Quote from: gt_addict on July 07, 2019, 04:31:05 PM

Is it the version that VH has listed on the first page of this thread? If it is then it will autotune upto the freq you set in the bat file.

EDIT:

If you set at 600 then it will find the best freq UPTO that point. But your sticks may well have a max freq LESS than that, at which point it will not be 600.

true: got 6 newpac's atm,
3x 600 Mhz
1x 563 Mhz
2x 463 Mhz

Als start with 600 as target, after a while they are adapted to max performance when u use vh's version

Oh, and don't forget to cool when going over 100 Mhz !

Quote from: ZimbaCardi on July 06, 2019, 05:04:41 PM

If by 7th port you mean port 1, diagram on back states 2A for ports D & 1, so depends on the amps you pull on the D port plus newpack @600 Mhz (Yikes!)

Mine pull 0.81A @200

https://i.imgur.com/b0QpYlO.jpg

well i am running @ 600 Mhz as target, not all sticks stick to that.

Can't see backside, i am using the hub. Another hub is on its way, so i'll look @ it when it arrives. (google can't provide me with picture of backside).