Quote from: Nap0nTilt on January 20, 2018, 12:41:04 PM

Quote from: RaptaGzus on January 20, 2018, 05:10:45 AM

For anyone who needs help on getting setup, this is a good guide: http://labbinarymining.com/how_to_pinkstarcoin.html
Or there's a video guide here: http://labbinarymining.com/gettingstarted.html

I have an R9 290 mining at 670H/s which is considered a High Hash Rate, so use port 7777 if you're getting something similar.

I have an average off 200-400h/s (depends a bit on what I'm doing on the computer Cheesy

)
Currently I am using low level port.
Do you think I should switch? Also what would be different if I would use a high power port?

You can check you exact H/s if you press the 'H' key on your motherboard whilst you have the XMR miner running, the website isn't accurate. It should look like this: https://i.imgur.com/SnGZwka.png
But at 400H/s I suspect you should be on the medium (5555) port. You can ask them directly http://labbinarymining.com/contact.html I did on discord, and they told me to set it to High.

No idea about what the difference between the ports is though.

RaptaGzus

Posts

Merits