Quote from: AzzAz on February 17, 2017, 10:56:42 AM

Quote from: Schwacke on February 17, 2017, 10:19:48 AM

Quote from: Mitja1998 on February 17, 2017, 06:58:16 AM

Quote from: Schwacke on February 16, 2017, 11:16:41 PM

Quote from: Mitja1998 on February 16, 2017, 09:30:56 PM

Quote from: Schwacke on February 16, 2017, 09:15:04 PM

Quote from: Mitja1998 on February 16, 2017, 09:02:57 PM

modded rx 470 -285 h/s (80W in Afterburner), modded rx480 - 305 h/s (86W in Afterburner), modded HD7950 - 245 h/s (around 110w I think). Very nice results Claymore, you made equihash most profitable algo at nicehash again.

would you pls post your settings?

BR

rx470 4gb: one has 1256 mhz and other has 1260 mhz stock clocks, mem clock is 1750 mhz. Voltage is 985 mV.
rx480 8gb: core clock is 1266 mhz stock and mem clock is 2000 mhz. Voltage is 961 mV.
hd7950 3gb: core clock is 900 mhz, mem clock is 1250 mhz all stock. Voltage is 956 mV.

Thanks alot. but one thing i dont get i was searching and searching and then i gaved up.
In Afterburner the Core Voltage (mV) is set to 0. what do i change there? i can change from -100 to +100.

BR

You change mVolts. If your card is running on 1120 mV and you change it to -100 then you get 1020 mV. But I couldn't lower it more so I changed it in gpu's bios to 985 mV

is it save to change it to -100? sry for the noob question but i have no clue of undervolting and what will happen if i undervolt to much.

BR

depends of the card, some will hang.Some may work @ -100 even.

ok if it only will hang its ok. i thought it will burn something maybe.

Ty