at the moment. How many other altcoins can say they have a working product that you use every single day? Am I missing something here? I dont understand why so many people poo poo on it.

It's because Justin Sun is a fraud! Just look at the all the replies when he tweets. TRX is shitcoin. You're better off selling any investment you made into it, good or bad.