Quote from: scarlott57@bellsouth.net on March 31, 2014, 12:21:16 AM

As a side note or question are all of these small tp link Routers supported if so does anyone have a list of one's that would work without haveing to change the tecnobit downloads Thanks.

the reason I ask is I may have bricked this 3020 and If I can use a different model TL router that I may find locally instead of waiting a week to receive one in the Mail. Thanks.

The firmware write specifically for TL-MR3020 only. I was curious what exactly happen on your's since there is no change that the router brick after network problem.

But you can try this:

Quote from: 2GOOD on February 22, 2014, 12:42:38 AM

Failsafe Mode
Set your computer's IP to 192.168.1.2, subnet 255.255.255.0
Connect the TL-MR3020 to your computer via ethernet
Power on the TL-MR3020
When the WPS button starts to blink:
on AA (Attitude Adjustment / 12.09) push the WPS button;
on BB (Breaking Barrier / trunk) move the sliding switch quickly from one side to the other.
Do this until the WPS button starts blinking faster.
The device is now in Failsafe-Mode
You may access it by using telnet 192.168.1.1
Info on resetting to OpenWrt defaults can be found at: generic.failsafe