Ninjastic
Search content
Sort by
Showing 20 of 54 results by sushsdawg
Post
Topic
Board Mining support
Re: S19 not hashing - ERROR_TEMP_TOO_HIGH
by
sushsdawg
on 12/11/2022, 22:13:32 UTC
Quote from: BitMaxz on November 07, 2022, 11:39:43 AM
What do you mean it works?

Is the issue solved after a hard reset? Is all the hash board running?
Or did you just run only two hash boards and remove the middle board?

If the middle hash board is the culprit having over temp issue there might be one ASIC chip with a loose heatsink it needs to reattach but the problem you will need test fixture to test which chip is overheating.

Anyway, if you want to repair it with your own there is a guide that you can follow but I'm sure it needs some repairing tools. Check this link below

- https://www.zeusbtc.com/manuals/Antminer-S19-Hash-Board-Repair-Guide.asp
Sorry for the delay - all 3 boards started working after your recommendation, and it seemed to have worked for couple of days.

I brought the machine back home from the data center, as I see i board running hotter. 2 boards have a 15/15 Inlet/Outlet temp, 1 has 42/65 temp on it.

Post
Topic
Board Mining support
Re: S19 not hashing - ERROR_TEMP_TOO_HIGH
by
sushsdawg
on 07/11/2022, 00:49:07 UTC
Quote from: BitMaxz on November 06, 2022, 11:53:56 PM
Also, try to hard reset the unit by holding the IP report button for 5 seconds or more then release then test it again and check for changes.

Thank you so much  @BitMaxz for helping me sort through this issue !!!
Post
Topic
Board Mining support
Re: S19 not hashing - ERROR_TEMP_TOO_HIGH
by
sushsdawg
on 07/11/2022, 00:36:22 UTC
Quote from: BitMaxz on November 06, 2022, 11:53:56 PM
I could't see which hashboard detect over temp would you mind to try to run the miner with one hashboard? I mean test them one by one disconnect the two hashboard power and data cable and test again to find what hashboard is broken.

Also, try to hard reset the unit by holding the IP report button for 5 seconds or more then release then test it again and check for changes.

This is interesting. So I got the middle board identified as the error.  the log is below.

I did do a hard reset this morning, and was still having the issue.  I did it again after identifying the board and now now it works.

Errror log with just the middle board running:

Code:
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209672K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19704K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6632K (cd480000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 12/4, WL threshold: 4096, image sequence number: 606679770
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 40C2E32E-4292-42D3-B3A6-4455C3E2D40A, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 3248766587
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID A9EF88C2-A577-4085-8DC6-BB5676C496A1, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5700000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x4
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 800aed042b10481c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x4
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:17 board num = 1
1970-01-01 00:00:17 board id = 2, chain num = 1
1970-01-01 00:00:17 chain id = 2
1970-01-01 00:00:17 ==========================capability end============================
1970-01-01 00:00:17 chain num = 1
1970-01-01 00:00:18 [chain 2]
1970-01-01 00:00:18 0x0000 11 42 84 E6 07 D3 6D B7   45 BE D3 05 4F 26 99 A6
1970-01-01 00:00:18 0x0010 95 99 40 22 CD CD B4 58   5E 7B 33 FE 4C 06 CD 92
1970-01-01 00:00:18 0x0020 E1 EA B3 D4 BE 5E 05 B9   54 E6 E6 7C B0 A4 F5 13
1970-01-01 00:00:18 0x0030 29 1D FC 20 06 55 C9 CB   D9 B3 1A 7C C3 C0 C0 C8
1970-01-01 00:00:18 0x0040 54 39 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
1970-01-01 00:00:18 fan_eft : 1  fan_pwm : 100
1970-01-01 00:00:18 create thread
1970-01-01 00:00:18 fixed working voltage = 1260
1970-01-01 00:00:18 Chain [2] PCB Version: 0x0100
1970-01-01 00:00:18 Chain [2] BOM Version: 0x0100
2022-11-07 00:19:44 Fan check passed.
2022-11-07 00:19:45 chain[2] PIC jump to app
2022-11-07 00:19:47 Check chain[2] PIC fw version=0x89
2022-11-07 00:19:47 create thread
2022-11-07 00:19:47 max sensor num = 4
2022-11-07 00:19:47 temperature_monitor_thread start...
2022-11-07 00:19:51 power type version: 0x0071
2022-11-07 00:19:51 Enter sleep to make sure power release finish.
2022-11-07 00:20:22 Slept 30 seconds, diff = 0.
2022-11-07 00:20:22 set_voltage_by_steps to 1500.
2022-11-07 00:20:25 chain avg vol rise to 15.33
2022-11-07 00:20:27 start up min temp by 75a = 0
2022-11-07 00:20:27 set UART baud to 115200
2022-11-07 00:20:34 Chain[2]: find 114 asic, times 0
2022-11-07 00:20:34 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2022-11-07 00:20:36 min freq in eeprom = 525
2022-11-07 00:20:36 fixed frequency is 525
2022-11-07 00:20:36 Bring up temperature is 0
2022-11-07 00:20:36 set UART baud to 12000000
2022-11-07 00:20:36 set_voltage_by_steps to 1310.
2022-11-07 00:20:43 STATUS_INITED: soc init done!
2022-11-07 00:20:43 create thread
2022-11-07 00:20:43 create thread
2022-11-07 00:20:44 fan_etf: Set fixed fan speed=100
2022-11-07 00:20:46 start to init...
2022-11-07 00:20:54 Init done!
2022-11-07 00:20:54 STATUS_OKAY
2022-11-07 00:20:54 start the cached job
2022-11-07 00:20:54 Version num 8
2022-11-07 00:20:54 Mask num 0xe000
2022-11-07 00:20:54 freq = 525, percent = 90, hcn = 12480, timeout = 449
2022-11-07 00:20:54 set_start_time_point total_tv_start_sys=97 total_tv_end_sys=98
2022-11-07 00:20:54 set_voltage_by_steps to 1335.
2022-11-07 00:21:03 over max temp, pcb temp 0 (max 80), chip temp 15(max 95) pcb temp rise 0 chip temp rise 0, total_exit_failure 0
2022-11-07 00:21:03 ERROR_TEMP_TOO_HIGH: over max temp
2022-11-07 00:21:03 stop_mining: over max temp
2022-11-07 00:21:03 uninit_temp_info
2022-11-07 00:21:03 do not read temp anymore...
2022-11-07 00:21:03 cancel thread
2022-11-07 00:21:03 cancel thread
2022-11-07 00:21:03 cancel thread
2022-11-07 00:21:03 ****power off hashboard****
2022-11-07 00:21:04 temp monitor thread exit
Post
Topic
Board Mining support
Topic OP
S19 not hashing - ERROR_TEMP_TOO_HIGH
by
sushsdawg
on 06/11/2022, 23:13:39 UTC
Hi, I have a few S19 Pro 110TH and only 1 stopped hashing.  I've not upgraded the FW or anything.  The room temps are fine, as all the other machines are chugging along ok too.  any idea what it could be, is it the sensor?  I opened it up, and the boards look pretty clean still - not sure what I need to look for next

Code:
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209672K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19704K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6632K (cd480000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 11/4, WL threshold: 4096, image sequence number: 606679770
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 40C2E32E-4292-42D3-B3A6-4455C3E2D40A, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 10/5, WL threshold: 4096, image sequence number: 3248766587
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID A9EF88C2-A577-4085-8DC6-BB5676C496A1, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 800aed042b10481c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 [chain 0]
1970-01-01 00:00:18 0x0000 11 42 FF CA A5 4F 2C 89   40 E0 CA F5 37 39 99 CC
1970-01-01 00:00:18 0x0010 9E AA 96 50 4C 78 B3 1B   EF AF 0A A9 F2 2C 76 EA
1970-01-01 00:00:18 0x0020 08 6E 3D 85 D7 E9 30 18   F9 DC 0D 3A 49 31 07 96
1970-01-01 00:00:18 0x0030 E0 B0 87 AF D8 A1 6E C1   94 2D 6F 95 D7 8E 1F D5
1970-01-01 00:00:18 0x0040 A1 3F FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
1970-01-01 00:00:20 [chain 1]
1970-01-01 00:00:20 0x0000 11 42 84 E6 07 D3 6D B7   45 BE D3 05 4F 26 99 A6
1970-01-01 00:00:20 0x0010 95 99 40 22 CD CD B4 58   5E 7B 33 FE 4C 06 CD 92
1970-01-01 00:00:20 0x0020 E1 EA B3 D4 BE 5E 05 B9   54 E6 E6 7C B0 A4 F5 13
1970-01-01 00:00:20 0x0030 29 1D FC 20 06 55 C9 CB   D9 B3 1A 7C C3 C0 C0 C8
1970-01-01 00:00:20 0x0040 54 39 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:20
2022-11-06 22:41:24 [chain 2]
2022-11-06 22:41:24 0x0000 11 42 12 DD 03 A1 CA F5   9C F2 CE 05 71 7F C0 51
2022-11-06 22:41:24 0x0010 90 4B 11 FE 63 76 EE 46   B1 23 12 C5 79 9D AD 80
2022-11-06 22:41:24 0x0020 66 07 A9 2F 59 A2 86 6F   C0 E2 E9 8B 42 82 74 C0
2022-11-06 22:41:24 0x0030 72 6D 6C 15 02 FA F6 CD   87 29 2D 3C ED 3B 01 32
2022-11-06 22:41:24 0x0040 FA B8 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-11-06 22:41:24 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2022-11-06 22:41:24
2022-11-06 22:41:24 fan_eft : 1  fan_pwm : 100
2022-11-06 22:41:24 create thread
2022-11-06 22:41:24 fixed working voltage = 1260
2022-11-06 22:41:24 Chain [0] PCB Version: 0x0100
2022-11-06 22:41:24 Chain [0] BOM Version: 0x0100
2022-11-06 22:41:24 Chain [1] PCB Version: 0x0100
2022-11-06 22:41:24 Chain [1] BOM Version: 0x0100
2022-11-06 22:41:24 Chain [2] PCB Version: 0x0100
2022-11-06 22:41:24 Chain [2] BOM Version: 0x0100
2022-11-06 22:41:28 Fan check passed.
2022-11-06 22:41:29 chain[0] PIC jump to app
2022-11-06 22:41:30 Check chain[0] PIC fw version=0x89
2022-11-06 22:41:32 chain[1] PIC jump to app
2022-11-06 22:41:33 Check chain[1] PIC fw version=0x89
2022-11-06 22:41:34 chain[2] PIC jump to app
2022-11-06 22:41:36 Check chain[2] PIC fw version=0x89
2022-11-06 22:41:36 create thread
2022-11-06 22:41:36 max sensor num = 4
2022-11-06 22:41:36 temperature_monitor_thread start...
2022-11-06 22:41:40 power type version: 0x0071
2022-11-06 22:41:40 Enter sleep to make sure power release finish.
2022-11-06 22:41:43 over max temp, pcb temp 127 (max 80), chip temp 142(max 95) pcb temp rise 0 chip temp rise 0, total_exit_failure 0
2022-11-06 22:41:43 ERROR_TEMP_TOO_HIGH: over max temp
2022-11-06 22:41:43 stop_mining: over max temp
2022-11-06 22:41:43 uninit_temp_info
2022-11-06 22:41:43 do not read temp anymore...
2022-11-06 22:41:43 cancel thread
2022-11-06 22:41:43 cancel thread
2022-11-06 22:41:43 ****power off hashboard****
2022-11-06 22:41:45 fan_etf: Set fixed fan speed=100
2022-11-06 22:41:45 temp monitor thread exit
2022-11-06 22:41:46 start to init...
2022-11-06 22:41:46 Version num 8
2022-11-06 22:41:46 Mask num 0xe000
2022-11-06 22:41:46 Note: addrInterval or corenum is not initialized.
2022-11-06 22:44:41 Slept 180 seconds, diff = 127.
2022-11-06 22:44:41 set_voltage_by_steps to 1500.
2022-11-06 22:44:46 start up min temp by 75a = 0
2022-11-06 22:44:46 set UART baud to 115200
2022-11-06 22:44:54 Chain[0]: find 0 asic, times 0
2022-11-06 22:45:02 Chain[0]: find 0 asic, times 1
2022-11-06 22:45:09 Chain[0]: find 0 asic, times 2
2022-11-06 22:45:10 Chain 0 only find 0 asic, will power off hash board 0
2022-11-06 22:45:17 Chain[1]: find 0 asic, times 0
2022-11-06 22:45:25 Chain[1]: find 0 asic, times 1
2022-11-06 22:45:33 Chain[1]: find 0 asic, times 2
2022-11-06 22:45:33 Chain 1 only find 0 asic, will power off hash board 1
2022-11-06 22:45:41 Chain[2]: find 0 asic, times 0
2022-11-06 22:45:48 Chain[2]: find 0 asic, times 1
2022-11-06 22:45:56 Chain[2]: find 0 asic, times 2
2022-11-06 22:45:56 Chain 2 only find 0 asic, will power off hash board 2
2022-11-06 22:45:57 ERROR_SOC_INIT: soc init failed!
2022-11-06 22:45:57 stop_mining: soc init failed!
2022-11-06 22:45:57 ****power off hashboard****
2022-11-06 22:45:58 STATUS_OKAY
2022-11-06 22:45:58 set_start_time_point total_tv_start_sys=297 total_tv_end_sys=298
Post
Topic
Board Hardware
Re: S19xx vs Avalon 1246 vs Whatsminer M30S/M31S
by
sushsdawg
on 01/02/2022, 16:28:45 UTC
So far not a fan of the Avalon 1246's.

The hash rate, irrespective of pool is much lowered compared to what it is supposed to do.  On my 85THs, it gets a max of 80, usually running lower.  The 83THS gets high 70's and close to 80.  1 machine keeps rebooting every 36-48 hours, and can't seem o find the issue.  Machines were new, and been mining only a few months.

The S19 110's have been performing well and above the advertised rate, and been sound since day 1.
Post
Topic
Board Pools
Re: [∞ YH] solo.ckpool.org 2% fee solo mining 263 blocks solved!
by
sushsdawg
on 27/01/2022, 15:04:19 UTC
Quote from: Sledge0001 on January 26, 2022, 07:30:48 PM
............
Now because I hit big should I give up now? Nah... I am still mining with ALL my USB Stick miners as you can see here: ....

Congratulations and freaking amazing.  Very happy for you, and gives us with a small allocation to solo mining some hope.
Post
Topic
Board Mining (Deutsch)
Re: Groupbuy Solo Mining - Blockparty 2022 Number 10
by
sushsdawg
on 24/01/2022, 13:41:28 UTC
Quote from: willi9974 on Today at 06:25:57 AM
Quote from: sushsdawg on Today at 03:07:02 AM
Hi Willi, can I be extended for 0.005 for runs 11-15
Yes no problem

Thank you Willi

+++++++++++++++++++++++++++++++++++++++
Groupbuy Wallet: 3KWE8HcunSfvfNBy3CdXZdQ2HyvierBxeT
Return Wallet: 3Q9NknvMipCYpJdQGykLMutT5Y2EajRqLD
Your stake: 0.025
Reservation: 11-15
Your TX: 5b5f4cd467ba7723338e5735de8b6bd9c5565dcc25e119693fa8608266d2dd0b
Voting comment:
+++++++++++++++++++++++++++++++++++++++
Post
Topic
Board Mining (Deutsch)
Re: Groupbuy Solo Mining - Blockparty 2022 Number 10
by
sushsdawg
on 24/01/2022, 03:07:02 UTC
Hi Willi, can I be extended for 0.005 for runs 11-15
Post
Topic
Board Hardware
Merits 2 from 1 user
Re: S19 fan spec?
by
sushsdawg
on 18/01/2022, 23:47:31 UTC
⭐ Merited by wndsnb (2)
Just wanted to report back on the duct fans.

I have few Avalons 1246's all on the same rack.  These machines are in the attic, in Texas, and today is a warm day, which I was waiting for to report back

On 1 machine I hooked up AC infinity's 10" Duct Fan and Filter box on the intake side and just the duct fan on the exhaust side.  Both fans at about 600 cfm (50% of their 1200CFM capability)

Comparing the identical machines side by side - the non ducted machines fans are running at about 70% (5200 RPM) , the ducted machine fan is running at 48%(3775 RPM).

Also the high pitch of the machine was silenced to low rumble.  With this POC done, will hook up 2 machines per duct fan and hopeful quieten my house more, while I plan to plan to sound proof the area more.
Post
Topic
Board Mining (Deutsch)
Re: Groupbuy Solo Mining - Blockparty 2022 Number 6
by
sushsdawg
on 15/01/2022, 19:11:38 UTC
Hi Willi - will the pool # 6 just keep running since most in this run are paid through #8 or #10, or would you start a new run?

Thanks.
Post
Topic
Board Mining (Deutsch)
Re: Groupbuy Solo Mining - Blockparty 2022 Number 6
by
sushsdawg
on 14/01/2022, 09:55:10 UTC
Quote from: willi9974 on Today at 09:47:10 AM
Quote from: sushsdawg on Today at 09:39:26 AM
Hi Willi,

Here is my deposit for the next few runs.

+++++++++++++++++++++++++++++++++++++++
Groupbuy Wallet: 3KWE8HcunSfvfNBy3CdXZdQ2HyvierBxeT
Return Wallet: 3Q9NknvMipCYpJdQGykLMutT5Y2EajRqLD
Your stake: 0.04
Reservation: 4x
Your TX: f394f6dcb0ed2906d0a993aa7311678fb42947e8aa462cec7b0086fed576dc86
Voting comment: 20
+++++++++++++++++++++++++++++++++++++++

Early morning here, and miscalculated. Wanted to send for 6-10, should have sent 0.05 for 5 runs.  Can I send another 0.01 in a separate transaction? Apologize for the mess up.

yes you can send a second TX no problem

Thank you.
TX: 2b0dee5eb80c116ebcb56377526c9cf837b9bf7ceb1f5360a98de7fe38135fdf

So that should square me up for run 6-10. Apologize to add more work for you.
Post
Topic
Board Mining (Deutsch)
Re: Groupbuy Solo Mining - Blockparty 2022 Number 6
by
sushsdawg
on 14/01/2022, 09:39:26 UTC
Hi Willi,

Here is my deposit for the next few runs.

+++++++++++++++++++++++++++++++++++++++
Groupbuy Wallet: 3KWE8HcunSfvfNBy3CdXZdQ2HyvierBxeT
Return Wallet: 3Q9NknvMipCYpJdQGykLMutT5Y2EajRqLD
Your stake: 0.04
Reservation: 4x
Your TX: f394f6dcb0ed2906d0a993aa7311678fb42947e8aa462cec7b0086fed576dc86
Voting comment: 20
+++++++++++++++++++++++++++++++++++++++

Early morning here, and miscalculated. Wanted to send for 6-10, should have sent 0.05 for 5 runs.  Can I send another 0.01 in a separate transaction? Apologize for the mess up.
Post
Topic
Board Hardware
Re: S19 fan spec?
by
sushsdawg
on 10/01/2022, 00:54:22 UTC
Will do, ordered the fans today.
Post
Topic
Board Hardware
Re: S19 fan spec?
by
sushsdawg
on 09/01/2022, 18:51:52 UTC
Quote from: wndsnb on Today at 04:46:34 PM
Just did a search for flexible duct specs and this was what came up (from Thermaflex), you may be able to find similar specs for the exact duct you're looking at with enough internet searching...

For a straight run of 10" duct at 1000cfm (which includes safety factor since the fans on the miner max out at 500cfm each at 0 static pressure), it looks like about 1"H2O per 100'. I assume you'll have some bends in there, so the drop would be higher. Maybe just give yourself a factor of 2 more safety factor. Or click on the image below to open the pdf where they go into depth about how to calculate equivalent lengths with bends.



This is awesome info - thank you..  For the bend, I can shorten that exhaust duct, just needed it pointed upwards towards the exhaust fan. I have a ~2500 cfm exhaust on the roof, may add another, enough ventilation, so not worried about the negative pressure.
Post
Topic
Board Hardware
Re: S19 fan spec?
by
sushsdawg
on 09/01/2022, 14:59:31 UTC
Quote from: wndsnb on Today at 01:28:02 PM
The specs I suggested would be if you are removing the original fans and replacing them with ducts and duct fan(s). If you are not removing the fans on the miner, then the specs are a lot lower since all you need to do is deliver the max airflow the miner will require and only overcome the static pressure of your ducts and filter.

The 10" AC infinity fan lists a static pressure spec of 1059 Pa, which is 108 mmH2O, so I'd guess it has a good chance of working if your ducts aren't too long.

Is there a calculation to see the static pressure, to see the max duct I can have. 
The plan is:
Intake Inside: AC Ininity 10" Air filter box --> ~ 2 ft Insulated 10" duct --> AC Infinity 10" Inline duct fan --> Reducer to 8" --> "Y" Split to 2 ducts( far each machine) --> ~ 8 ft Insulated 8" duct to the machine to attached 8" shroud

Exhaust side": ~2 ft Insulated 8" duct from machine --> Combine ducts with Y from another machine; will look preferably for 8" to 10 " --> ~ 2 ft 1nsulated 10" duct -->AC Infinity 10" Inline duct fan --> ~8 ft Insulated 10" duct possibly pointed upwards towards 2500CFM exhaust fan

Should I expand the duct from 10" to 12 " On the exhaust side, afte the duct fan, to minimize any  resistance

Do you forsee any static pressure issues / what is the longest duct you think I could use?
Planning to use this duct - https://www.homedepot.com/p/Master-Flow-16-in-x-25-ft-Insulated-Flexible-Duct-R6-Silver-Jacket-Pack-of-6-F6IFD16X300-6PK/313315084

Quote from: philipma1957 on Today at 02:10:25 PM

as an aside that fan has a speed control which will allow you to reduce speed if needed.

Duct size reduction = less air flow  so maybe you can just run the fan at full speed.

if the ducts are 20 feet long you may need a booster fan near the exit at the window.
Thank you. Yeah, I may just run the fans at max. I wish I knew how to calculate the max duct run I could use before needing another fan at the end
Post
Topic
Board Hardware
Re: S19 fan spec?
by
sushsdawg
on 09/01/2022, 04:00:27 UTC
Quote from: wndsnb on Today at 12:47:09 AM
2 fans are intake, 2 are output, so it would be more accurate to find a setup that moves 500cfm per miner with 0 static pressure, and 0cfm at 58 mmH2O. Or 500cfm per miner and 28 mmh20 if you are doing two duct fans, on one the intake, one on the output.

Also, you'll need an even higher static pressure spec depending on how long your ducts are.
Need to research this more I guess.  I was going to add 1x1200 cfm duct fan and split it to 2 machines on the intake side, and another 1200 cfm duct fan on the exhaust side for every 2 machines.  ducts were 8" and about  8ft long.  Input side was going to have a filter box capable of 1300 cfm

Duct fans were the AC Infinity 10" duct fans with a reducer to 8" ducts
Post
Topic
Board Hardware
Re: S19 fan spec?
by
sushsdawg
on 08/01/2022, 18:23:15 UTC
Quote from: NotFuzzyWarm on Today at 06:11:40 PM
Per fan.
Thank you.  So, I could technically split the a 1250 cfm fan across 2 ducts, i could reduce it to 1100 cfm and split it between 2 machines, giving each machine ~ 600cfm?

Same route for the exhaust side - read somewhere on this forum, I got to keep the cfm the same on each side?
Post
Topic
Board Hardware
Re: S19 fan spec?
by
sushsdawg
on 08/01/2022, 16:41:21 UTC
Quote from: NotFuzzyWarm on September 16, 2021, 02:50:03 PM
Speed is 6500 RPM delivering 250CFM, Maximum air pressure 29.0 mmH2O at zero air flow, 4-pin connector
Hi,  is that the total cfm per machine (s19 / Avalon 1246) or for each fan.  Trying to calculate how many duct fans I need per machine or can combine across per machine

Thank you.
Post
Topic
Board Mining (Deutsch)
Re: Groupbuy Solo Mining - Blockparty 2022 Number 2
by
sushsdawg
on 08/01/2022, 16:35:02 UTC
Hi Willi, could you add me to # 3 if there is space.
Post
Topic
Board Mining support
Re: Avalon 1246 acting strange HELP
by
sushsdawg
on 05/01/2022, 16:09:00 UTC
Thought I'll append to this as well my issue, if thats ok.

On Dec 31st my 1246 (85Th) was not hashing, PVT_T0,T1, T2 were reading -273.  It resolved it self after about 30 minutes.

Since then it has been rebooting every ~30 hours.  My other 1246's are running fine.  Machines are relatively new.  Its the May2021 batch, that I got into my hands in November. I can't seem to find the BootBy code either of 0x21. I've pasted my log below, can any of the experts give me an idea what may be going on? Really appreciate it

Dec 31
Code:
{'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':1,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':105,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':0,'Stale':0,'Get Failures':0,'Local Work':0,'Remote Failures':0,'Network Blocks':0,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':1,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':0.000000,'MM ID0':'Ver[1246-85-21042001_4ec6bb0_61407fa] DNA[020100006d4c9982] MEMFREE[1696184.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Idle, Hash Board: 3 ] Elapsed[177] BOOTBY[0x01.00000000] LW[0] MH[0 0 0] HW[0] DH[0.000%] Temp[-273] TMax[-273] TAvg[-273] Fan1[0] Fan2[0] Fan3[0] Fan4[0] FanR[0%] Vo[0] PS[0 0 0 0 0 0] PLL0[0 0 0 0] PLL1[0 0 0 0] PLL2[0 0 0 0] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[-273 -273 -273] MTavg[0 0 0] TA[0] Core[A3201] PING[0] POWS[0] HASHS[0 0 0] POOLS[1] SoftOFF[1] ECHU[0 0 0] ECMM[0] SF0[480 500 520 540] SF1[480 500 520 540] SF2[480 500 520 540] PVT_T0[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T1[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T2[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[0 0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-freq 384:404:424:444 --avalon10-voltage-level 33 ] ATAOPTS1[--avalon10-freq 480:500:520:540 --avalon10-voltage-level 40 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[480 500 520 540] ATABD1[480 500 520 540] ATABD2[480 500 520 540] WORKMODE[1]','MM Count':0,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}

Jan 3rd
Code:
Failures':0,'Local Work':91194,'Remote Failures':0,'Network Blocks':4,'Total MH':198897251940.0000,'Work Utility':1121197.28,'Difficulty Accepted':46863744.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':57336339,'Device Hardware%':0.0008,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':2479,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1246-85-21042001_4ec6bb0_61407fa] DNA[020100006d4c9982] MEMFREE[1208184.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[2484] BOOTBY[0x21.00000000] LW[2436949] MH[102 134 135] HW[371] DH[3.095%] Temp[26] TMax[80] TAvg[65] Fan1[3611] Fan2[3590] Fan3[3646] Fan4[3651] FanR[46%] Vo[314] PS[0 1207 1258 254 3195 1256] PLL0[3288 2055 3141 5436] PLL1[2460 3116 4721 3623] PLL2[3140 3625 4235 2920] GHSspd[82863.14] DHspd[3.095%] GHSmm[86225.44] GHSavg[80064.07] WU[1118482.18] Freq[516.20] Led[0] MGHS[26692.75 26947.67 26423.66] MTmax[80 76 73] MTavg[68 64 62] TA[360] Core[A3201] PING[56] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[0 0 0] ECMM[0] SF0[480 500 520 540] SF1[480 500 520 540] SF2[480 500 520 540] PVT_T0[ 74 73 74 79 76 74 72 77 76 76 76 72 72 75 77 78 74 74 72 79 77 79 74 70 70 75 79 77 76 72 70 73 79 80 72 69 67 71 79 75 73 66 66 66 74 73 68 63 61 67 73 69 64 63 62 60 66 65 63 61 60 58 55 58 58 58 63 59 59 61 63 64 62 62 62 60 63 63 65 63 61 62 65 65 67 64 63 63 68 68 69 66 64 66 66 69 69 67 65 65 66 70 69 69 65 66 69 70 73 69 63 67 67 73 72 70 67 66 69 73] PVT_T1[ 64 65 64 65 70 64 63 69 67 70 69 64 63 67 69 69 69 62 65 67 71 75 69 66 64 69 72 76 70 66 66 68 75 74 67 68 68 70 74 74 70 67 65 69 70 69 66 67 64 67 70 68 66 62 64 63 65 64 63 60 58 56 57 59 59 60 59 60 61 59 60 61 63 60 62 61 63 64 63 62 64 64 61 64 64 63 62 65 64 64 64 63 65 64 64 64 63 64 63 63 64 63 62 61 62 64 64 62 61 64 62 61 64 62 62 64 62 60 63 64] PVT_T2[ 62 65 66 66 67 64 63 66 67 67 65 65 65 68 70 70 64 62 65 68 72 72 66 63 61 66 73 70 67 61 62 66 71 72 64 63 61 67 72 73 69 64 62 64 68 65 65 60 60 62 65 63 61 59 57 60 61 59 58 56 55 54 54 56 56 57 56 56 59 61 59 59 59 59 59 61 61 62 60 60 59 59 59 61 59 63 59 61 61 60 63 62 61 61 61 60 61 61 61 65 63 61 59 62 64 64 60 59 58 61 64 62 63 62 64 63 62 60 64 64] PVT_V0[286 293 293 292 285 288 292 287 286 283 287 290 277 282 284 277 279 279 284 279 280 281 279 277 282 284 280 285 283 285 278 279 279 282 282 286 282 285 282 285 287 288 290 290 292 287 290 291 296 292 294 293 291 288 293 295 293 295 300 306 305 300 299 297 301 302 296 299 297 295 298 298 299 300 302 295 291 293 287 288 288 298 297 294 291 293 292 291 289 289 286 286 285 290 286 289 292 295 292 290 283 282 282 285 286 295 292 295 285 288 293 289 292 292 287 289 292 280 284 288] PVT_V1[287 291 295 296 292 291 294 294 285 292 291 289 286 286 289 291 292 293 291 294 299 280 283 288 288 288 283 287 287 291 279 279 285 277 283 278 283 285 282 293 288 290 290 291 291 290 293 292 292 295 294 295 295 299 290 295 293 286 291 295 292 291 291 288 291 295 302 300 301 295 297 293 294 292 289 286 285 286 288 287 291 291 292 294 285 292 295 288 294 298 293 297 292 292 284 287 290 286 289 294 297 293 293 294 298 294 290 296 295 294 293 294 290 293 286 290 287 291 293 296] PVT_V2[286 288 291 303 299 295 289 290 288 294 292 295 286 283 286 292 294 291 283 284 281 285 279 283 288 290 285 275 283 285 274 278 286 284 288 292 287 283 285 282 280 284 287 290 285 281 286 292 286 289 299 291 290 293 283 283 292 295 302 304 305 302 299 300 301 299 294 296 294 295 294 295 293 292 293 290 292 289 296 299 298 299 303 303 282 287 293 295 297 297 295 298 298 295 296 293 303 298 298 283 282 277 289 290 291 287 282 283 289 290 287 292 296 298 297 299 303 295 294 298] MW[817244 817081 817158] MW0[143 135 148 125 115 124 132 137 126 127 129 114 117 101 132 84 119 116 142 108 137 131 144 109 126 128 104 105 117 116 101 114 103 143 66 123 125 132 112 136 124 126 136 122 131 143 123 128 138 137 128 135 122 118 132 120 127 140 153 125 134 130 128 152 121 167 132 141 138 120 142 127 121 135 165 133 153 122 129 128 94 127 119 132 93 110 130 126 125 136 117 123 106 126 140 115 132 140 123 112 114 111 119 123 115 124 145 129 124 111 134 132 126 116 140 110 128 119 124 138] MW1[118 147 142 165 121 120 133 139 131 126 145 118 121 132 122 142 124 131 108 123 126 109 135 110 104 136 133 142 133 126 141 124 123 123 92 133 104 110 122 119 127 128 128 126 140 149 126 106 113 133 102 137 141 127 124 131 141 127 111 135 125 135 116 120 115 99 137 119 149 118 105 131 108 143 135 134 110 125 110 130 117 140 121 125 115 131 146 138 126 141 105 145 138 137 122 116 131 113 131 160 128 126 145 128 138 109 132 108 128 134 117 115 128 111 117 137 131 147 146 133] MW2[119 125 144 113 146 131 141 144 106 125 148 118 121 109 126 141 122 132 136 116 123 119 123 121 110 117 118 120 124 133 122 127 110 129 114 126 100 111 103 102 115 111 119 132 137 108 114 127 125 123 117 100 145 118 119 119 125 115 137 129 129 121 129 116 139 121 123 116 138 115 126 121 160 133 125 138 116 144 130 125 115 129 132 136 126 136 134 115 103 135 132 130 115 116 132 122 122 119 126 126 141 121 138 105 123 125 119 115 126 132 128 123 132 132 120 118 123 130 148 112] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-freq 384:404:424:444 --avalon10-voltage-level 33 ] ATAOPTS1[--avalon10-freq 480:500:520:540 --avalon10-voltage-level 39 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[480 500 520 540] ATABD1[480 500 520 540] ATABD2[480 500 520 540] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}

Jan 5th
Code:
{'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':30660,'MHS av':82077793.89,'MHS 30s':81087002.58,'MHS 1m':80166461.78,'MHS 5m':81765802.04,'MHS 15m':82233066.01,'Found Blocks':0,'Getworks':581,'Accepted':7842,'Rejected':4,'Hardware Errors':4376,'Utility':15.35,'Discarded':81136019,'Stale':0,'Get Failures':0,'Local Work':1153425,'Remote Failures':0,'Network Blocks':51,'Total MH':2515701715422.0000,'Work Utility':1146871.05,'Difficulty Accepted':593688268.00000000,'Difficulty Rejected':310932.00000000,'Difficulty Stale':0.00000000,'Best Share':1834098039,'Device Hardware%':0.0007,'Device Rejected%':0.0531,'Pool Rejected%':0.0523,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':30661,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1246-85-21042001_4ec6bb0_61407fa] DNA[020100006d4c9982] MEMFREE[1206944.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[30665] BOOTBY[0x21.00000000] LW[30622383] MH[990 1819 1567] HW[4376] DH[3.063%] Temp[24] TMax[80] TAvg[65] Fan1[3410] Fan2[3417] Fan3[3401] Fan4[3390] FanR[43%] Vo[314] PS[0 1208 1258 255 3207 1256] PLL0[3356 2097 3016 5451] PLL1[2315 2786 4772 4047] PLL2[3034 3364 4304 3218] GHSspd[82963.19] DHspd[3.063%] GHSmm[85830.16] GHSavg[82079.55] WU[1146638.06] Freq[513.83] Led[0] MGHS[27424.05 27471.52 27184.12] MTmax[80 77 74] MTavg[68 65 63] TA[360] Core[A3201] PING[49] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[0 0 0] ECMM[0] SF0[480 500 520 540] SF1[480 500 520 540] SF2[480 500 520 540] PVT_T0[ 74 73 75 79 76 75 72 77 77 77 76 73 72 76 77 78 74 74 72 79 77 78 74 71 70 75 79 77 77 72 70 73 79 80 73 70 68 71 79 75 74 67 66 66 74 72 68 64 61 66 72 69 65 63 62 60 65 63 63 61 60 57 55 56 58 58 63 59 58 60 62 64 62 61 60 60 62 63 65 63 60 61 65 66 67 64 62 63 68 69 69 66 63 66 66 69 69 67 65 65 66 71 69 70 65 66 69 71 73 69 63 66 67 73 73 70 67 66 69 72] PVT_T1[ 64 66 65 66 71 65 64 69 68 70 70 65 64 68 70 69 70 63 67 68 72 76 70 67 66 70 73 77 71 67 67 69 76 75 69 69 69 71 76 75 72 68 67 69 71 70 67 68 64 68 71 69 67 63 65 63 66 65 64 61 59 57 58 60 60 61 60 61 62 59 60 62 63 61 62 62 64 64 64 63 64 64 62 65 65 64 63 65 64 64 65 64 66 65 65 64 64 65 64 63 64 64 63 62 62 65 64 63 62 65 63 61 65 63 63 65 63 61 64 64] PVT_T2[ 63 65 66 66 67 65 64 67 67 67 65 65 65 69 71 71 64 63 66 68 72 73 66 64 62 67 73 70 68 62 63 67 72 72 65 64 62 68 72 74 70 64 62 64 69 65 65 60 61 63 65 63 62 60 57 61 61 60 58 56 55 55 54 56 56 58 56 57 59 62 59 60 59 59 59 61 61 62 61 61 59 59 59 62 59 63 59 61 61 60 64 62 61 62 61 61 62 61 61 65 64 62 60 62 65 64 61 59 59 62 64 62 64 62 64 64 63 60 65 64] PVT_V0[286 293 292 292 286 288 292 287 286 284 287 290 277 282 285 276 278 279 283 279 279 281 279 277 282 283 279 285 283 285 277 278 279 282 282 285 282 285 282 285 286 287 289 290 291 287 290 291 296 293 294 293 291 287 294 296 294 295 300 306 305 300 299 297 301 302 297 300 298 296 299 299 300 301 303 295 291 293 286 287 289 298 297 294 290 293 292 292 289 289 285 285 283 290 285 288 292 295 292 290 284 282 282 285 287 294 292 294 284 287 294 290 293 293 287 289 292 280 284 289] PVT_V1[287 292 295 297 292 291 294 294 286 292 290 287 285 286 289 291 292 293 292 294 298 279 282 287 289 287 283 287 287 291 278 279 285 276 283 278 283 284 281 293 287 289 290 291 290 290 293 292 292 295 294 295 294 299 290 295 293 286 291 296 293 291 291 287 291 294 303 301 301 295 296 292 294 291 289 286 285 285 288 287 290 291 292 293 285 292 295 287 293 297 293 296 292 292 285 288 289 286 289 294 297 293 293 293 298 293 289 295 295 294 294 294 290 293 287 291 287 292 293 296] PVT_V2[286 288 290 302 299 294 289 290 288 294 292 294 285 283 286 292 293 290 283 283 281 283 279 284 288 289 284 275 282 283 274 278 286 283 287 291 286 283 285 282 280 283 287 290 285 282 287 292 286 289 299 291 290 294 284 285 291 295 302 305 305 302 299 300 302 300 295 296 294 295 295 295 293 292 294 290 293 289 295 298 299 299 304 302 283 287 293 294 297 298 296 298 298 295 296 292 303 298 298 283 282 276 289 290 291 287 283 283 289 290 287 292 296 298 297 299 303 295 294 298] MW[10209386 10209436 10209488] MW0[1657 1601 1786 1741 1611 1656 1633 1637 1626 1454 1702 1616 1495 1527 1618 1143 1436 1603 1449 1301 1501 1433 1685 1298 1583 1611 1387 1539 1295 1517 1571 1520 1517 1664 893 1623 1579 1549 1278 1602 1637 1582 1563 1721 1665 1673 1575 1562 1628 1812 1819 1640 1561 1531 1702 1597 1698 1650 1659 1795 1689 1704 1700 1715 1702 1726 1700 1589 1741 1659 1727 1663 1682 1736 1692 1596 1590 1562 1644 1654 1310 1663 1687 1517 1389 1591 1732 1600 1601 1651 1524 1581 1466 1565 1808 1729 1683 1594 1609 1525 1471 1591 1494 1598 1596 1572 1748 1602 1668 1688 1535 1515 1581 1735 1730 1530 1541 1545 1482 1695] MW1[1532 1665 1644 1703 1660 1491 1702 1628 1537 1569 1666 1649 1553 1713 1513 1608 1741 1587 1613 1653 1693 1536 1680 1406 1412 1483 1650 1609 1614 1488 1514 1562 1523 1467 1137 1677 1371 1603 1544 1598 1660 1471 1672 1552 1704 1639 1637 1525 1569 1683 1683 1581 1699 1589 1606 1620 1641 1622 1382 1738 1582 1617 1527 1549 1671 1493 1635 1680 1746 1678 1603 1710 1448 1600 1601 1486 1511 1644 1596 1724 1466 1633 1672 1620 1693 1478 1724 1724 1600 1489 1633 1576 1541 1662 1505 1372 1522 1672 1638 1676 1608 1670 1543 1581 1590 1492 1672 1592 1599 1727 1557 1670 1565 1593 1539 1516 1744 1621 1704 1706] MW2[1471 1606 1613 1742 1725 1697 1588 1620 1584 1637 1672 1608 1611 1477 1594 1630 1504 1452 1538 1604 1422 1611 1382 1512 1469 1556 1636 1558 1502 1454 1426 1660 1594 1632 1570 1489 1074 1551 1584 1546 1643 1366 1519 1550 1545 1369 1601 1446 1596 1567 1597 1431 1557 1504 1557 1753 1638 1466 1619 1697 1613 1603 1571 1542 1581 1632 1504 1498 1669 1539 1698 1673 1690 1506 1656 1435 1547 1789 1787 1680 1497 1631 1698 1701 1455 1610 1551 1576 1606 1568 1592 1662 1619 1463 1622 1594 1592 1550 1588 1583 1538 1606 1485 1638 1614 1621 1494 1593 1571 1625 1607 1707 1628 1539 1648 1674 1696 1631 1723 1718] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-freq 384:404:424:444 --avalon10-voltage-level 33 ] ATAOPTS1[--avalon10-freq 480:500:520:540 --avalon10-voltage-level 40 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[480 500 520 540] ATABD1[480 500 520 540] ATABD2[480 500 520 540] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}