Quote from: pjviitas on January 22, 2014, 05:10:20 AM

Quote from: soulofhoney on January 22, 2014, 04:52:11 AM

Quote from: pjviitas on January 22, 2014, 02:14:57 AM

Quote from: soulofhoney on January 22, 2014, 01:53:59 AM

Quote from: pjviitas on January 22, 2014, 01:41:12 AM

Quote from: Darthswan on January 22, 2014, 12:16:22 AM

Quote from: soulofhoney on January 22, 2014, 12:00:52 AM

Hello,

Guys i having some issue with the discards. The seem to be almost half of the accepted. What do the discards mean and how can they be reduced?

accepted = 4938
Rejected = 14
Discarded = 2915
stale = 1
diff = 767
diff1# = 3697137
diffA# = 3617613
diffR# = 3110
diffS# = 801
LSdiff = 767

Temps steady at 47-48 C

Any ideas?

Interesting. I have never seen a number in diffS#. I'm curious

I stopped paying attention to all those numbers and just look at my pool stats.

Well, that is the thing. The pool stats show low hash compared to what i see on the antminer webpage. Pool shows the hash jumping from 112 to 155 ish. But i never see anything close 180 gh.

But can somebody tell me what all those numbers mean?

Then you have a real problem. Your pool stats should be looking something like this for 2 overclocked miners.

Well for sure they are not like that. Any ideas whats the problem here?

Your temps don't look right....might be the calibration on the interface or it might be giving you good data.

Is your fan spinning? What is the ambient temperature? What kind of PSU are your running?

Well the ambient is around 26-28 C. The fan is running at time i can hear it go up in rpm and lower too. I have added two small 75 CF fans on the other side of the miner also.

PSU is a Hosiwell 750w 80+ Bronze

soulofhoney

Posts

Merits