Quote from: OptimusPrime007 on July 25, 2014, 02:09:03 AM

Hello miners,

I recently bought Antminer S3 and after all required setting configuaration the miner remains in standby mode (Red light off and green light blinking per second).
Here is all required information:

--my ipconfig is: --

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : westell.com
Link-local IPv6 Address . . . . . : fe80::fd99:662:caa3:612%12
IPv4 Address. . . . . . . . . . . : 192.168.0.193
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::2557:f20c:960f:e444%11
IPv4 Address. . . . . . . . . . . : 192.168.1.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
-----------------------

My router ip is 192.168.0.1

--ANTMINER S3 Miner's WAN Configuaration--

Protocol - Static
IPv4 address - 192.168.1.99
IPv4 netmask - 255.255.255.0
IPv4 gateway - 192.168.0.1
IPv4 broadcast - 192.168.1.255
Use custom DNS servers - 192.168.0.1
----------------------------------------------------

Also when I insert the ethernet cord from Antminer S3 into computer's ethernet port, will it start mining if the configuration is correct? Or I have to remove the ethernet cord from computer and insert it into router?

Please help!
Thanks in advance.

Protocol - Static
IPv4 address - 192.168.1.99
IPv4 netmask - 255.255.255.0
IPv4 gateway - 192.168.0.1

This is not correct, the gateway cannot be on a different subnet.