Quote from: jillscarbrough on July 23, 2018, 09:08:20 AM

You've asked to provide more info above. Those logs showed something went wrong (that's only the result) we need something that may cause that. As other people said above, it can be caused by various reasons:

Power Issue: then tell us PSUs that you are using
OverClock - Under Volt: then tell us your current OC-UV settings.
And so on..

Show us your bat file, hide your sensitive info! It will make us easier to analyze your problems.

Quote from: vb.mohsen2 on July 23, 2018, 06:22:11 AM

........
23:57:33:427   185c   Minimal speed ("-minspeed" option) was set to 175 MH/s. Miner cannot reach this speed for 5 minutes, need to restart miner!
23:57:34:677   185c   Restarting OK, exit...

this occure whit two gpu's "3,5" rarely gpu 0

iuse claymore 11.9 with 18.5 amd driver. now actually i use claymore 11.5 with blockchain driver before, but this happens again .with one difference .its not restart claymore but stuck on this :
    WATCHDOG: GPU 5 hangs in OpenCL call, exit

It showed that you've set (-minspeed), when your rig doesn't reach that specified amount of speed, the miner will restart nor call (-r) parameter (if -r set to "1") it will re-starting Claymore.

Try to bring back your cards setting (troubled card) to default may help.

Will be better to visit Claymore official thread for the best result related to your problem!

https://bitcointalk.org/index.php?topic=1433925.0

i use 650 psu for every 4 aours rx570 and my wattage is under 600watt for each psu and i have no problem until now .i have another rig that i did exactly this configuration and have no problem at all.
this is my claymore settings:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal '''' -epsw x -cvddc 920 -mvddc 920 -minspeed 175 -ethi 6 -asm 2 -ttli 56 -tstop 72

coreclock is on the bios and its set on 1150 and memclock on 2050 and in the other rig that work without problem the cvddc and mvddc is on 900 on rx580
i tried some other clock but the problem not solved