Quote from: YarMiner on June 03, 2017, 02:40:31 PM

Quote from: flminer on June 03, 2017, 11:50:08 AM

Just tried to set up on your pool with this bat:
ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://hub.miningpoolhub.com:12016 -u *minername* -p x -i 25 --pee

It will not connect to server. What did I get wrong? Thanks

Hello! I have the same problem, but I'm using SimpleMining OS with claymore-eth-v9.4 and this config:
-wd 1 -r 1 -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal YarMiner.$rigName -eworker YarMiner.$rigName -esm 0 -epsw x -allpools 1 -allcoins 1

It will not connect to the server too. What should I do? Thank you!

Use -esm 2 option.
-esm 1 is not compatible with 17020 port.

-esm 2, -esm 3
20535, 17020, 12020

-esm 1
20536

Quote from: ioglnx on June 03, 2017, 06:54:17 PM

Could you implement static diff for DGB Pools. Otherwise you load the little miners with to high diff and they never get anything.
Since the explode of hashing there even with 12000MH Skein you don't have much luck most of the hash is vaporized of the speed new blocks comes and so you hash for nothing than just hot air.

Other pools did it too ...small miners will appreciate the option.

Try new digibyte skein port 20534
It's fixed diff 8

Quote from: flminer on June 03, 2017, 10:01:04 PM

Finally got it going! How long does the auto exchange usually take once coins are sent to exchange?

4~6 hours for most coins.

Here's some info about it.
https://miningpoolhub.com/?page=account&action=autoexchange

Quote from: chocobo_rider on June 04, 2017, 01:14:08 AM

Hi, can you explain in laymans words how the "auto switches" work? is that feature related to multipoolminer or what?

Thank you

Auto switch provides one or two connection endpoint (port) but your mining coin may change as profitability changes.
Specific algo only switching is called algo switching. e.g.) ethash auto switching port is 17020
Multi algo switching is little bit complex, which can switch between different algo coins. You need to set hub miner to set Job which switch you want to join.

Auto switch is controlled from server.
Multipool miner is using auto switching for each algo but basically switching based on client side AFAIK.

Quote from: howard66 on June 04, 2017, 01:29:04 AM

Hi ! I just started with my first small test rig mining ETH with the claymore dual miner .

I'm getting:

"ETH: 06/04/17-03:22:20 - New job from europe.ethash-hub.miningpoolhub.com:20535 (FAILOVER 1)
ETH - Total Speed: 23.825 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:08
ETH: GPU0 23.825 Mh/s"

I was allready googling the FAILOVER 1 but I could not find what it means. Can anyone help me please?

Thank you so much

FAILOVER is a feature that you can list several pools to mine.

Miner will try to connect FAILOVER 1 first. If miner fails to mine from that server, then it will try next FAILOVER 2 server.
When FAILOVER 1 server comes up again, miner will get back to FAILOVER 1 soon.

This is mandatory thing for serious miners.

Quote from: molitar on June 04, 2017, 02:17:59 PM

This site is horrible for Siacoins. Get around 600 coins/day and on this one I have got a lousy 0.00000000 (141.78481475) unconfirmed in 24 hours.

PPLNS Target    13359607

Round Shares [Submitted shares since last found block (ie. round shares)]
Est. Shares    4,700,792 (done: 176.19%)
Your Valid    2,973.8299
Your Invalid    8.7312 (0.29%)

SC Estimates
Block    69.02179212
Fees    0.62119613
Donation    0.00000000
Payout    68.40059599

Network Info
Difficulty    80,758,987,932,851,088.00000000
Est. Avg. Time per Block    10 minutes
Current Block    107977

So I still make way more on nanopool with 2% fee.

Siacoin pool is quite small and siacoin block time is long.
It fluctuates much. Someday you get much more and someday you get much less.

Check the Blocks page.
https://siacoin.miningpoolhub.com/index.php?page=statistics&action=blocks

Mining Pool Hub

Sorry for late announcement.
I was busy doing some backend work to protect server.

There was DDoS attack on 4th June around 7 PM UTC
Attack lasted about 1 hour.

Some servers were affected and some miners were unable to submit shares.

Sorry for inconvenience.
I recommend you to set failover server which will make you not lose any hashrate.

Quote from: mamute on June 04, 2017, 11:25:35 PM

What's wrong with the monero pool?

LAST 20 BLOCKS FOUND
Block   Validity   Finder   Time   Difficulty   Amount   Expected Shares   Actual Shares   Percentage
1325416   70 left   unknown   04/06 22:09:43 (UTC)   0.00   0.000000   0   0   nan
1325403   70 left   unknown   04/06 21:37:16 (UTC)   0.00   0.000000   0   0   nan
1325371   70 left   unknown   04/06 20:28:07 (UTC)   0.00   0.000000   0   0   nan
1325288   70 left   unknown   04/06 17:28:16 (UTC)   0.00   0.000000   0   0   nan
1325286   70 left   unknown   04/06 17:25:21 (UTC)   0.00   0.000000   0   0   nan
1325190   70 left   unknown   04/06 15:07:27 (UTC)   0.00   0.000000   0   0   nan
1325174   70 left   unknown   04/06 14:23:26 (UTC)   0.00   0.000000   0   0   nan
1325134   70 left   unknown   04/06 12:57:50 (UTC)   0.00   0.000000   0   0   nan
1325106   70 left   unknown   04/06 12:15:39 (UTC)   0.00   0.000000   0   0   nan
1325095   70 left   unknown   04/06 11:57:58 (UTC)   0.00   0.000000   0   0   nan
1325069   70 left   unknown   04/06 10:59:06 (UTC)   0.00   0.000000   0   0   nan
1325016   70 left   anonymous   04/06 09:02:44 (UTC)   9,495,950,318.00   7.688613   593,496,895   109,900,325   18.52
1325007   61 left   anonymous   04/06 08:48:29 (UTC)   9,493,456,384.00   7.686394   593,341,024   115,052,697   19.39
1324993   47 left   anonymous   04/06 08:17:32 (UTC)   9,420,835,988.00   7.529301   588,802,249   466,379,015   79.21
1324954   8 left   anonymous   04/06 06:49:15 (UTC)   9,372,858,417.00   7.537616   585,803,651   491,732,038   83.94

Monero simple wallet hung rpc call and it was stuck for few hours.
It's resolved now.

Quote from: budiselich on June 05, 2017, 03:07:09 PM

Hi,

how long I need to wait for unconfirmed Siacoins to become confirmed? Mining now for day and a half and balance is still unconfirmed.

Thanks!

Usually it takes about a day. Sometimes when block is not found as expected, then confirmation would need more. This is coin's spec.

Quote from: timisis on June 05, 2017, 05:33:24 PM

I tried to dual mine eth and sia, the two issues I got was

a) the miner was showing the same hash rate for sia and eth, and the sia hash rate was too low compare to my normal hash rate, about 50 times lower.

b) I was not getting any shares for ethereum, just a hash rate and 0 shares.

I am mining on a single M60 GPU, can it be that eth shares take "forever", or was there some other problem you think.

What is actual hashrate of each algo from your hardware?
It should be at least some certain value. If it's too low, then it will need more time for pool to recognize your hashrate.

Quote from: Plumbus on June 05, 2017, 06:32:21 PM

The transfer/payout fees seem unusually high. Digibyte for example has a 1 DGB transfer fee. Suprnova has a 0.01 DGB transfer fee. I'd love to start using this pool for the multi-algorithm feature but not if I have to greatly reduce my payout frequency or deal with a much higher portion of my earning going to fees

Ah.. I lowered them to 0.01 DGB.
I hope you are satisifed.

Quote from: Firstishe on June 05, 2017, 09:00:10 PM

Hello!

there are plans to add ZEN pool?

IMHO promising coin.

Yeah I'll add that coin.

Quote from: cashen on June 06, 2017, 03:18:20 AM

IS this right.

I'm showing no shares.

Dashboard is cached, a bit delayed info.

Refreh this page later again.