The  new  version  is  finally  ready.  You  can  download  PhoenixMiner  5.8a  from  here:

PhoenixMiner_5.8a_Windows.zip Github
PhoenixMiner_5.8a_Linux.tar.gz Github


Changes in version 5.8a :

• LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a

So I just checked my latest energy bill, and it shows this: "Basic/total electric service: $0.085/khw" which is actually the cheapest electric I've gotten in a few years

Hey idk where to put this either the mining or the pool section, but I just got an L3+ miner running Blissz, I was just wondering if there is any other pools or coins that would be more beneficial? Right now I am running Litecoinpool(dot)org, avg hashrate is 521Mh/s, 24 avg rewards 0.0631 LTC --- I want to know if that is good (or not) and/or if there are any other alt-scrypt coins that might be more beneficial?

Thank you thank you!

Yeah, I have about 15 eth cables just sitting in a box, I tried all of them, had some cat5, cat5e, and cat6 different lengths as well, tried plugging into my laptop and the router and nothing. I do not have a hub/switch

Well crud, I don't have the money to be able to buy a new control board.... So I have a very expensive paper weight it looks like, until I get enough money to buy a new one.
Ugh

So I've tried both what you said and taking it to a friends house that is a 192.x.x.x network, their network didn't show the miner as well... I tried connecting the miner directly to my laptops ethernet port as well, and still nothing. I also timed myself holding the "reset" button for a good 240 seconds (4 minutes) before my arms got tired, but no matter how short OR how long I held it, it didn't beep or flash anything differently.

I've also tried re-downloading the stock firmware and put it on a micro SD card, plopped it in and didn't notice anything new/different.

My network (Xfinity) is 10.0.0.1-10.0.0.254, today (5/21/2021) I have searched with Angry IP Scanner, Advanced IP Scanner, and the IP report tool and does not show anything, no new IP addresses.

RIGHT as soon as I plug it in to an electrical port, the Fault light will blink for about 0.5 sec and then stop, the "Normal" light does not blink at all.

Seller said he had it on stock configuration and then suggested the Blissz configuration.

https://imgur.com/a/gfPUFTS

I took 4 pictures of me doing that fourth try, power on count to 30 then I pressed reset, and held for about 90-100 seconds. Still same thing. Advanced & Angry IP scanner does not find anything new.

Sorry to anyone for posting it to bitcoin not altcoins!

I have tried all that, I have plugged it into 2 hashing boards not all 4 of them, did the reset button (held it for at least 45 seconds) and nothing changed. The ethernet lights are on, but Fault/Normal are off, and then on the back of the controller board there is 2 solid-red lights, but I can't read what those lights say

Hi there! I am a noob when it comes to miners. I've been in "IT"Desktop Support for several years, but I just bought an Antminer L3+ last night, and having an impossible time trying to get it running and my Xfinity to show me the IP...

I have tried 3 different areas of the house that would be the least bothersome, the fans run, the Ethernet light turns on but "Fault" + "Normal" lights do not show, there is 2 red lights on the controller board, but that's about it.

I have also tried 5 different ethernet cords to check if it was those as well, still nothing.

All I have in my apartment is 110v connectors, and I had done extensive research with the L3+ + the APW3++ PSU and it does say it can run on 110v but just a lower efficiency//lower wattage, and I was okay with that. But I can't even get it to fully run.

There is no SD card in there, I tried plopping on in there with "LATEST (NO DEV FEE) Blissz Custom Firmware (v1.02) fits Antminer L3+, L3++" from ebay, and still nothing.

I am getting frustrated because my fiancee trusted me that it would work, and now it doesn't. The guy I got it from has been trying to help me throughout this, was texting him all last night and this morning but he can't figure it out because it was running at his place. Living in an apartment though, I CANNOT install a 220v plug, which is kinda dumb lol.


Thank you thank you for anyone that is able to help!!!!!!!

Is this coin alive? I just got an email saying my 9000 BCB is available to download for the BetaNet wallet

Been keeping my eye on Blockwage, and it looks good so far. Just the start of something good!
I know in the future it will hold up well. The community is also really nice as well!

Looks like a really good project so far. I will be keeping an eye on it, and hopeful for the future of Xavander Coin. I love the message behind the coin as well.

I have been in AdlerCash's discord and been talking for quite a while, and I have a MN myself as well.
So far I think ADL has the potential to be a good coin, it hasn't hit any exchanges yet except for Escodex which is being used for the presale, however there is talk it should hit an exchange in the next week or less (hopefully less) so that way we can start getting some good volume for CMC and others to come.

Let's hope that it goes well in the next week for some good volume!

Pretty good project so far, looking into it while reading the White paper and talking to the discord community, I have high hopes for this coins roadmap and goals.

Pretty bland, almost seems like it might be a scam/waste of time coin.

1.The "White Paper" is about 6 paragraphs long.
2. When I go to the website and click "PowAdv Miner" it brings me to the github master repositories, but there is no actual miner within any of the branches.
3. On your ANN when I click the "smart contract" it just brings me to the main page of etherscan, no smart contract until I actually go onto the website itself and click the contract.
4. When I click the link under "- Miner Source/Download(Pool compatiable):" just brings me to the main github webpage itself.



5. Most importantly, this "Hard Fork" literally looks like the same exact coin except a different name, and different difficulty adjustment period from 1,000 blocks to 32 blocks. (Same algo, same "minable ERC20 token", same token supply, same decimal places, same block reward, the PowAdv website links to the PoWEth ERC20 Token Contract Address) Pretty similar "use cases and features", same layout of the website from PowEth to PowAdv.....

Pretty underwhelming :/ and sad...

Read this that I just quoted the other guy:

They use USA punctuation, so 10.000 coins is 10 coins and 0 sub coins ($1.00 USD = 1 dollar and no cents)

Source: I live in USA, and I've been on stl hpool for 5 hours now, and been getting paid 13 coins, 43 coins, 31 coins, 37 coins, 28.5 coins, 19.5 coins, etc, not having to wait for 10 thousand coins.

It doesn't seem so far off as people might think. Even today, there is the ability to "buy" or "claim" stars (like the literal stars that you look up and see) if you pay a substantial amount of money, NASA and all them will "coin" your name on that specific star that you bought.

I am looking into this project and it does seem pretty fair, and I might invest into it. It looks really good so far.