Search content
Sort by
Showing 20 of 29 results by drmilos
Re: Cryptowatch - real-time charts and personalized trading analysis
It will be great if you can add at the top (or bottom) prices from few other major exchanges.
Name, then signal "^" or "v" in green or red and price.
For example:
Bitfinex v 254.68 | Bitstamp ^ 245.55 |
Tool is very useful and this can be an idea for improvement.
Name, then signal "^" or "v" in green or red and price.
For example:
Bitfinex v 254.68 | Bitstamp ^ 245.55 |
Tool is very useful and this can be an idea for improvement.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
I started to mine Particle 14.01 and till now I mined ~50k and still mining. It takes me more than one month to mine one block from beginning 
.
I will continue mining whatever reward will be in the future because I trust in this coin. Even it will fall to 45 coins.
.I will continue mining whatever reward will be in the future because I trust in this coin. Even it will fall to 45 coins.
You are true Particle-lover. It has impressed me. Always support Particle!
This is the way I look at this! Support the way you can till the end or don't support at all.
Out there are people holding millions of PRT mined in first few days even first hours and just looking at the price at exchanges, and waiting for something to happen to get hundreds of BTC or LTC at initial trades.
I really hope that my 50k will worth something in the future.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Please vote in the poll about the block reward increase:
http://forum.bitparticle.com/viewtopic.php?f=4&t=282
The poll runs for 5 days. You can only vote once but you can change your vote if you change your mind.
Thanks!
http://forum.bitparticle.com/viewtopic.php?f=4&t=282
The poll runs for 5 days. You can only vote once but you can change your vote if you change your mind.
Thanks!
I started to mine Particle 14.01 and till now I mined ~50k and still mining. It takes me more than one month to mine one block from beginning
.I will continue mining whatever reward will be in the future because I trust in this coin. Even it will fall to 45 coins.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Thanks for the info.
When I clicked the link above it says:
When this happens you run the wallet from a command prompt with the salvagewallet command (ie in windows C:> particle-qt.exe -salvagewallet). It takes a while but it recovers all the stuck sent transactions.
Ive found the particle-qt.exe file but when I click it, it just opens my wallet as usual. I dont know anything about computer programing so I would be very grateful if someone could explain to me in step by step layman terms how I use a command prompt and what and where the terminal is etc.?
When I clicked the link above it says:
When this happens you run the wallet from a command prompt with the salvagewallet command (ie in windows C:> particle-qt.exe -salvagewallet). It takes a while but it recovers all the stuck sent transactions.
Ive found the particle-qt.exe file but when I click it, it just opens my wallet as usual. I dont know anything about computer programing so I would be very grateful if someone could explain to me in step by step layman terms how I use a command prompt and what and where the terminal is etc.?
Click Start -> Run Type cmd, when command prompt is opened type "cd particle-qt.exe -salvagewallet"
You can find path by navigating to wallet exe from My computer and C or D and folder where wallet is.
For example: Start -> Run type cmd then cd C:\Users\User\Desktop\particle-qt-8.7.3 then type particle-qt.exe -salvagewallet where User in path is your logged on user.
If it is helped feel free
PphQ6A8Nxni8nrANYfrUdLCSn8LRhbvTYN
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
I don`t know what I did, but four times try to sent 500 PRT to address in new wallet, paid fee and after that paid 3000 PRT to friend without any problem.
Should I continue to mine with old address on https://www2.coinmine.pl/prt/index.php
Thank you all for your support.
Should I continue to mine with old address on https://www2.coinmine.pl/prt/index.php
Thank you all for your support.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Keep attempting to transfer an ever decreasing amount until you succesfully make a transfer and pay the fees when asked.
That is normal. If you cannot send the amount that you typed in, just lower the amount until you can send successfully.
So now you have the wallet you mined to and a newly created wallet (like a savings account) that you transferred coins from your mining wallet.
You can now or copy the mining wallet to somewhere safe.
You now create a NEW mining wallet. But I advise you as a newbie to not use P2Pool. I used https://www2.coinmine.pl/prt/index.php. I am very pleased with this pool
because you can set your automatic withdrawl amount to saw blocks of 500 PRT ( or another amount ).
That is normal. If you cannot send the amount that you typed in, just lower the amount until you can send successfully.
So now you have the wallet you mined to and a newly created wallet (like a savings account) that you transferred coins from your mining wallet.
You can now or copy the mining wallet to somewhere safe.
You now create a NEW mining wallet. But I advise you as a newbie to not use P2Pool. I used https://www2.coinmine.pl/prt/index.php. I am very pleased with this pool
because you can set your automatic withdrawl amount to saw blocks of 500 PRT ( or another amount ).
Will I have the same problem if I transfer amounts of 100 PRT or smaller to newly created wallet? Last time successfully transferred 500 PRT, but second time same error. Transaction too big
just try yourself.
If I withdraw additional 10K from https://www2.coinmine.pl/prt/index.php will this limit be increased? Is there any way that limit goes UP?
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Keep attempting to transfer an ever decreasing amount until you succesfully make a transfer and pay the fees when asked.
That is normal. If you cannot send the amount that you typed in, just lower the amount until you can send successfully.
So now you have the wallet you mined to and a newly created wallet (like a savings account) that you transferred coins from your mining wallet.
You can now or copy the mining wallet to somewhere safe.
You now create a NEW mining wallet. But I advise you as a newbie to not use P2Pool. I used https://www2.coinmine.pl/prt/index.php. I am very pleased with this pool
because you can set your automatic withdrawl amount to saw blocks of 500 PRT ( or another amount ).
That is normal. If you cannot send the amount that you typed in, just lower the amount until you can send successfully.
So now you have the wallet you mined to and a newly created wallet (like a savings account) that you transferred coins from your mining wallet.
You can now or copy the mining wallet to somewhere safe.
You now create a NEW mining wallet. But I advise you as a newbie to not use P2Pool. I used https://www2.coinmine.pl/prt/index.php. I am very pleased with this pool
because you can set your automatic withdrawl amount to saw blocks of 500 PRT ( or another amount ).
Will I have the same problem if I transfer amounts of 100 PRT or smaller to newly created wallet? Last time successfully transferred 500 PRT, but second time same error. Transaction too big
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
I am started to mine at the beginning on forkpool.com where amounts received goes up to 1-20 PRT.
Few weeks ago I switched on prt.coinine.pl and few times received 1000 with manual cash out and yesterday I made auto payment threshold on 9000 which is received normally. With that username I am mining with two friends and splitting received PRT-s on three parts. Successfully made one transaction of 3000 PRT to one friend and two of 1000 PRT to other. After that other 1000 I can`t transfer .
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
When I have had that problem it was when I was using P2Pool to mine.
All I did was send the coins in ever decreasing amounts to a newly created wallet until it was all gone.
When it was all transferred ( and no new payments were coming in ) I deleted that wallet.dat, restarted the qt and started to use a fresh
wallet.dat.
When using P2Pools I make transfers to a new wallet at 100 coins. It's tedious but simple to do.
So you say to tansfer 29000 PRT (this is how much I have) 100 by 100 to new wallet created on other client computer and then delete wallet.dat start qt and and transfer 29000PRT at once to a new wallet?
Transfer as much as you can at each iteration so if you can only do 10000 first time, 2000 second time, 1000 third time etc etc... (amounts will be different).
When you create the new wallet and you have lets say 100 coins accumulated, you transfer that to another address. Then, when the new wallet it fills to 100 coins again, you transfer etc...
As a newbie to crypto currencies at all and mining also , I am not 100% sure that I understood what did you said. I successfully transferred 500 PRT but I can`t do it again. I am asked to pay fee for transaction.
Is there any lowest limit (amounts going only down)? In this way I will have 0.00000x after 50-100 iterations and 29000 PRT left.
Is there any easiest way to fix this? Some kind of "reset" or something simmilar?
Thanks in advance.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
I am started to mine at the beginning on forkpool.com where amounts received goes up to 1-20 PRT.
Few weeks ago I switched on prt.coinine.pl and few times received 1000 with manual cash out and yesterday I made auto payment threshold on 9000 which is received normally. With that username I am mining with two friends and splitting received PRT-s on three parts. Successfully made one transaction of 3000 PRT to one friend and two of 1000 PRT to other. After that other 1000 I can`t transfer .
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
When I have had that problem it was when I was using P2Pool to mine.
All I did was send the coins in ever decreasing amounts to a newly created wallet until it was all gone.
When it was all transferred ( and no new payments were coming in ) I deleted that wallet.dat, restarted the qt and started to use a fresh
wallet.dat.
When using P2Pools I make transfers to a new wallet at 100 coins. It's tedious but simple to do.
So you say to tansfer 29000 PRT (this is how much I have) 100 by 100 to new wallet created on other client computer and then delete wallet.dat start qt and and transfer 29000PRT at once to a new wallet?
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
I am started to mine at the beginning on forkpool.com where amounts received goes up to 1-20 PRT.
Few weeks ago I switched on prt.coinine.pl and few times received 1000 with manual cash out and yesterday I made auto payment threshold on 9000 which is received normally. With that username I am mining with two friends and splitting received PRT-s on three parts. Successfully made one transaction of 3000 PRT to one friend and two of 1000 PRT to other. After that other 1000 I can`t transfer.
10:44:29 salvagewallet
10:44:29 Method not found (code -32601)
Anything that I missed?
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
When I have had that problem it was when I was using P2Pool to mine.
All I did was send the coins in ever decreasing amounts to a newly created wallet until it was all gone.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Anybody?Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Particle Error: Transaction too large.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Send coins: Error: Transaction creation failed!
Trying to send 3000 to friend. Same error msg. Tried to split it in 3 x 1000 first two success but on second I paid fee for transaction 0.0018 PRT and can`t finish third transaction of 1000.
Can anybody help me with this issue?
Particle version v0.8.7.3-g09e437b-beta
Thanks in advance.
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Thanks to somebody for 200 PRT
Date: 25.1.2014 02:13
From: unknown
Credit: 200.00 PRT
Net amount: +200.00 PRT
Transaction ID: d80cc43c4668a4ab4ff89266ee8f5f3a2e4718ed1473d146f81ef3669941bff0
Date: 25.1.2014 02:13
From: unknown
Credit: 200.00 PRT
Net amount: +200.00 PRT
Transaction ID: d80cc43c4668a4ab4ff89266ee8f5f3a2e4718ed1473d146f81ef3669941bff0
This is more than my daily mining capacity. I really appreciate donations.
Thanks once more
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Thanks to somebody for 200 PRT
Date: 25.1.2014 02:13
From: unknown
Credit: 200.00 PRT
Net amount: +200.00 PRT
Transaction ID: d80cc43c4668a4ab4ff89266ee8f5f3a2e4718ed1473d146f81ef3669941bff0
Date: 25.1.2014 02:13
From: unknown
Credit: 200.00 PRT
Net amount: +200.00 PRT
Transaction ID: d80cc43c4668a4ab4ff89266ee8f5f3a2e4718ed1473d146f81ef3669941bff0
Re: [ANN][PRT] Particle | CPU/GPU, Fast, Easy Mine, * NO PREMINE * | Official Thread
Hype!
#24
24 Particle $ 2,275,807 $ 0.0033 690,430,465 PRT $ 22,144
Re: [GIVEAWAY][PRT] Particle • 800-1200 PRT • More than 200000 PRT to share!
Particle Wave #9 °º¤ø,¸¸,ø¤º°`°º¤ø,¸,ø¤°º¤ø,¸¸,ø¤º°`°º¤ø,¸
drmilos +800 PRT @ PphQ6A8Nxni8nrANYfrUdLCSn8LRhbvTYN
265bbb68cee8f9c5c8a22012bd0ed796525e851544964a80a4d116f79c95e524
Left to give away: 158799.9708 PRT | Donate: PdNhKN1vcuk4X1csUtbtcx9s1GwkkfzNRm | Oficial Particle Thread
drmilos +800 PRT @ PphQ6A8Nxni8nrANYfrUdLCSn8LRhbvTYN
265bbb68cee8f9c5c8a22012bd0ed796525e851544964a80a4d116f79c95e524
Left to give away: 158799.9708 PRT | Donate: PdNhKN1vcuk4X1csUtbtcx9s1GwkkfzNRm | Oficial Particle Thread
Thank you