Quote from: pr0d1gy on July 09, 2014, 02:36:36 AM

Installation and use is pretty simple.

But I do have a question. Got my Thunder x3 hooked up, and in the first 60 seconds the HW is over 2000, should I be worried?

Rate     Pool Accept/Reject   HW
31020 Kh/s   N/A     18 / 0 0.00%   2084

Nothing turns red on the web console till about 6 mins, then its like

Rate     Pool Accept/Reject   HW
30410 Kh/s   N/A     121 / 1 0.82%   12707

You can change the "alerts" in the webUI's configuration page on the HW errors. Your reject rate though is quite low, so I would not be too worried about it (this is an ASIC after all versus a GPU). If there was a high amount of rejects with the hardware errors, then I would be concerned.

Happy and profitable mining to all! Cool