Quote from: gaalx01 on May 26, 2018, 09:14:50 AM

Quote from: darval on May 25, 2018, 08:47:05 PM

Hey all,
I took the work that jstephanop did for the L3, cleaned it up a bit to make it easier to script with (there is a quiet mode which just outputs values). I then added support for the A3 based on the work that FNT did. We now have a single program that will work with both the L3 and A3 (don't have a D3 but it may work on that too).

At this point I would call it pre-release since although I have tested it on my L3's and A3's, it has not had a lot of testing. Some of the changes I made include timing changes in theory to make it faster, so I would be interested if you are seeing any error messages at all.

Like any of this stuff, use at your own risk. Shocked

Code and binary are here: https://github.com/darval/bitmain-tools

@jstephanop @FNT
If you guys want to merge all this into a single repo, I am good with that. Take a look at the changes I made and see if you see any issues, or are interested in merging it back into your versions.

Is there a compiled version for A3 or is the compiled version of v3.2 from L3 + suitable?

The compiled version in the release above works with both L3+ and A3. There is a flag 'set_voltage -l' for L3+ or 'set_voltage -a' for A3 that tells it which machine you are using it on. I could change it to autdetect but I figure you know what machine you are running on and I didn't to use the wrong protocol in case it caused unexpected side effects. Sad

darval

Posts

Merits