Quote from: Buchi-88 on June 02, 2014, 03:58:07 PM

Hello guys,

so I have test a little bit he HUB, and I think its a good quality Wink

Only the voltage is on the lower end of the USB standard.

My Devices: 10 x Antminer U2+ (~ 1,8 GH/s / anu-freq:225), 8 x Bfx2 (~ 3,5 GH/s / bxm-bits:53)

Here my table:

USB port	Device	Voltage	amperage
1	Bfx2	4,45	1,01
2	Antminer	4,55	0,61
3	Bfx2	4,40	1,05
4	Antminer	4,50	0,62
5	Antminer	4,60	0,64
6	Bfx2	4,40	1,05
7	Antminer	4,60	0,64
8	Bfx2	4,45	1,02
9	Bfx2	4,45	1,07
10	Antminer	4,60	0,61
11	Bfx2	4,45	1,01
12	Antminer	4,55	0,61
13	Antminer	4,65	0,59
14	Bfx2	4,45	1,07
15	Antminer	4,65	0,58
16	Bfx2	4,61	1,01
17	Antminer	4,55	0,61
18	Antminer	4,50	0,61
19	Empty for Pi later

So when the voltage is OK, I can say a good result about the measurement. I hope for the permanent load about 16 A is for the HUB no problem?

At time my results from the Cgminer, one Bfx2 is a little bit slower...

Quote

regards

Nice results! The 16A load should be no problem. I have mine filled with 16 x Twin Chips and it has been running fine for weeks now Wink