Quote from: spyshagg on May 29, 2017, 11:08:00 AM

Quote from: papi92 on May 28, 2017, 09:48:12 PM

112W are too high for 30mh. You can optimize it more.

How? minimum voltage I can set in claymore is 900mv (0.88v) and I get 105watts (full card) for 27Mh/s on your bios. Can it go lower in bios mods?

Yes, it can! I thank that I made a bios for you with lower power consumption. I made my Hynix 30MH ETH, 570MH SC on 90W.

Quote from: spelunker on May 29, 2017, 11:51:16 AM

Quote from: spelunker on May 29, 2017, 10:49:50 AM

Quote from: Mattthev on May 29, 2017, 10:11:07 AM

Quote from: spelunker on May 29, 2017, 09:46:59 AM

Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.

Is it possible and how?
Thank you!

1st post performance timings UberMix 3.1
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx

Could elaborate please? Noob here. I know how to backup and flash via ATI Flash/Polaris Editor but don't know Ubermix.

I am using the performance timings Uber Mix 3.1 for Gigabyte Radeon Aeros RX580 8GB. I made a BIOS backup, then used the value stated: 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 on the 2000 timing, yet now all my cards hash at ~17MH/s (stock was 24MH/s). Also, when I use ATI Flash and Program the BIOS, the machine says VBIOS updated successfully, but the machine hangs. I am also just trying to restore the original BIOS at this point to return to 24MH/s with no luck. Please advice Sad

Thank you!

Give me your original BIOS. I will try to optimise it.