Quote from: burnin on July 01, 2013, 03:07:52 AM

Just a quick status update:

Bringing a prototype like that takes its time, thank you all for your patience.
I verified most of the functions now, and there were some changes that will find their way into the next revision
Hit some problems with the quarz clocking the micro, it would not always start to resonate, so I changed it to an Oscillator.

Power supplies - all working as expected
ASIC Upstream - working, stable
ASIC downstream - unstable, investigating
USB Connection - working
core voltage adjustment - working
CAN-BUS - in development
Temperature/Voltage sensing - in development

I had it hashing for a bit but the return interface for the nonce is not working stable at the moment. (about 10% HW errors)
I know whats causing the issues, have to change a part to get rid of them. (in the mail for Tuesday)
Power consumption at 5.1Ghash - ~36Watts

awesome update! Cheesy

Can someone confirm this one will do for 15 modules
http://www.coolermaster.com/product/Detail/powersupply/silent-pro-m2/silent-pro-m2-720w.html
Input Voltage 90-264Vac (Auto Range)
Input Current 11 5.5A
Input Frequency Range 47 - 63Hz
PFC Active PFC (>0.9)
Power Good Signal 100-500ms
Hold Up Time >17ms
Efficiency 85% Typically
MTBF 100,000 Hours
Protection OVP/UVP/OCP/OPP/OTP/SCP
Output Capacity 720W
Operation Temperature 0~40°C (Nominal Input Voltage)
Regulatory TUV / CE / UL / FCC / BSMI / GOST / C-tick / KC / CCC
Fan 135mm Hydraulic Dynamic Bearings
Certifications 80 Plus Bronze
Connector M/B 24 Pin Connector x 1
CPU 4+4 Pin x 1
PCI-E 6+2 Pin x 4
SATA x 9
4 Pin Peripheral x 5
4 Pin Floppy x 1

Thanks.