Search content
Sort by
Showing 19 of 19 results by zigminer
@zigminer
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
next version will slove this bug.
@zigminer
Please dont make or sell more of zig z1 machine the difficulty of has gone too high and can't withstand more the profit has decreased significantly i assumed u are scam i hope im wrong
Please dont make or sell more of zig z1 machine the difficulty of has gone too high and can't withstand more the profit has decreased significantly i assumed u are scam i hope im wrong
Are you still not sure?
Certainly ZigMiner is a big scammer and is now not even responding to us.
This is the biggest scam in the history of crypto currencies, and its defamation will forever be for Zigminer
:: ZigMiner has been damaging to its customers by selling a lot of devices
:: The company's very weak support is unhappy with all customers
:: The supplied devices have many problems, and software support is very weak
:: No tips for hardware issues
:: And many other problems ...
The ZigMiner Company has proved with this device that it will never be reliable, I and other customers of company will never again rejoice at this , and we will never forget our big losses.
@zigminer
We have already discontinued z1+, and if we are a liar, we don't have to continue to update the firmware. Most of the repair machines we have received so far because the firmware has been modified, and some fake z1+.
Received my miner on Monday. (Thank god!, ordered from dayunmining.com and was worried it was a scam as I didn't research before I bought)
However I am not getting the advertised profit, asicminervalue stated that it would be getting $60USD per day, yet currently I am barely getting half of that. Can anyone help me? I have updated it to the latest firmware.
However I am not getting the advertised profit, asicminervalue stated that it would be getting $60USD per day, yet currently I am barely getting half of that. Can anyone help me? I have updated it to the latest firmware.
I am 99.9% sure this is a fake site. I stupidly decided to buy my first ever miner after getting interested in mining.
$1250 paid and haven't heard anything since :-( Great introduction to mining lol. Absolutely gutted! had I seen what it was selling for at other places I would never have bought it. I have emailed them but I am fairly sure I wont hear back... So a warning to others... AVOID dayunmining.com If by some miracle I do get the miner I will post back with an update.
I have said many times that we have no contact with Dayun.
Even after we stopped production, he was still selling air.
BTW
The difficulty grows because of the HDAC change algorithm 2018/10.
@zigminer, i want to run 3009 firmware but why is it sooooo buggy? it works like 15-20 hours good and suddenly out of the blue a hashboard doesnt work anymore, yellow red asics, or a half hashboard is black. Sometimes you have to restart 5 times or more... BUT it is the only firmware that hashes 6.5 ghz for my z1 instead of 6... I am not awake 24/24 to monitor this.... i loose more money on the not or half working miner if this happens over night then install a new firmware that is less or more a bit stable. at least for a day ... Why is there only 1 firmware that hashes more ? Why is it soooooo buggy?
Try to replace your power supply
Many agents privately send some poorly performing power supplies.
We also found instability after our own tests.
This is normal, and is not the responsibility of the manufacturer to resolve. You purchased this device with the understanding that it was not exclusive to you and that network hashrate increasing means profit decreasing. If you were not aware of this, then that is your own fault. The situation is the same and always has been the same, since the earliest days of mining - additional miners will share the profits, they do not create extra profits out of thin air.
At the beginning of the first batch (2018/08) , our sales price did not exceed $4350. Dayun as our agent added too much money. I am sorry to be late for our website.
dayun's reseller websites sold it around 4500 ~4850 usd. dayun just make profit 10 percent. i asked you: is this machine worth 4350 usd.how much profit do you make. we paid alot. most of us paid around 5500 ~6000 usd.roi is around 600 days. think about it. now is here most of zig1 owners sell their machines just 2000 usd.
As far as I know, the first batch of Z1, dayun is priced at more than $7,500.
We produce a small amount, but we invest as much as Bitmain, our unit cost is high.
This is normal, and is not the responsibility of the manufacturer to resolve. You purchased this device with the understanding that it was not exclusive to you and that network hashrate increasing means profit decreasing. If you were not aware of this, then that is your own fault. The situation is the same and always has been the same, since the earliest days of mining - additional miners will share the profits, they do not create extra profits out of thin air.
At the beginning of the first batch (2018/08) , our sales price did not exceed $4350. Dayun as our agent added too much money. I am sorry to be late for our website.
I don't know which website you are using, but Zig Z1 and Z1+ are still above A9 ZMaster
https://www.asicminervalue.com/miners/innosilicon/a9-zmaster
https://www.asicminervalue.com/miners/dayun/zig-z1-1
Today it's about 6-7 USD!!!
https://www.asicminervalue.com/
next version will add each hashboard hashrate monitor for autorestart
HELLO ZIGMINER,
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
for "Auto-Restart", what threshold do you recommend to use for the miner to "Auto-Restart" ?
Currently I have it set at 5Ghs to trigger Auto-Restart but it seems not effective sometimes.
Thanks
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
<>
How do i know that? Very easy...
<>
about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
New Firmware 20181116 - Overclocking bye bye
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalk.org/index.php?topic=5038441.msg46842719#msg46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
How do i know that? Very easy...
I made a lot of tests about OC
You can check it here: https://bitcointalk.org/index.php?topic=5038441.msg46842719#msg46842719
Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.
----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.
----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.
----------------------------------------------
So we are back to square one with the performance of the miner...
Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.
Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.
You are talking about the fact that I can increase the clock speed to 1000. That's right, but if you see it, it's at 950 
So we can overclock him up to 1000 but we didn't do it.
Ori, As you check all the machines from my laptop and took the screenshots you didn't saw any machine was overclocked to 1000
Beyond that you have it yourself on the google drive an image of 900_stable.
https://drive.google.com/drive/folders/1Z5vPZfQCwFsvYJwzzQ2kK_GUIMCA-YxS
Before you talk to me make sure you remove the overclock_900. Of those 50, I did not see Z1 get broken by overclock to 950!
https://imgur.com/a/qkyDzDk
Apart from that, Me and my colleagues have taken all care of what you all have not done: deliver a good software to a Dayun!
After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79
So we can overclock him up to 1000 but we didn't do it.
Ori, As you check all the machines from my laptop and took the screenshots you didn't saw any machine was overclocked to 1000
Beyond that you have it yourself on the google drive an image of 900_stable.
https://drive.google.com/drive/folders/1Z5vPZfQCwFsvYJwzzQ2kK_GUIMCA-YxS
Before you talk to me make sure you remove the overclock_900. Of those 50, I did not see Z1 get broken by overclock to 950!
https://imgur.com/a/qkyDzDk
Apart from that, Me and my colleagues have taken all care of what you all have not done: deliver a good software to a Dayun!
Dear Zigminer,
You posted screenshots you secretly took during a teamviewer session.
Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.
In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.
Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.
Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.
In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.
I hope you will enable SSH again, so we can use the newest firmware you provide.
I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.
https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2
You posted screenshots you secretly took during a teamviewer session.
Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.
In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.
Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.
Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.
In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.
I hope you will enable SSH again, so we can use the newest firmware you provide.
@zigminer,
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.
https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2
After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79
We are not dayun！
The stable frequency of z1 is 900Mhz
The stable frequency of z1+ is 925Mhz
Dear Zigminer,
You posted screenshots you secretly took during a teamviewer session.
Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.
In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.
Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.
Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.
In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.
I hope you will enable SSH again, so we can use the newest firmware you provide.
I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.
https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2
You posted screenshots you secretly took during a teamviewer session.
Let me explain why we made modifications to you firmware.
We are a hosting company, hosting a lot of ASIC-Miners.
In order to host more than 1 Miner, we need the miners to have different IP addresses.
This already is the first shortcoming of the Zigminer Firmware.
Every miner will use the same static IP chosen by you. Even after changing it in the webinterface of the miner to DHCP it keeps the same IP.
That is why we began to modify the firmware, so that we can actually use the miners.
We hardcoded the firmware to DHCP.
Then we realized that the method you use to set up a MAC adress was also messy and didnt work well. There even is a firmware version you provide with fixed MAC address. Not very handy.
In the screenshot you provided you can see that our company name was added to the webinterface (https://www.mininghosting.eu). That doesn't change functionaltiy. But it was a good indicator for us and for our clients that the miner is running a repaired version of your firmware.
To disable SSH and therefore remove important monitoring options again makes the zigminer less and less attractive to use.
Compared to other ASICs the Z1 is very unstable, therefore monitoring is key.
I hope you will enable SSH again, so we can use the newest firmware you provide.
@zigminer,
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.
https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2
After the firmware is modified, the frequency can be set to 1000mhz, many user hash boards are burned. For such users, how do we carry out after-sales maintenance?
check this image , freq max 1000mhz
https://imgur.com/a/1x7dr79
@zigminer,
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I have 40 zig z1 miners.
In some cases I have the problem that I can reach them but when I log in via ssh I can see via command "top" that the miner the process FPGA_Download is active. When this process is activated, the miner can not start mining.
I searched a lot on the internet for this problem but could not find anything about it that you could find it.
Yesterday I tried the new firmware 1105, this firmware is indeed a bit faster but the layout is the same. Is OK. What I also find very sorry about this version is that they have shielded the SSH and have also created an encrypted partition in the image.
Why is SSH so important to me:
I can then manage and control all miners in my software, like reboot and read out the values, such as hashrate. Because they have a lot of problems with.
The built-in function of the miner does not always work well. That is why I made a script and applied it in the previous Firmware versions so that if the miner stays below the average hashrate within 60 minutes, the miner must restart.
I cannot do that now with the new Firmware 1105. I would like more information about this so I also have access to SSH at Firmware 1105.
I closed the SSH because some vendors had changed their procedures privately, causing mine operations to be unstable.
https://imgur.com/a/Lo7McuV
https://imgur.com/a/1x7dr79
https://imgur.com/a/wNUfjv2
i think you need set freq to 800mhz and try mining
65 degrees Celsius is usually a relatively high temperature, there may be a higher hw error, I may release a firmware version of the adjustable fan speed, but I do not recommend that the user adjust to the lowest position, high temperature will quickly damage the power board. Regarding fan detection, the next version will be added to fan speed check
And why is the FAN OUT showing 0 RPM and the miner stops working even if the fan is still running?
If the fan fails to detect the speed, it is decided to be a fan fault.
And why can't we disable the FAN CHECK so that we can continue mining?
Fan failure, high temperature will damage hashboard
And why don't you release a firmware where we can disable the FAN CHECK?
Next version, we are considering adding this feature.
And why is the hashrate to low and so unstable?
Try to reduce frequency. Some businesses have modified the firmware of Z1, counterfeiting z1+.
And why can't we find/buy hashboards?
We are trying to improve the official website pages as far as possible, and will sell spare parts later.
And why is there so much junk in the firmware?
specific?
If the fan fails to detect the speed, it is decided to be a fan fault.
And why can't we disable the FAN CHECK so that we can continue mining?
Fan failure, high temperature will damage hashboard
And why don't you release a firmware where we can disable the FAN CHECK?
Next version, we are considering adding this feature.
And why is the hashrate to low and so unstable?
Try to reduce frequency. Some businesses have modified the firmware of Z1, counterfeiting z1+.
And why can't we find/buy hashboards?
We are trying to improve the official website pages as far as possible, and will sell spare parts later.
And why is there so much junk in the firmware?
specific?
I am the founder of zigminer, dayun is just one of our sellers (Z1), and now has no contact with zigminer.
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com
office web : https://www.zigminer.com
office firmware download : https://download.zigminer.com