Quote from: Siberian on August 08, 2017, 08:27:31 AM

Quote from: nukl on August 07, 2017, 11:58:43 AM

Quote from: Siberian on August 07, 2017, 10:35:39 AM

Quote from: nukl on August 02, 2017, 08:15:15 PM

Quote from: Siberian on August 01, 2017, 08:32:37 AM

Hi, guys!
I have Gigabyte GV-RX560 GAMING OC-4GD (Hynix(((), without overclocking I have 10.6 Mh/s.
Overclocking memory to 2000, brings an insignificant result. I have over9000 times tried to flash BIOS with different timings, but without success. Once I saw 16 Mh/s, but the driver left at once.
Substituting timings from Micron got 14 Mh/s at 2000 memory frequency it seems kind of stable, but HWinfo shows a lot of memory errors.
The best that could be achieved is 12.9 Mh/s and the overclocking of the memory of 1850 (with a small number of errors). I did not see in this topic that someone paid attention to memory errors. The question is: why does no one monitor errors? P.S.: GPU8 is 1050Ti. P.P.S: Sorry for my french.
https://cloclo41.datacloudmail.ru/weblink/thumb/xw1/FBcu/an3GMrmAg/560.jpg

Try to downclock core clock to 1050 - 1059. You will see higher rate and a little bit lower power comsumption Wink

Reducing the core frequency to 1050 has really slightly increased the Hash rate, now with a memory frequency of 1900 I have 13.5 Mh/s, with practically no memory errors, more has not yet been achieved. Thank you! The BIOS inserts values from the GPU with Micron memory https://cloud.mail.ru/public/ERgR/GpdGBMexD.

get back initial strap 1500 timing. after that you will be able to increase memory speed more than 2000+

Nukl, thank you very much for your advice! Now I can access the 2020 Mhz Memory Clock, and I have 14.4 Mh/s, that's enough for me (Claymore's 9. 8 ). Maybe my BIOS will be useful to someone (GV-RX560GAMING-OC-4GD (Hynix)). https://cloclo9.datacloudmail.ru/weblink/thumb/xw1/7qBU/R63dT3HVj/rx560.jpg?x-email=undefined, https://cloud.mail.ru/public/JUgC/uwfjv8sJR.

Hi:

I have the same card, I was trying your bios but my pc stops the drivers, I tried atikmdag-patcher with no luck, any ideas?.

Thx very much,

Carlos