stupid as i am i did the firmware upgrade and this is all that happens now.

PS: its been like this for hours, ive done a few reboots too, and factory reset etc.

http://i63.tinypic.com/2ez1vh1.png

Code:

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.10.31-ltsi-00003-gcf03eb9 (lzq@armdev01) (gcc version 4.7.3 20121106 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2012.11-20121123 - Linaro GCC 2012.11) ) #81 SMP Mon Apr 25 11:20:36 CST 2016
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Altera SOCFPGA, model: Altera SOCFPGA Cyclone V
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 258048
free_area_init_node: node 0, pgdat 806e5cc0, node_mem_map 8072a000
  Normal zone: 2016 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 258048 pages, LIFO batch:31
PERCPU: Embedded 8 pages/cpu @80f17000 s11200 r8192 d13376 u32768
pcpu-alloc: s11200 r8192 d13376 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256032
Kernel command line: mem=1008M console=ttyS0,115200 root=/dev/mtdblock3 rw rootfstype=jffs2
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1008MB = 1008MB total
Memory: 1015844k/1015844k available, 16348k reserved, 0K highmem
Virtual kernel memory layout:
   vector : 0xffff0000 - 0xffff1000 ( 4 kB)
   fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
   vmalloc : 0xbf800000 - 0xff000000 (1016 MB)
   lowmem : 0x80000000 - 0xbf000000 (1008 MB)
   modules : 0x7f000000 - 0x80000000 ( 16 MB)
   .text : 0x80008000 - 0x8065a930 (6475 kB)
   .init : 0x8065b000 - 0x806adbc0 ( 331 kB)
   .data : 0x806ae000 - 0x806e9990 ( 239 kB)
   .bss : 0x806e9990 - 0x80729384 ( 255 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
Console: colour dummy device 80x30
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
ftrace: allocating 17687 entries in 52 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x804ab220 - 0x804ab278
CPU1: failed to come online
Brought up 1 CPUs
SMP: Total of 1 processors activated (1196.85 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
NET: Registered protocol family 16
fpga bridge driver
DMA: preallocated 256 KiB pool for atomic coherent allocations
L310 cache controller enabled
l2x0: 8 ways, CACHE_ID 0x410030c9, AUX_CTRL 0x32460000, Cache size: 524288 B
syscon fffef000.l2-cache: regmap [mem 0xfffef000-0xfffeffff] registered
syscon ffd05000.rstmgr: regmap [mem 0xffd05000-0xffd05fff] registered
syscon ffc25000.sdrctl: regmap [mem 0xffc25000-0xffc25fff] registered
syscon ff800000.l3regs: regmap [mem 0xff800000-0xff800fff] registered
syscon ffd08000.sysmgr: regmap [mem 0xffd08000-0xffd0bfff] registered
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
altera_hps2fpga_bridge fpgabridge.2: fpga bridge [hps2fpga] registered as device hps2fpga
altera_hps2fpga_bridge fpgabridge.2: init-val not specified
altera_hps2fpga_bridge fpgabridge.3: fpga bridge [lshps2fpga] registered as device lwhps2fpga
altera_hps2fpga_bridge fpgabridge.3: init-val not specified
altera_hps2fpga_bridge fpgabridge.4: fpga bridge [fpga2hps] registered as device fpga2hps
altera_hps2fpga_bridge fpgabridge.4: init-val not specified
bio: create slab at 0
FPGA Mangager framework driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Switching to clocksource timer0
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
arm-pmu arm-pmu: PMU:CTI successfully enabled for 1 cores
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1984
io scheduler noop registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 194) is a 16550A
console [ttyS0] enabled
altera_fpga_manager ff706000.fpgamgr: fpga manager [Altera FPGA Manager] registered as minor 0
brd: module loaded
denali-nand-dt ff900000.nand: Dump timing register values:acc_clks: 4, re_2_we: 20, re_2_re: 20
we_2_re: 12, addr_2_data: 14, rdwr_en_lo_cnt: 2
rdwr_en_hi_cnt: 2, cs_setup_cnt: 2
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
5 ofpart partitions found on MTD device denali-nand
Creating 5 MTD partitions on "denali-nand":
0x000000000000-0x000001000000 : "NAND Flash Boot Area 16MB"
0x000001000000-0x000002000000 : "NAND Flash Boot Area backup1 16MB"
0x000002000000-0x000003000000 : "NAND Flash Boot Area backup2 16MB"
0x000003000000-0x00000b000000 : "NAND Flash jffs2 Root Filesystem 128MB"
0x00000b000000-0x000010000000 : "NAND Flash jffs2 Root Filesystem 80MB"
dw_spi_mmio fff00000.spi: master is unqueued, this is deprecated
CAN device driver interface
c_can_platform ffc00000.d_can: invalid resource
c_can_platform ffc00000.d_can: control memory is not used for raminit
c_can_platform ffc00000.d_can: c_can_platform device registered (regs=bf8dc000, irq=163)
stmmac_hw_init: 1000M
stmmac - user ID: 0x10, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
eth0: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Synopsys Designware Multimedia Card Interface Driver
dwmmc_socfpga ff704000.dwmmc0: couldn't determine pwr-en, assuming pwr-en = 0
dwmmc_socfpga ff704000.dwmmc0: Using internal DMA controller.
dwmmc_socfpga ff704000.dwmmc0: Version ID is 240a
dwmmc_socfpga ff704000.dwmmc0: DW MMC controller at irq 171, 32 bit host data width, 1024 deep fifo
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
dwmmc_socfpga ff704000.dwmmc0: 1 slots initialized
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using arm/armv7-ca9
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
jffs2: Empty flash at 0x01397ea4 ends at 0x01398000
VFS: Mounted root (jffs2 filesystem) on device 31:3.
devtmpfs: mounted
Freeing unused kernel memory: 328K (8065b000 - 806ad000)
eth0: device MAC address 56:d9:6b:09:dc:23
init phy ok
PHY DMA init OK
eth0: device MAC address 00:1d:6c:ed:31:bf
init phy ok
PHY DMA init OK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
libphy: stmmac-0:00 - Link is Up - 100/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
Original value in RESET_MANAGER_BASE_ADDR + BRGMODRST_ADDR is 0x0
request_mem_region OK!
AXI fpga dev virtual address is 0xbf942000
*base_vir_addr = 0xc504
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xc0000000
eth0: device MAC address 00:1d:6c:ed:31:bf
init phy ok
PHY DMA init OK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: device MAC address 00:1d:6c:ed:31:bf
init phy ok
PHY DMA init OK
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
libphy: stmmac-0:00 - Link is Up - 100/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
prepare send works thread on chain[0]
prepare send works thread on chain[1]
prepare send works thread on chain[2]
prepare send works thread on chain[3]
prepare send works thread on chain[4]
prepare send works thread on chain[5]
prepare send works thread on chain[6]
prepare send works thread on chain[7]
prepare send works thread on chain[8]
prepare send works thread on chain[9]
prepare send works thread on chain[10]
prepare send works thread on chain[11]
prepare send works thread on chain[12]
prepare send works thread on chain[13]
prepare send works thread on chain[14]
prepare send works thread on chain[15]
Find hashboard on Chain[0]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
chain[0] has no freq in PIC! Will use default freq=600 and jump over...
chain[2] has no freq in PIC! Will use default freq=600 and jump over...
chain[3] has no freq in PIC! Will use default freq=600 and jump over...
set command mode to VIL

singleBoardTest: AsicType = 1387

singleBoardTest: asicNum = 64

singleBoardTest: real AsicNum = 63

--- check asic number
set_baud=1
The min freq=700
set real timeout 52, need sleep=379392
disable_pic_dac on chain[0] testDone[0]=1
disable_pic_dac on chain[2] testDone[2]=1
disable_pic_dac on chain[3] testDone[3]=1
search freq for 1 times, completed chain = 3, total chain num = 3
restart Miner chance num=2
waiting for send_func to exit of chain[0]
waiting for send_func to exit of chain[1]
waiting for send_func to exit of chain[2]
waiting for send_func to exit of chain[3]
waiting for send_func to exit of chain[4]
waiting for send_func to exit of chain[5]
waiting for send_func to exit of chain[6]
waiting for send_func to exit of chain[7]
waiting for send_func to exit of chain[8]
waiting for send_func to exit of chain[9]
waiting for send_func to exit of chain[10]
waiting for send_func to exit of chain[11]
waiting for send_func to exit of chain[12]
waiting for send_func to exit of chain[13]
waiting for send_func to exit of chain[14]
waiting for send_func to exit of chain[15]
waiting for receive_func to exit!
waiting for pic heart to exit!
Start bmminer ...
Chain[J1] has no freq in PIC, set default freq=600M
Chain[J1] has no core num in PIC
Chain[J3] has no freq in PIC, set default freq=600M
Chain[J3] has no core num in PIC
Chain[J4] has no freq in PIC, set default freq=600M
Chain[J4] has no core num in PIC
read PIC voltage=897 on chain[0]
Chain:0 chipnum=63
Chain[J1] voltage added=0.0V
Chain[J1] [minerMAC: 00:1d:6c:ed:31:bf hashMAC: 00:00:00:00:00:00]
Chain:0 temp offset=0
Chain:0 base freq=100
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:0 max freq=600
Chain:0 min freq=600

read PIC voltage=897 on chain[2]
Chain:2 chipnum=63
Chain[J3] voltage added=0.0V
Chain[J3] [minerMAC: 00:1d:6c:ed:31:bf hashMAC: 00:00:00:00:00:00]
Chain:2 temp offset=0
Chain:2 base freq=100
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:2 max freq=600
Chain:2 min freq=600

read PIC voltage=897 on chain[3]
Chain:3 chipnum=62
Chain[J4] voltage added=0.0V
Chain[J4] [minerMAC: 00:1d:6c:ed:31:bf hashMAC: 00:00:00:00:00:00]
Chain:3 temp offset=0
Chain:3 base freq=100
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600
Chain:3 max freq=600
Chain:3 min freq=600

Miner fix freq ...
read PIC voltage=897 on chain[0]
Chain:0 chipnum=63
Chain[J1] voltage added=0.0V
Chain[J1] [minerMAC: 00:1d:6c:ed:31:bf hashMAC: 00:00:00:00:00:00]
Chain:0 temp offset=0
Chain:0 base freq=100
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:0 max freq=600
Chain:0 min freq=600

read PIC voltage=897 on chain[2]
Chain:2 chipnum=63
Chain[J3] voltage added=0.0V
Chain[J3] [minerMAC: 00:1d:6c:ed:31:bf hashMAC: 00:00:00:00:00:00]
Chain:2 temp offset=0
Chain:2 base freq=100
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:2 max freq=600
Chain:2 min freq=600

read PIC voltage=897 on chain[3]
Chain:3 chipnum=62
Chain[J4] voltage added=0.0V
Chain[J4] [minerMAC: 00:1d:6c:ed:31:bf hashMAC: 00:00:00:00:00:00]
Chain:3 temp offset=0
Chain:3 base freq=100
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600
Chain:3 max freq=600
Chain:3 min freq=600

max freq = 600
prepare send works thread on chain[0]
prepare send works thread on chain[1]
prepare send works thread on chain[2]
prepare send works thread on chain[3]
prepare send works thread on chain[4]
prepare send works thread on chain[5]
prepare send works thread on chain[6]
prepare send works thread on chain[7]
prepare send works thread on chain[8]
prepare send works thread on chain[9]
prepare send works thread on chain[10]
prepare send works thread on chain[11]
prepare send works thread on chain[12]
prepare send works thread on chain[13]
prepare send works thread on chain[14]
prepare send works thread on chain[15]
do 12 8xPatten test for 1 times
Find hashboard on Chain[0]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
use PIC voltage=897 on chain[0]
now set pic voltage=79 on chain[0]
use PIC voltage=897 on chain[2]
now set pic voltage=79 on chain[2]
use PIC voltage=897 on chain[3]
now set pic voltage=79 on chain[3]
enable_pic_dac on chain[0]
enable_pic_dac on chain[2]
enable_pic_dac on chain[3]
set command mode to VIL

doHeatBoard: AsicType = 1387

doHeatBoard: asicNum = 64

doHeatBoard: real AsicNum = 63

--- check asic number
check chain[0]: asicNum = 63
check chain[2]: asicNum = 63
check chain[3]: asicNum = 62
Error: The AsicNum=62 on chain[3]!
Set Freq of PIC for Test Patten on Chain[0]
Set Freq of PIC for Test Patten on Chain[2]
Set Freq of PIC for Test Patten on Chain[3]
set_baud=1

anyone got a older firmware file for s9 b9 ?

Ninetoe

Posts

Merits