Quote from: Swimmer63 on November 01, 2013, 03:42:47 PM

Interested in how this is working with cgminer. Anyone using it successfully? Did cgminer find it on its own?

Yes cgminer should hot plug it.

Quote from: Blood Ninja on November 02, 2013, 02:40:50 AM

You have a spelling error in your Wheezy install instructions
Essential was spelled wrong should be

sudo apt-get install build-essential

Fixed, thanks.

Quote from: NorbyTheGeek on November 01, 2013, 07:38:54 PM

Quote from: x3maniac on November 01, 2013, 05:07:00 PM

according to luke

https://bitcointalk.org/index.php?topic=168174.msg3450533#msg3450533

you can't use them together

Quote from: Luke-Jr on October 31, 2013, 04:23:39 PM

Just don't use -S :all
This tells BFGMiner to probe every port for the device.
Erupters can't handle BigPic probes, and BigPic can't handle Icarus probes.

I understand that to mean that you can't probe (:all) if you have both. You can still specify each serial port manually. I was asking if there's an alternative.

Currently I don't think so, you will need to specify the com port.

Quote from: Blood Ninja on November 02, 2013, 02:57:32 AM

switched to your specific Raspbian Wheezy Setup Bfgminer build and still only getting 2.3GH

Look like these are performing 20% lower than spec.

Can you please try minepeon 0.2.4 on your raspberry pi. Arch is a lot better then raspbian. Also how is it connected up is it directly connected to the raspi?