Quote from: philipma1957 on Today at 08:26:57 PM

I hooked up my nano 3 this one came from davef I am using the 165watt dell psu

I set it to high and it reads 127 watts on the software screen.

I will slap in a kill-watt-meter

also I have a infrared thermometer lets see if the 165watt dell psu gets to a stupid temp.

gets to 121 temp better than 140 that the others get to but stupid hot

i read 125-127 watts for full speed on the software screen. the kwatt meter reads 141.

So 141 watts and 4.15 th is just over 31 watts a th.

backed it off to middle sitting.

85-88 watts on avalon screen
98 watts on kill-a-watt
3.05th
psu case is 129 f

like the miner.
don’t like that you must use an app rather just log in. the log in does not have speed control
so you will always use both the login and the app. note could be missing a way to use pc to change speeds.

I don’t like a lack of eth cable

but running it at middle speed does seem sweet.

Thanks for the update! No pressure but feel free to let us know the micro quantity of a BTC you pull in a 24 hour period.
I think the best value proposition longer term path is medium mode. There was even a video of someone who tried using a high end Apple USB-C that was capped at medium mode.

Are you by chance able to comment at all on this; in the mining management setup process for this Nano 3, is it easy/doable to just paste in your NiceHash SHA256 URL into that first field in the Nano 3, "Pool Address 1" ? Cheers