Re: [CMD] FarmWatchBot Ewbf, Claymore, Bminer, Dstm, CC, Eth, CastXMR, Phoenix
C вoзвpaщeниeм! 
Благодарю! Рад, очень рад!
C вoзвpaщeниeм! 
A пoд t-Rex бyдeт вapиaнт??
Bapиaнт пoд ccminer для нeгo нe пoдxoдит...
A пoд t-Rex бyдeт вapиaнт??
Bapиaнт пoд ccminer для нeгo нe пoдxoдит...
И вам здравствуйте! Напишите в Телегу, мне нужны логи и я что-то придумаю, давно уже обещал, надо держать слово.
Can this program set the over clock for NVIDIA cards RTX 3060 before the Phoenix miner starts and then change the overclock settings after 5 minutes of the miner running?
The RTX 3060 ti cards run very stable on mem clock under +1000 of MSI after burner, (gets 59MH)
that is the only way to start to run them stable but after the DAG is created you can increase the Memclock to 1250 for 61.5MHs at that memory clock it can even go through Epoch change without much issue
the cards can easily go up to 64 MH with mem clock of +1500 but they wont pass epoch change like that.
I need a way to start the cards at low mem clock and change them to +1500 in 10 minutes or so and watch the cards Hash or failed shares , if they fall , it should restart the phonexi again with low mem and increase it in 10 min.
windows 10 64 here
The RTX 3060 ti cards run very stable on mem clock under +1000 of MSI after burner, (gets 59MH)
that is the only way to start to run them stable but after the DAG is created you can increase the Memclock to 1250 for 61.5MHs at that memory clock it can even go through Epoch change without much issue
the cards can easily go up to 64 MH with mem clock of +1500 but they wont pass epoch change like that.
I need a way to start the cards at low mem clock and change them to +1500 in 10 minutes or so and watch the cards Hash or failed shares , if they fall , it should restart the phonexi again with low mem and increase it in 10 min.
windows 10 64 here
Yes, you can try.
1) Setup MSI afterburner program with default OC for 59MH for Profile 1 and add it to Windows autorun
2) Use Cinfig.ini script file with values - ocprogram=2, profile=2 (with OC for 61.5MH), octimeout=120 (or more if you need more time to wait), lauchocprogram=1
Or you can buy premium version and setup it manually from Telegram using bot commands to change OC Profiles.
----------------------
Thank you for the info, That was very interesting,
1) Is there a way to reduce the 30 second delay before miner starts?
2) This does not help with miner Restart issue, but it helps with windows Restart.
I still have a problem if I restart Just the Phoenixminer, the over clock was already set too high, I need the OC to be set to Profile 1 (+950 mem clock) every time the miner starts and then switch to profile 2 (mem clock +1500) after 5 minutes of starting. can I set that in the config file?
3) Is there a way to check the Hash rate of the GPU instead of the WHOLE rig?
4) Is there a way to check Failed Shares and restart the miner or windows if a certain number of Failed Shares detected?
THANK YOU
Just got this error after 60Hours of running
MINERZ: Running for 59:12:29 on naw-eth.hiveon.net
MINERZ: Miner must be restarted, large log file size, please wait...
the miner was hashing okay and no other issue beside the log file size
is this by design? should I expect this every 60 hours?
How can I avoid it
Thank you
MINERZ: Running for 59:12:29 on naw-eth.hiveon.net
MINERZ: Miner must be restarted, large log file size, please wait...
the miner was hashing okay and no other issue beside the log file size
is this by design? should I expect this every 60 hours?
How can I avoid it
Thank you
how can I set the miner to restart if it's getting a whole bunch of unaccepted shares?
hashrateerrors=5 did not do it...
hashrateerrors=5 did not do it...
Answered all questions in Telegram. And realysed new feature for you.
☄️ Список изменений - 2.0.9-2.1.0
Добавлена опция для разгона в два этапа (актуально для RTX 30xx серии). Скрипт задаёт профиль разгона перед запуском майнера и потом еще раз задаёт другой профиль после запуска майнера. Таким образом можно реализовать плавный разгон или другие идеи.
☄️ Changelog - 2.0.9-2.1.0
Added option for overclocking in two stages (relevant for RTX 30xx series). The script sets the overclocking profile before starting the Miner and then sets another profile again after starting the Miner. In this way, smooth overclocking or other ideas can be realized.