Search Posts

Post

Topic

Board Mining (Altcoins)

Re: [ANN] RainbowMiner v4.5.3.9 - most versatile multipool mining, AMD, NVIDIA, CPU

astronyu

on 16/03/2020, 15:58:30 UTC

Great software.

Just want to say that I've been using this miner for few weeks now and I'm very happy with how it performs and how the dev response to questions.
I mine mostly at MPH, NH, 6Block and also list out the rig on MRR.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] RainbowMiner v4.5.3.9 - most versatile multipool mining, AMD, NVIDIA, CPU

astronyu

on 04/03/2020, 01:52:20 UTC

Hi, in regards to setup MRR.

Code:

2. Setup Rainbowminer

   add "MiningRigRentals" to the PoolName list and make sure it is not in the ExcludePoolName list (config.txt or [C]onfiguration->[S]elections)

   edit "Config\pools.config.txt", find the MiningRigRentals section and add (API_Secret, User) or edit the following data:

   "API_Key": "", "API_Secret": "", "User": "", "Worker": "", "EnableMining": "0",

[b]All rigs will be automatically set to status "online", at MiningRigRentals and rest idle within RainbowMiner.[/b] If someone starts a rental, RainbowMiner will detect this and run the respective miner exclusively, until the rental ends. All other rigs on MiningRigRentals will be deactivated, for that time.

If you want to include MiningRigRentals into RainbowMiner's profitability checks and switching operation, so that it behaves just like a normal pool, set "EnableMining" to "1". Only do this, if MiningRigRentals is your only pool, because the mining prices (these are the prices setup at MiningRigRentals), will not reflect the real market prices.

I have all of these setup "API_Key": "", "API_Secret": "", "User": "", "Worker": "", "EnableMining": "0"
but I did not see my rig became online in MRR after setting it up on RBMiner though, does RBMiner setup the algo of the rig on MRR or I need to setup it manually?

>>> http://rig.rent/rigs/152632

Post

Topic

Board Mining (Altcoins)

Re: [ANN] RainbowMiner v4.5.3.9 - most versatile multipool mining, AMD, NVIDIA, CPU

astronyu

on 26/02/2020, 03:31:52 UTC

Quote from: rainbowminer on February 25, 2020, 07:40:51 PM

Quote from: astronyu on February 24, 2020, 05:24:07 PM

Thanks for the reply, that means I can change my wallet address to use Eth instead of BTC correct?

Code:

"MiningPoolHub": {
   "ETH": "",
   "Worker": "$WorkerName",
   "Penalty": "0"
}

Also, I still can't figure out how to setup the miner to mine on nicehash.

You will need you MiningPoolHub username, not your mining address. If you autoexchange to ETH, your config would look like this:

Code:

"MiningPoolHub": {
   "User": "",
   "API_ID": "",
   "API_Key": "",
   "AECurrency": "ETH",
...
}

.. no need to set "BTC", "ETH" or else, for this pool.

To be able to mine Nicehash, register an account with them and find out your BTC mining address. Put this to "BTC" field in pools.config.txt:

Code:

"Nicehash": {
"BTC": "",
...
}

Finally - make sure MiningPoolHub and Nicehash are on your "PoolName" list in config.txt

Code:

"PoolName": "MiningPoolHub,Nicehash",

I see, so the BTC address I have in the config will be just for other pool's usage where MPH will use the settings I have in their pool for autoexchange as long as I set AExchange to my currency. Thanks.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] RainbowMiner v4.5.3.9 - most versatile multipool mining, AMD, NVIDIA, CPU

astronyu

on 24/02/2020, 17:24:07 UTC

Thanks for the reply, that means I can change my wallet address to use Eth instead of BTC correct?

Code:

"MiningPoolHub": {
   "ETH": "",
   "Worker": "$WorkerName",
   "Penalty": "0"
}

Also, I still can't figure out how to setup the miner to mine on nicehash.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] RainbowMiner v4.5.3.9 - most versatile multipool mining, AMD, NVIDIA, CPU

astronyu

on 23/02/2020, 09:08:07 UTC

Hi, does this support multi algo mining with mph?

Post

Topic

Board Mining (Altcoins)

astronyu

on 17/02/2020, 11:25:23 UTC

Can I use this with Eth address? I'm mining on mph multi algo and auto convert to eth.

Post

Topic

Board Mining (Altcoins)

Re: NPlusMiner - | NVIDIA/CPU miner | Autoupdate | Auto Pool/Algo switching

astronyu

on 10/02/2019, 19:39:49 UTC

Quote from: astronyu on February 05, 2019, 10:57:57 PM

Quote from: MrPlus on February 05, 2019, 05:13:13 PM

Quote from: astronyu on February 05, 2019, 03:03:38 AM

Mr.Plus, I'm autoswitching on MPH and all balance will be auto-exchange to Eth, can I still use NPlusMiner?

Also, for some reason, benchmarking Eth seems to not working as it always shows 0 MH/s.

I'm on 6x 1060.

*previously using NemoMiner but it gave failure status and I don't know why it only listed a few algo after updating.

Yes, you can still use NPlusMiner even if it will still report BTC.
Does EthMiner raise any errors?

+ MrPlus

No errors, see below:

I started using nicerminer again since both Nemosminer and NPlusminer not benchmarking my card for other than neoscrypt. Hopefully this will get sorted out soon.

Post

Topic

Board Mining (Altcoins)

Re: NPlusMiner - | NVIDIA/CPU miner | Autoupdate | Auto Pool/Algo switching

astronyu

on 05/02/2019, 22:57:57 UTC

Quote from: MrPlus on February 05, 2019, 05:13:13 PM

Quote from: astronyu on February 05, 2019, 03:03:38 AM

Yes, you can still use NPlusMiner even if it will still report BTC.
Does EthMiner raise any errors?

+ MrPlus

No errors, see below:

Post

Topic

Board Mining (Altcoins)

Re: NPlusMiner - | NVIDIA/CPU miner | Autoupdate | Auto Pool/Algo switching

astronyu

on 05/02/2019, 03:03:38 UTC

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.4 - MPH mining app based on NHML v1.9.0.3

astronyu

on 28/06/2018, 06:27:03 UTC

Curious, has the p0 state fixed in 0.5.4 Huh

also, have anyone manage to benchmark neoscrypt with gtx1060? Mine got either time out of terminated.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.3 - MPH mining app based on NHML v1.9.0.3

astronyu

on 11/06/2018, 13:03:37 UTC

Quote from: mobileanarchy on June 11, 2018, 12:44:24 PM

Quote from: Maddcow on June 09, 2018, 03:18:52 AM

Would is be possible to add pheonixminer to this?

I will have to investigate their API to see if they it provides all the info the UI needs.

Regarding the P0 state - my first suggestion will be to try to run the miner as an administrator to see if that solves it.

The miner was running as administrator.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.3 - MPH mining app based on NHML v1.9.0.3

astronyu

on 09/06/2018, 16:20:11 UTC

Not sure what happened but I think the P0 state did not work for me. It throw this errors

For now I unchecked the option in the setting. Would love to know if I can get this working as it supposed to give some boost for mining as the card will run more efficiently if I'm correct?

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.3 - MPH mining app based on NHML v1.9.0.3

astronyu

on 08/06/2018, 05:21:44 UTC

Quote from: bitbomber05 on June 07, 2018, 11:48:33 PM

Quote from: astronyu on June 07, 2018, 08:12:21 AM

Quote from: mobileanarchy on June 07, 2018, 03:02:47 AM

Release 0.5.3 - 2018-06-06
Fixing a bug with stats readout from the newly added ethminer 0.14.0
Adding nvidiasetp0state.exe to optimize Nvidia mining

Download NicerMiner v0.5.3:
https://github.com/odedolive/NicerMiner/raw/master/releases/NicerMiner%200.5.3.zip

-----------

I'm looking at adding the JCE miner.
I'm having issues with it at the moment, the GUI is having problems detecting the process and killing it once the benchmark is done.
I'm almost there. the API is already working (if I kill the benchmark process manually I can start mining using it, and I see the proper hashrate in the UI)... the only think left is to make sure the process is killed successfully.

Thanks again for all the feedback.
Let me know if there's anything else I can do for you guys.

I'm assuming the issues with the lingering ethminer window is a result of the bug I just fixed (0 hashrate readout)
Please let me know if this issue persist in the latest version - I'm unable to reproduce on my environment.

Thank you. Previous issue with ethminer hashrate on UI and lingering windows now fixed.

A question, how to actually make Nicerminer to start with windows? Checking the "start with windows" won't work as as soon as you save and close the setting window, going back in you'll see the tickbox being unchecked again.

I had issues with this when i first started using NiceHash, got around it by using Windows Scheduler to launch it delayed by a few minutes on startup then wrote a small batch file to start it hidden which was also giving me grief. Maybe give scheduler a go.

Thanks, it was what I did too after giving up trying to get the auto start working. Using scheduler with 30sec delay.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.3 - MPH mining app based on NHML v1.9.0.3

astronyu

on 07/06/2018, 08:12:21 UTC

Quote from: mobileanarchy on June 07, 2018, 03:02:47 AM

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.2 - MPH mining app based on NHML v1.9.0.3

astronyu

on 06/06/2018, 03:08:20 UTC

Quote from: bitbomber05 on June 05, 2018, 10:49:10 PM

Can confirm that NM 1.9.0.3 doesn't show has rate for the new ethminer even though its mining in the console.
But I haven't had any issues with NeoScrypt or CNv7 in relation to CUDA. Though I'm on CUDA 9.0.176, for some reason I cant get 9.2 to install on my PC.

EDIT: updated to CUDA 9.2 (after long uninstall) and all seems to be working ok.
@astronyu where did you see that neosrypt and and cnv7 dont support CUDA?

From the benchmark log. It doesn't help to run all the benchmark again too, tried and same thing.

Yet another issue to report.

With version 0.5.2, the new ethminer seems to always start and will ignore current profitable coin. Even when the UI reporting using all GPUs to mine Equihash, ethminer console kept opened and did not shut down. The GPU ends up sort of dual mining Eth and Equihash. Restarting the console (via UI) will then mined profitable coin but when it auto switch to Eth, ethminer will again refused to shut down.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.2 - MPH mining app based on NHML v1.9.0.3

astronyu

on 05/06/2018, 20:09:07 UTC

Quote from: mobileanarchy on June 05, 2018, 03:05:37 PM

I see...
Does the benchmark for the new ethminer (ethminerLatest) finish successfully? What is your hashrate compared to the one shipped by default?
I'll take another look at the API calls ASAP, in the meantime, this is a minor visual bug, you can still use this version if you find it more stable than the previous one.

Benchmark was completed successfully. The new ethminer vs old, there was at least a little bit increase of hashrate and but I think the new ethminer is more stable.
Curious, for the new ethminer, does it follow DAG load setting from the UI?

Other feedback:
Unrelated to the ethminer above, I checked NeoScrypt and CryptoNight7 benchmark, it mentioned card does not support CUDA 9.1. (PC has CUDA 9.2 installed).
As for additional miner, maybe you could add Excavator miner?

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.2 - MPH mining app based on NHML v1.9.0.3

astronyu

on 05/06/2018, 14:58:28 UTC

Quote from: mobileanarchy on June 05, 2018, 01:40:45 PM

Well... looking at the screenshot you posted, ethminer is reporting 0 hashes/second on the console, so the UI will do the same.
Maybe give it a few minutes for the DAG file to initialize on each GPU.
This has to work, as it passed benchmark, and a real hashrate was loaded successfully (otherwise the UI would have never picked/used that miner to begin with)

Now that I figured out how to add additional miners, I'm very interested in adding the best-in-class miners/versions to this application.
Any suggestions based on experience? which miner should I add next?

Unfortunately, I sold all my AMD GPUs, so it's going to be hard/impossible to add and test AMD miners, but I have a couple of Nvidia 10XX rigs.

The console actually showing 82MH/s mining eth, the screenshots only showing the first few lines after it restarted. UI doesn't show mining rate for new ethminer.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.1 - MPH mining app based on NHML v1.9.0.2

astronyu

on 05/06/2018, 08:30:04 UTC

Quote from: bitbomber05 on June 04, 2018, 09:56:55 PM

Quote from: astronyu on June 03, 2018, 10:39:20 PM

Quote from: bitbomber05 on June 03, 2018, 09:55:42 PM

Quote from: astronyu on June 03, 2018, 10:38:17 AM

May I know if there is a script or software to notify us in case of miner crashed?
Checked my MPH stats and saw no activity, remotely logged into the pc and saw NM was not running at all.

I've never had any issues with the miner crashing, the only time its stopped was due to a power outage. Usually I check in periodically on MPH stats or MPH monitor for Android to make sure its still running.
Maybe upload a log file for mobileanarchy to have a look over?

Not sure what happened last time but I have since download and install a lightweight freeware called "Restart on crash" to take care of restarting Nicerminer if it detects the software not responding or not running.
Spoke too soon, it crashed again today.

Depending on your setup there is an option is an setting to 'run script when CUDA GPU is lost'. I've never used it but you could give that a try.

I already have it run script when CUDA GPU is lost, the PC should be restarted automatically.

Quote from: mobileanarchy on June 05, 2018, 03:10:50 AM

You can give the newer version a try:

Release 0.5.2 - 2018-06-05
Updated to sync with NHML v1.9.0.3
Bundled ethminer 0.14.0 which provides better performance and stability for CUDA devices.
You can still use the "original" version if you like. Benchmark both, and see what works best for you.

Download NicerMiner v0.5.2:
https://github.com/odedolive/NicerMiner/raw/master/releases/NicerMiner%200.5.2.zip

The new ethminer version should provide better performance and stability over the one shipped with NHML.
Give it a try and let me know.

Cheers.

Thank you for the new update. Downloaded and replaced the previous version, running benchmark now.
As for the new ethminer, will it automatically selected or is there a setting to disable genoil's?
In my benchmark window, I can really scroll down or uncheck anything from the list.

[UPDATE]
The new ethminer started and working. Although I'd like to report that it often restarted itself (nothing in the log) and on Nicer Miner window, there are no rate stats for mining ethereum.
See screenshot below, taken after it restarted itself.

log.txt

Code:

[2018-06-05 17:23:17] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:22] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port
[2018-06-05 17:23:22] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:27] [INFO] [SOCKET] Sending data: {"method":"devices.status","devices":[[0,"AMD A6-9500 RADEON R5, 8 COMPUTE CORES 2C+6G",2,100,-1,-1],[1,"ASUS GeForce GTX 1060 6GB",5,96,55,636],[2,"ASUS GeForce GTX 1060 6GB",5,90,54,683],[3,"ASUS GeForce GTX 1060 6GB",5,86,57,893],[4,"ASUS GeForce GTX 1060 6GB",5,88,57,893],[5,"Gigabyte GeForce GTX 1060 6GB",5,50,64,1242],[6,"Zotac GeForce GTX 1060 6GB",5,48,65,1092]]}
[2018-06-05 17:23:27] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port
[2018-06-05 17:23:27] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:32] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port
[2018-06-05 17:23:32] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:34] [INFO] [SOCKET] Received: {"method":"sma","data":[[5,"0.00019501"],[7,"0"],[8,"0.17961062"],[14,"0.00676628"],[20,"0.00646317"],[21,"0.00000208"],[22,"5.08592119"],[23,"0.00001398"],[24,"383.56251558"],[25,"0.00001063"],[26,"0.00034493"],[27,"0.00000054"],[28,"0.00000701"],[29,"0.00533545"],[30,"218.92779713"],[31,"262.7798555"],[32,"0.09851414"]],"stable":"[8,14,20,24,30]"}

log1.txt

Code:

[2018-06-05 17:23:02] [INFO] [MiningSession] Current Global profit: 6.83028288 USD/Day
[2018-06-05 17:23:02] [INFO] [MiningSession] Current Global profit: IS PROFITABLE MinProfit mine always regardless of profit
[2018-06-05 17:23:02] [INFO] [MiningSession] PrevStateProfit 0.00090189511052583, CurrentProfit 0.000917321328
[2018-06-05 17:23:02] [INFO] [MiningSession] Will NOT switch profit diff is 0.0171042256401369, current threshold 0.05
[2018-06-05 17:23:02] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port
[2018-06-05 17:23:02] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:04] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Cooling UP, cool time is 80000 ms
[2018-06-05 17:23:07] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port
[2018-06-05 17:23:07] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:12] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port
[2018-06-05 17:23:12] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] GetSummary returned null..
[2018-06-05 17:23:17] [INFO] [MinerEtherumCUDALatest-MINER_ID(0)-DEVICE_IDs(0,1,2,3)] [pid(4072)|bin(bin_nicerminer\ethminer-0.14.0\ethminer.exe)] Could not read data from API bind port

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.1 - MPH mining app based on NHML v1.9.0.2

astronyu

on 04/06/2018, 17:36:12 UTC

Quote from: mobileanarchy on June 04, 2018, 05:00:40 PM

I can try to bundle the new version with the app, and whenever the underlying code is trying to use Ethminer, just point it at the new version.
I'll have to test it of course.
I have GeForce GTX 1060 6GB on my dev machine, so I can test Ethminer myself using this configuration.

Many thanks!

One other thing, is this behavior normal? I thought the mining windows were supposed to be closed when switching also, seems the ethminer didn't get the memo.

Post

Topic

Board Mining (Altcoins)

Re: [ANN] NicerMiner 0.5.1 - MPH mining app based on NHML v1.9.0.2

astronyu

on 04/06/2018, 14:26:26 UTC

I have memory issue a lot with Genoil Ethminer. Claymore is running fine mining both Ethereum and Keccak but ethminer often crashed.
after a while, nicerminer itself crashed.

Is there a way to replace bundled ethminer with this version manually?
https://github.com/ethereum-mining/ethminer/releases

I tried replacing ethminer.exe with the github version the mining windows closed as soon as it opened.

Code:

Genoil's ethminer 0.9.41-genoil-1.1.5-nicehash-1.1.2
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_

Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d

Found suitable CUDA device [GeForce GTX 1060 6GB] with 6442450944 bytes of GPU memory
Benchmarking on platform: CUDA
Preparing DAG for block #57164
i 07:28:22|cudaminer0 set work; seed: #290decd9, target: #000000000000
i 07:28:22|cudaminer0 Initialising miner...
Warming up...
Generating DAG seed 290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e563
Using device: GeForce GTX 1060 6GB (Compute 6.1) THREADS=128 BLOCKS=8192
Generating DAG for GPU #2
Generate DAG device CUDA#2: 0%
Cuda error in func 'ethash_generate_dag' at line 129 : an illegal memory access was encountered.
Generate DAG device CUDA#2: 6%
Generate DAG device CUDA#2: 12%
Generate DAG device CUDA#2: 18%
Generate DAG device CUDA#2: 24%
Generate DAG device CUDA#2: 29%
Generate DAG device CUDA#2: 35%
Generate DAG device CUDA#2: 41%
Generate DAG device CUDA#2: 47%
Generate DAG device CUDA#2: 53%
Genoil's ethminer 0.9.41-genoil-1.1.5-nicehash-1.1.2
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_

Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d

Found suitable CUDA device [GeForce GTX 1060 6GB] with 6442450944 bytes of GPU memory
Benchmarking on platform: CUDA
Preparing DAG for block #57165
Warming up...
i 08:03:18|cudaminer0 set work; seed: #290decd9, target: #000000000000
i 08:03:18|cudaminer0 Initialising miner...
Generating DAG seed 290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e563
Using device: GeForce GTX 1060 6GB (Compute 6.1) THREADS=128 BLOCKS=8192
Generating DAG for GPU #2
Generate DAG device CUDA#2: 0%
Generate DAG device CUDA#2: 6%
Generate DAG device CUDA#2: 12%
Generate DAG device CUDA#2: 18%
Generate DAG device CUDA#2: 24%
Generate DAG device CUDA#2: 29%
Generate DAG device CUDA#2: 35%
Generate DAG device CUDA#2: 41%
Generate DAG device CUDA#2: 47%
Generate DAG device CUDA#2: 53%
Generate DAG device CUDA#2: 59%
Generate DAG device CUDA#2: 65%
Generate DAG device CUDA#2: 71%
Generate DAG device CUDA#2: 76%
Generate DAG device CUDA#2: 82%
Generate DAG device CUDA#2: 88%
Generate DAG device CUDA#2: 94%
Copying DAG from GPU #2 to host
Trial 1... 14889779
Trial 2... 14994636
Trial 3... 14889779
Trial 4... 14994636
Trial 5... 14889779
min/mean/max: 14889779/14931721/14994636 H/s
Genoil's ethminer 0.9.41-genoil-1.1.5-nicehash-1.1.2
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_

Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d

Found suitable CUDA device [GeForce GTX 1060 6GB] with 6442450944 bytes of GPU memory
Benchmarking on platform: CUDA
Preparing DAG for block #57209
i 02:20:31|cudaminer0 set work; seed: #290decd9, target: #000000000000
i 02:20:31|cudaminer0 Initialising miner...
Warming up...
Generating DAG seed 290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e563
Using device: GeForce GTX 1060 6GB (Compute 6.1) THREADS=128 BLOCKS=8192
Generating DAG for GPU #2
Generate DAG device CUDA#2: 0%
Generate DAG device CUDA#2: 6%
Generate DAG device CUDA#2: 12%
Generate DAG device CUDA#2: 18%
Generate DAG device CUDA#2: 24%
Cuda error in func 'ethash_generate_dag' at line 129 : an illegal memory access was encountered.
Genoil's ethminer 0.9.41-genoil-1.1.5-nicehash-1.1.2
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_

Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d

Found suitable CUDA device [GeForce GTX 1060 6GB] with 6442450944 bytes of GPU memory
Benchmarking on platform: CUDA
Preparing DAG for block #57126
Warming up...
i 02:41:14|cudaminer0 set work; seed: #290decd9, target: #000000000000
i 02:41:14|cudaminer0 Initialising miner...
Generating DAG seed 290decd9548b62a8d60345a988386fc84ba6bc95484008f6362f93160ef3e563
Using device: GeForce GTX 1060 6GB (Compute 6.1) THREADS=128 BLOCKS=8192
Generating DAG for GPU #2
Generate DAG device CUDA#2: 0%
Generate DAG device CUDA#2: 6%
Generate DAG device CUDA#2: 12%
Generate DAG device CUDA#2: 18%
Generate DAG device CUDA#2: 24%
Generate DAG device CUDA#2: 29%
Generate DAG device CUDA#2: 35%
Generate DAG device CUDA#2: 41%
Generate DAG device CUDA#2: 47%
Generate DAG device CUDA#2: 53%
Generate DAG device CUDA#2: 59%
Generate DAG device CUDA#2: 65%
Generate DAG device CUDA#2: 71%
Generate DAG device CUDA#2: 76%
Generate DAG device CUDA#2: 82%
Generate DAG device CUDA#2: 88%
Generate DAG device CUDA#2: 94%
Copying DAG from GPU #2 to host
Trial 1... 20447232
Trial 2... 20237516
Trial 3... 20342374
Trial 4... 20447232
Trial 5... 20237516
min/mean/max: 20237516/20342374/20447232 H/s
inner mean: 13596535 H/s