Quote from: logicassets on October 11, 2017, 10:10:39 PM

Can you snap a pic with that error with your phone? And then one of the clocks in the management console? I enabled the mvddc line thru Tytanick's suggestion. Perhaps that same root/utils/oc_dpm2.sh file on your boot drive is both the problem & solution to your error.

Quote from: chuck732 on October 11, 2017, 09:45:04 PM

Dude I am not the only one. One of the reasons tytanick push the update 1128 out was because some of the Nvidia users could not overclock! I have listen to the only I think 2 that replied and they said the same as each other said. Here others that are having overclocking problems.

https://bitcointalk.org/index.php?topic=1541084.msg22752842#msg22752842

https://bitcointalk.org/index.php?topic=1541084.msg22785701#msg22785701

Your not listening to me. I cannot change the power limit or the overclock setting. SMOS is not doing what you tell it to. Every time you save and it restarts you watch it scroll down the screen as it loads and come across Overclocking under this line you will see it say Missing Variables. So SMOS did not save or whatever the settings!

Quote from: ponkz on October 11, 2017, 08:29:27 PM

Quote from: chuck732 on October 11, 2017, 07:14:31 PM

As the OS is called Simple you cannot change any overclock or power limit settings! As I been saying in all my post the cards are averaging 177 watts and you cannot change it in Simplemining! The core is overclocked above 1900 MHz. You cannot change it to the stock clock of 1531 MHz or even to the Boost clock of 1721 MHz.

dude we all here using smos, and u are the only one who cannot set the power limit nor overclock
if u want help, try to listen to others
good luck Grin

Hello.
Im having similar issues to. But i like to point out that im pretty sure, it is related to video/bios video options/video ports, etc, something about that.

Im using, biostar tb250-btc pro for 12 GPUs, and only in some situations i can get the cards to overclock, and only some times. If someone have an advice, or this can help to solve the issue...

monitor connected to dvi port on the motherboard:

Primary display: Igfx
System boots but no video on monitor. I can control things on simplemining.net. Overclocking does not work.
Primary display: Auto or PEG
No video but overclocking works

monitor connected to dvi port on GPU on 16x port (with riser)
Primary display: Igfx
no video. no boot
Primary display: Auto or PEG
i can see a dialog: root@simpleminin.net, something like that. after that, monitor goes blank and i can only see a grin line and some purple dots at the top of the monitor.

Any advice would be appreciated.

Thanks