What happens if you plug them with the wires energized? When you plug the first and then the second.. I don't think this should be done, but given how some people operate their mines...
Next experiment; Would it turn on if you used two 120v from different phases (would it get the 208v from the two hots?). Theoretically speaking, of course, don't try this at home, in the name of science.
Yea i want to know, since it has two plugs, what happen if you plug directly one cable first to power point (the psu wont turn on?) and then the second cable (then the psu turn on?), so no need PDU switches.
Post
Topic
BoardHardware
Re: Bitmain introduces the Antminer S17 Pro, Antminer S17, and the Antminer T17
by
kodokbuduk
on 26/04/2019, 06:48:44 UTC
with 2 plugs, how you guys power up? any on/off switch on the psu?
Post
Topic
BoardHardware
Re: Bitmain introduces the Antminer S17 Pro, Antminer S17, and the Antminer T17
by
kodokbuduk
on 09/04/2019, 06:42:58 UTC
Same, better wait till 1.5k or less...
Post
Topic
BoardHardware
Re: Bitmain will be releasing S15 and T15 on 8/11/2018
My 2 miners missing 1 chain. I try to upgrade firmware with SD card but it didn't work. The red and green light didn't blink. Have anyone help everybody with youtube step by step. It's very helpful for friends. Bitmain said not clear about power on control board , plug or unplug cable with hashboard, offline or online with Lan.
How to run this miner with only 2 hashboards? since one was sent for repair. It keep looping "error" msg on mining status and wont hashing only using 2 hashboards. I cant update the firmware too (via WEB and SD card).
Followed all instructions provided by the Bitmain Support page to upgrade to latest firmware with SD flashing, but i wasn't able to flash the E3 somehow even i made it step by step as suggested.
Can someone that managed the flashing through SD card make a guide/tutorial step by step? Pretty sure the Bitmain guide misses something or it would have worked out, not?
Thx in advance.
It just does not work. Even Bitmain said, it does not work. The E3 was the worst miner so far.
So nobody managed to flash the SD card so far? Seriously?
So we need to use T9+ firmware first via SD card (flashed), then use E3 firmware on web?
Anyone has experience by updating the E3 firmware, it can fix the missing chain? i just dont get it. I think the hashboard has the problem (same as D3, missing chain cannot be fixed with updating the firmware).
Can anybody help me please? Why does my E3 not work at full capacity? I attached the photo. I do not understand the error "BB". https://ibb.co/cdjfYK
Hey, I got the same issue, I opened a ticket and the support told to send the faulty board to them (It was only one chain which has the BB error), now the miner is working at 130~140H/S, pictures below. I'm trying to get a free coupon from them to compensate for the missing days without the board but I know they will give nothing .
how you sent the board for repair? 1 hashboard has 6 asics boards on it (3 chains number ie 1,2,3 or 8,9,10 or 11,12,13). Mine is chain 11 is missing. One chain has 2 asics boards, so did you send whole 1 hashboard (6 asic boards)?