Quote from: darkpandora on June 13, 2011, 01:02:22 AM

Quote from: darkpandora on June 12, 2011, 07:25:21 PM

Quote from: pandemic on June 12, 2011, 06:31:14 PM

Quote from: pandemic on June 12, 2011, 05:22:17 PM

Quote from: pandemic on June 12, 2011, 04:09:26 PM

Well I had 1.4 and 1.48 in the same folder compressed so I decompressed 1.48 to make sure that's the one it was running
I'm pretty sure I'm running 1.48 though.

I'm in Canada

edit: So far I'm running at 100% but only started it a few minutes ago.

On another note, my 4870 is running at 85-86mh/s stable.

edit2: after making sure I have 1.48, I'm still getting about 4-5%

edit3: After a bit more tweeking, I now have my 4870 up to 88-89mh/s. Sweeeeeeet

So, after doing that, my rejected is up to 23%.

All I did was turn on phatk. I had fastloop on before too when I was getting 4%. I've since turned both off and I'll look into both to see what exactly they do. Ah being a nub.

Fastloop: the fast loop argument for Phoenix. Can possibly increase mining speed if enabled.
phatk: uses the phatk kernel, optimization for HD58xx series only I think? You MUST have phatk already inside the kernels folder.

I took out all flags (bfi_int vectors worksize=128) and now mh/s is back up to 89. Before taking out those flags I was at 85mh/s with 10% rejected.

Still getting 8.5% rejected

edit: Just turned off fastloop, currently have 13 accepted and 0 rejected while still getting 89mh/s. Will let it run for a while like this.

annnnnd same issue. 11% rejected as of now.

i have 2 video cards, 6990 and 4870x2. on the 6990 i get 1% rejected and on the 4870x2 i get 90% rejected.
what am i doing wrong?
im starting the 6990 with this:

./phoenix.py -u http://XXXX:XXXX@bitcoins.lc:8080/ -k poclbm Device=0 VECTORS AGGRESSION=13 WORKSIZE=128 BFI_INT FASTLOOP=false

and i start the 4870x2 with this:

./phoenix.py -u http://XXXX:XXXX@bitcoins.lc:8080/ -k poclbm Device=2 AGGRESSION=13 WORKSIZE=256

please help:)
thanks.

ok so im still mining in this pool with my 6990 at 750 Mhash/s with 1% rejection.
BUT, on my 4870x2 i changed pool to btcguild and i got 0 (zero) rejection.

is something wrong with this pool? this pool dont accept or dont work well with cards (4870x2) that give low Mhash/s? why does my 6990 get 1% rejection while my 4870x2 get 95% on this pool?

i like this pool and i want to use one pool instead of tow pools.

anyone?