Search content
Sort by
Showing 20 of 27 results by kalen37
У меня раньше были такие состояния. По Радуге выходил так. Делается это под утро, пытаешься выйти из тела - и бац выходишь. Я из окна сразу прыгал или иногда спускался по лестнице. Причем оказывался в доме из детства, хотя мог уже быть в другом месте. Сейчас уже такое давно не практиковал.
А потом кричал - проснись, проснись?Есть книги по методике проникновения в сон, эта тематика хорошо раскрыта в фильме "Начало" Нолана. Один мой знакомый тренировал данную методику, за 3 года он смог несколько раз побывать на 3 уровне сна, что считается очень редким явлением. Но перестал практиковать, так как это стало становится смыслом жизни. Если будете пробовать - осторожнее.
Слушай у собак тоже есть сон, и по ихним признакам видно что они что то испитивають, те признаки ярко выражены. Что дальше? Что ты хочешь получить от сна?Ну их нафиг! Когда-то увлекался Кастанедой, пытался руки во сне увидеть - не получалось. А потом во время болезни несколько раз получались разные вещи - и после каждого раза весь день ходишь с ощущением, как будто не проснулся. Был очень рад, когда эти глюки закончились и больше не пытался.
Во время дискомфорта(к примеру болезнь, переутомление,) чаще всего появляется подобная фантазия во сне.
А из тела кто-то выходил? Это что-то наподобие выхода в Осознанный Сон, только вроде бы еще мощнее и ярче. У меня так еще пока не получалось.
Re: [ANN] Miner Control 1.4.2 - Auto profit switching miner controller
howdy all, me again.
Thanks to all of you who were helping me with my noobness.
So far it looks like my issue wasn't with mining but nvlddmkm.sys issues. Didn't have them when I was using my 560TI but my 760 seems to have a problem with it. Still trying to fix it but I'm still trying to figure out if it's the card or 344.11 driver.
Thanks to all of you who were helping me with my noobness.
So far it looks like my issue wasn't with mining but nvlddmkm.sys issues. Didn't have them when I was using my 560TI but my 760 seems to have a problem with it. Still trying to fix it but I'm still trying to figure out if it's the card or 344.11 driver.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
OK, so last night I brought up precision. Made sure the priority was set to 80 degrees, that's well within EVGAs stated heat threshold.
Launched the batch file and watched it mine whle having precision right next to it to watch the temps. Precision got to about 61 degree's before system crashed to purple. Tried 4 times, system is still down.....grrrrr
Is you card plugged into the mobo or do you use risers ? Launched the batch file and watched it mine whle having precision right next to it to watch the temps. Precision got to about 61 degree's before system crashed to purple. Tried 4 times, system is still down.....grrrrr
(I don't know much about purple crash... but bad riser will make your system crashes for sure...)
What are you mining by the way ?
video card plugs directly into the PCIe slot
on the .bat file I'm just mining X11.
Does windows give a reason for the crash ?
I wish
Computer crashes, when I reboot everything boots fine until you get to the desktop, it never appears. Just a purple screen. Unfortunately I'm not at that PC and was unable to revive it from the last crash. But I remember something about a failover occuring. I'll try again tonight and write it down.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
OK, so last night I brought up precision. Made sure the priority was set to 80 degrees, that's well within EVGAs stated heat threshold.
Launched the batch file and watched it mine whle having precision right next to it to watch the temps. Precision got to about 61 degree's before system crashed to purple. Tried 4 times, system is still down.....grrrrr
Is you card plugged into the mobo or do you use risers ? Launched the batch file and watched it mine whle having precision right next to it to watch the temps. Precision got to about 61 degree's before system crashed to purple. Tried 4 times, system is still down.....grrrrr
(I don't know much about purple crash... but bad riser will make your system crashes for sure...)
What are you mining by the way ?
video card plugs directly into the PCIe slot
on the .bat file I'm just mining X11.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
OK, so last night I brought up precision. Made sure the priority was set to 80 degrees, that's well within EVGAs stated heat threshold.
Launched the batch file and watched it mine whle having precision right next to it to watch the temps. Precision got to about 61 degree's before system crashed to purple. Tried 4 times, system is still down.....grrrrr
Launched the batch file and watched it mine whle having precision right next to it to watch the temps. Precision got to about 61 degree's before system crashed to purple. Tried 4 times, system is still down.....grrrrr
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
************ccminer for nvidia GPUs by djm34************
then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
can you put here exactly what there is in your bat, when it exits with this kind of message it means, it didn't recognize the algo you entered (picking up the default heavycoin)then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
https://www.dropbox.com/s/v9d54b9movp6axc/Screenshot%202014-10-15%2017.04.56.png?dl=0
bat file:
@echo off
ccminer.exe
pause
And where do you tell to ccminer where to mine and what to mine in your bat ?
line should be like this: ccminer.exe -r 3 -R 5 --algo=x11 -o stratum+tcp://eu.wafflepool.com:3331 -u yourlogin -p yourPassword
I hope you'll figure out rapidly how to copy and paste the line I (or Zels) gave you so we can move on... but my guess would be a problem related to miner control (or the operator
)operator error it is. I'm a newb, so figures.
New problem. So I built the .bat correctly as per y'all instructions, hash rate between 1700 and 2100. After about 6 messages my whole system crashes. And I'm not saying it shutdown or rebooted. It crashed, I had to use system restore to get it back.
symptom: Computer bios boot runs, windows starts loading then goes to a kind of dark purple screen. Hard drive seems to think it's done. SO it sounds like something with the video card.
Any idea's what I need to modify to keep it from kaboom? vid = GTX 760 with 4G ram.
lol But in any case, do try to maximize the amount of air your system gets, to keep it cool.This is actually my experiment to see if I want to put together a seperate mining machine. If I build a dedicated mining machine I've seen people suggest building it in a pair of old milk crates.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
Do you use any tools to overclock your graphic card like evga precision or msi afterburner? If yes, try to lower/disable overclock and try again.
If not, you can try to monitor temp of you graphic card with msi afterburner (without overcloaking) and see if temps is raising really fast when you try ccminer.
Else found this on google with purple screen on boot: http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-shows-a-blinking-purple-screen-after/0babde4b-c070-4976-a7c0-c073207ba194 http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-shows-a-blinking-purple-screen-after/0babde4b-c070-4976-a7c0-c073207ba194 it's on windows 8, but user found that without avast problem was solved. Perhaps somethings you can try
If nothing work, a clean install of windows/reinstal of updated driver is the last solution ^^
If not, you can try to monitor temp of you graphic card with msi afterburner (without overcloaking) and see if temps is raising really fast when you try ccminer.
Else found this on google with purple screen on boot: http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-shows-a-blinking-purple-screen-after/0babde4b-c070-4976-a7c0-c073207ba194 http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-shows-a-blinking-purple-screen-after/0babde4b-c070-4976-a7c0-c073207ba194 it's on windows 8, but user found that without avast problem was solved. Perhaps somethings you can try
If nothing work, a clean install of windows/reinstal of updated driver is the last solution ^^
Avast you say? I have avast on my PC.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
************ccminer for nvidia GPUs by djm34************
then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
can you put here exactly what there is in your bat, when it exits with this kind of message it means, it didn't recognize the algo you entered (picking up the default heavycoin)then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
https://www.dropbox.com/s/v9d54b9movp6axc/Screenshot%202014-10-15%2017.04.56.png?dl=0
bat file:
@echo off
ccminer.exe
pause
And where do you tell to ccminer where to mine and what to mine in your bat ?
line should be like this: ccminer.exe -r 3 -R 5 --algo=x11 -o stratum+tcp://eu.wafflepool.com:3331 -u yourlogin -p yourPassword
I hope you'll figure out rapidly how to copy and paste the line I (or Zels) gave you so we can move on... but my guess would be a problem related to miner control (or the operator
)operator error it is. I'm a newb, so figures.
New problem. So I built the .bat correctly as per y'all instructions, hash rate between 1700 and 2100. After about 6 messages my whole system crashes. And I'm not saying it shutdown or rebooted. It crashed, I had to use system restore to get it back.
symptom: Computer bios boot runs, windows starts loading then goes to a kind of dark purple screen. Hard drive seems to think it's done. SO it sounds like something with the video card.
Any idea's what I need to modify to keep it from kaboom? vid = GTX 760 with 4G ram.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
************ccminer for nvidia GPUs by djm34************
then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
can you put here exactly what there is in your bat, when it exits with this kind of message it means, it didn't recognize the algo you entered (picking up the default heavycoin)then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
[/quote]
https://www.dropbox.com/s/v9d54b9movp6axc/Screenshot%202014-10-15%2017.04.56.png?dl=0
bat file:
@echo off
ccminer.exe
pause
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
I really wish the various authors working to improve ccminer/nvminer would get together and put their work into a github repository so that we could move towards a single source tree again.
Yeah, that would be the most efficient way to manage it. 
OK. I downloaded djm's latest version and dropped it in the miner control folder. Minercontrol launches and seems to run but once again ccminer doesn't launch. Could you please link the thread you're speaking of so I can try and figure out what I hosed?
Thanks
* original by Christian Buchner, then some of us try to add new things to it at a time where he didn't feel continuing developping for ccminer.
Most of everything algo from christian and newer algo can be found in my release ghitub/djm34.
The only algo which isn't part of my release is the one developped by tsiv for cryptonote mining.
So there is mostly 2 rep. So I am not sure about what you are complaining... especially when you never showed up on our thread to ask for anything (this is so true, that I didn't know at all of your minercontrol...
Now if you have special needs to ask to ccminer devs (with a s). better post on ccminer thread rather than complaining here (about how we manage stuff) on your thread which I never read until now.
djm, that's a little brusque.
I haven't been following the ccminer thread too closely the last couple of months but for a while I did see that several people were working independently on ccminer (doing great things) and a couple of people were then trying to merge together the best of each work into a unified product. A little haphazard but it was still making progress. That was the source of my musing that a single github repository would be a nice baseline for continuing to improve ccminer being that cbuchner has moved on to other things. If your branch is now the most complete then hopefully others will submit pull requests to you rather than forking and releasing even more variants. I'll probably try switching over to it myself soon as the latest version of nvminer I'm using is experiencing occasional crashes that I wasn't seeing before.
As for kalen37, a couple of us here directed him towards the ccminer thread being that the problem he is experiencing appears to be ccminer related and nothing to do with Miner Control. I had him try launching ccminer from a batch file a few days ago to get Miner Control completely out of the equation and he still had the same problem with it not starting up correctly. At that point it became apparent he would likely get better help on the ccminer thread.
Miner Control is generic and not dependent on ccminer or any other specific miner program. It is just a tool to launch whichever miner someone chooses to configure under it. The releases don't even have a real miner bundled in, just a fake one used to demonstrate how to configure the program.
Good luck with your continuing work on ccminer.
Regarding works in ccminer. I must say first that it is a nice platform to implement new algorithm, so people interested and this or that will use ccminer to implement xmr miner or else.
It has never been clear to me that tsiv wanted to have his work included in a release or else. On a different approach Cayars released nvminer to include everything related to nvidia miner (but didn't released the source...).
So all this is due to the presence of several developpers using ccminer more as a developpement platform than a mean to put everything togother... which I don't think has ever been the finality...
Well I posted I was using minercontrol (Version 1.3) and using your CCMINER M7V7. Not sure what else you would need? When I get home I will post the error messages.
As to my previous post not sure why you would get angry about it? The crack about over a thousand pages being rather difficult to use for troubleshooting was a general comment.
I'm using a GTX 760 4G of ram.
I didn't get angry, but you post a message telling basically it doesn't work without giving any information which could be used to help you.
(and it isn't even clear in your message if ccminer crashes or run without mining.... (which may happen in case it can't connect to a pool)
First, try to run ccminer alone mining what you would mine with minercontrol (may-be Miner Control is controlling too many thing, if you don't know what you are mining...) or just tell us what you want to mine so we can tell you how to run ccminer.
Once you have done that then you can try to see what happen with miner control
For tip about running ccminer check cudamining.co.uk site.
I'm sorry, but what I'm using and what I'm mining are 2 different questions. Above I stated what I was using. What I'm mining is X11,X13,X15 and NIST5.
CCMINER doesn't even seem to start, if it does it opens and closes faster then I blink. Above that there are no other indications
and what I posted originally "Minercontrol launches and seems to run but once again ccminer doesn't launch" That's all I can tell you. The only thing else I can do is post the errors from the log, which I will do as soon as I get home.
When I get home I also build another batch file and see what happens when I start it and pause.
eg for x13: Release\ccminer -a x13 -s 2 -o stratum+tcp://dig.minep.it:3369 -u tpruvot.x13 -p minepit
(with the pool you prefer and your username and password...)
OK, ran ccminer by itself. It launches and disappears. Made a .bat file with a pause and the windoiw starts with ************ccminer for nvidia GPUs by djm34************
then the usual stuff and donation address.
then
ccminer.exe: Heavycoin hash requires block reward vote parameter (see --vote)
will try and figure out how to do what you're requesting above,.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
I really wish the various authors working to improve ccminer/nvminer would get together and put their work into a github repository so that we could move towards a single source tree again.
Yeah, that would be the most efficient way to manage it. OK. I downloaded djm's latest version and dropped it in the miner control folder. Minercontrol launches and seems to run but once again ccminer doesn't launch. Could you please link the thread you're speaking of so I can try and figure out what I hosed?
Thanks
* original by Christian Buchner, then some of us try to add new things to it at a time where he didn't feel continuing developping for ccminer.
Most of everything algo from christian and newer algo can be found in my release ghitub/djm34.
The only algo which isn't part of my release is the one developped by tsiv for cryptonote mining.
So there is mostly 2 rep. So I am not sure about what you are complaining... especially when you never showed up on our thread to ask for anything (this is so true, that I didn't know at all of your minercontrol...
Now if you have special needs to ask to ccminer devs (with a s). better post on ccminer thread rather than complaining here (about how we manage stuff) on your thread which I never read until now.
djm, that's a little brusque.
I haven't been following the ccminer thread too closely the last couple of months but for a while I did see that several people were working independently on ccminer (doing great things) and a couple of people were then trying to merge together the best of each work into a unified product. A little haphazard but it was still making progress. That was the source of my musing that a single github repository would be a nice baseline for continuing to improve ccminer being that cbuchner has moved on to other things. If your branch is now the most complete then hopefully others will submit pull requests to you rather than forking and releasing even more variants. I'll probably try switching over to it myself soon as the latest version of nvminer I'm using is experiencing occasional crashes that I wasn't seeing before.
As for kalen37, a couple of us here directed him towards the ccminer thread being that the problem he is experiencing appears to be ccminer related and nothing to do with Miner Control. I had him try launching ccminer from a batch file a few days ago to get Miner Control completely out of the equation and he still had the same problem with it not starting up correctly. At that point it became apparent he would likely get better help on the ccminer thread.
Miner Control is generic and not dependent on ccminer or any other specific miner program. It is just a tool to launch whichever miner someone chooses to configure under it. The releases don't even have a real miner bundled in, just a fake one used to demonstrate how to configure the program.
Good luck with your continuing work on ccminer.
Regarding works in ccminer. I must say first that it is a nice platform to implement new algorithm, so people interested and this or that will use ccminer to implement xmr miner or else.
It has never been clear to me that tsiv wanted to have his work included in a release or else. On a different approach Cayars released nvminer to include everything related to nvidia miner (but didn't released the source...).
So all this is due to the presence of several developpers using ccminer more as a developpement platform than a mean to put everything togother... which I don't think has ever been the finality...
Well I posted I was using minercontrol (Version 1.3) and using your CCMINER M7V7. Not sure what else you would need? When I get home I will post the error messages.
As to my previous post not sure why you would get angry about it? The crack about over a thousand pages being rather difficult to use for troubleshooting was a general comment.
I'm using a GTX 760 4G of ram.
I didn't get angry, but you post a message telling basically it doesn't work without giving any information which could be used to help you.
(and it isn't even clear in your message if ccminer crashes or run without mining.... (which may happen in case it can't connect to a pool)
First, try to run ccminer alone mining what you would mine with minercontrol (may-be Miner Control is controlling too many thing, if you don't know what you are mining...) or just tell us what you want to mine so we can tell you how to run ccminer.
Once you have done that then you can try to see what happen with miner control
For tip about running ccminer check cudamining.co.uk site.
I'm sorry, but what I'm using and what I'm mining are 2 different questions. Above I stated what I was using. What I'm mining is X11,X13,X15 and NIST5.
CCMINER doesn't even seem to start, if it does it opens and closes faster then I blink. Above that there are no other indications
and what I posted originally "Minercontrol launches and seems to run but once again ccminer doesn't launch" That's all I can tell you. The only thing else I can do is post the errors from the log, which I will do as soon as I get home.
When I get home I also build another batch file and see what happens when I start it and pause.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
I really wish the various authors working to improve ccminer/nvminer would get together and put their work into a github repository so that we could move towards a single source tree again.
Yeah, that would be the most efficient way to manage it. OK. I downloaded djm's latest version and dropped it in the miner control folder. Minercontrol launches and seems to run but once again ccminer doesn't launch. Could you please link the thread you're speaking of so I can try and figure out what I hosed?
Thanks
* original by Christian Buchner, then some of us try to add new things to it at a time where he didn't feel continuing developping for ccminer.
Most of everything algo from christian and newer algo can be found in my release ghitub/djm34.
The only algo which isn't part of my release is the one developped by tsiv for cryptonote mining.
So there is mostly 2 rep. So I am not sure about what you are complaining... especially when you never showed up on our thread to ask for anything (this is so true, that I didn't know at all of your minercontrol...
Now if you have special needs to ask to ccminer devs (with a s). better post on ccminer thread rather than complaining here (about how we manage stuff) on your thread which I never read until now.
djm, that's a little brusque.
I haven't been following the ccminer thread too closely the last couple of months but for a while I did see that several people were working independently on ccminer (doing great things) and a couple of people were then trying to merge together the best of each work into a unified product. A little haphazard but it was still making progress. That was the source of my musing that a single github repository would be a nice baseline for continuing to improve ccminer being that cbuchner has moved on to other things. If your branch is now the most complete then hopefully others will submit pull requests to you rather than forking and releasing even more variants. I'll probably try switching over to it myself soon as the latest version of nvminer I'm using is experiencing occasional crashes that I wasn't seeing before.
As for kalen37, a couple of us here directed him towards the ccminer thread being that the problem he is experiencing appears to be ccminer related and nothing to do with Miner Control. I had him try launching ccminer from a batch file a few days ago to get Miner Control completely out of the equation and he still had the same problem with it not starting up correctly. At that point it became apparent he would likely get better help on the ccminer thread.
Miner Control is generic and not dependent on ccminer or any other specific miner program. It is just a tool to launch whichever miner someone chooses to configure under it. The releases don't even have a real miner bundled in, just a fake one used to demonstrate how to configure the program.
Good luck with your continuing work on ccminer.
Regarding works in ccminer. I must say first that it is a nice platform to implement new algorithm, so people interested and this or that will use ccminer to implement xmr miner or else.
It has never been clear to me that tsiv wanted to have his work included in a release or else. On a different approach Cayars released nvminer to include everything related to nvidia miner (but didn't released the source...).
So all this is due to the presence of several developpers using ccminer more as a developpement platform than a mean to put everything togother... which I don't think has ever been the finality...
Well I posted I was using minercontrol (Version 1.3) and using your CCMINER M7V7. Not sure what else you would need? When I get home I will post the error messages.
As to my previous post not sure why you would get angry about it? The crack about over a thousand pages being rather difficult to use for troubleshooting was a general comment.
I'm using a GTX 760 4G of ram.
Re: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]
evening all. Over a thousand pages, kind of hard to figure things out.
So., I'm new to all of this. I downloaded and setup minercontrol. I downloaded DJM's latest ccminer (M7V7app). Configured the conf file. Minercontrol launches and looks like I'm mining. But CCminer never launches. I wasn't sure which .dll files to include so I tried it with none and all, same result.
Any idea's?
So., I'm new to all of this. I downloaded and setup minercontrol. I downloaded DJM's latest ccminer (M7V7app). Configured the conf file. Minercontrol launches and looks like I'm mining. But CCminer never launches. I wasn't sure which .dll files to include so I tried it with none and all, same result.
Any idea's?
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
I really wish the various authors working to improve ccminer/nvminer would get together and put their work into a github repository so that we could move towards a single source tree again.
Yeah, that would be the most efficient way to manage it. OK. I downloaded djm's latest version and dropped it in the miner control folder. Minercontrol launches and seems to run but once again ccminer doesn't launch. Could you please link the thread you're speaking of so I can try and figure out what I hosed?
Thanks
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
Kalen, what numbers are you getting, what does the miner say? Do you get any yay's?
YAY's ?
CCminer won't launch. It's still doing the flash and then gone thing. When I use the batch file it's still has the heavy coin message. Just the minercontrol program is running.
ADD: OK, I just searched and found ccminer 1.44. Downloaded and added it to minercontrol folder with msvcr120.dll and now I'm back to ccminer not running and miner control showing "dead" status for everything.
CCMINER bat gives heavy coin error.
Get Nvminer v1.2U-D8 - 25-08-2014 here: http://cudamining.co.uk/url/releases
Working fine for x11, x13, x15, nist5.
I'm surprised that anyone using ccMiner doesn't check the main CUDAmining thread on this forum, or their website for the latest releases.Working fine for x11, x13, x15, nist5.
That's the one I've been using as well. I have a feeling that kalen is using a patched version of ccminer for heavycoin which is ignoring the algorithm selection and always trying to go with heavycoin. nvminer is the way to go if you are going to mine the algos above on an nVIDIA card.
Actually, djm's latest version of ccMiner has all the same optimizations as nvMiner, plus a slightly better averaging of your hashrate, and includes optimization for the M7 algorithm (which nvMiner doesn't support at all). If you want a "one-miner-fits-all" that still has all the speed of previous versions, then djm's M7 version of ccMiner is the way to go. Look through their thread to find it, unless djm has finally gotten around to uploading it to the CUDAmining website.And of course, once you start to get some income from your mining efforts, be sure to send a few coins their way. After all, you wouldn't be mining anything of value if it weren't for them writing the software you're using! (same goes for StuffOfInterest keep the donation mining turned on, so he gets rewarded for his work too)
EDIT: Yes, his M7 version is there, called m7v7, right at the top of the ccMiner list. That's the version I would recommend!
it might have something to do with the god awful amount of threads and pages of said threads. Nevermind I found it.
Hopefully it doesn't crash my system like nvminer did.
Re: [ANN] Miner Control 1.3.0 - Auto profit switching miner controller
Ok. Nvminer worked. But shortly after it was running my system crashed and doesn't seem to want to recover. Tried earlier restore point system disk. Any suggestions?