+1

It's comforting to see someone who knows what's up.

But the magical $ value you see in your mt.Gox account after selling BTC is worth $0 effectively, if you cannot take delivery of it. (i.e. wire transfer to your own bank account)

As vs3 stated... this ended up resolving itself.

I also have noticed the same...  for block #239957 I have "none" for shares/reward.  But it took about about 2.5 hours to find that block, so I will wait as vs3 suggested.

OS X 10.8.3 - upgrade from 0.8.2rc1

Launch attempt #1 - splash screen abruptly disappeared during "Verifying blocks..." and process became unresponsive.  Killed the process and tried again.

attempt #2 - Application loaded without any issue.

I will try to replicate the result from Attempt #1 and provide some debug output if possible.  Not ruling out it was a problem with the OS itself.

Has anyone attempted updating the fpga-controller firmware?

http://downloads.qi-hardware.com/people/xiangfu/avalon/fpga-controller/

README:
http://downloads.qi-hardware.com/people/xiangfu/avalon/fpga-controller/README

I'm reluctant to update at this point without any release notes/details on the changes with this new release.

It looks like purchasing of Gyft.com gift cards is not limited to Android phone users any more.

Gyft has now added the ability to purchase gift cards using Bitcoins directly from it's website:

http://www.gyft.com/
(Click the link reading "NEW! Buy cards with Bitcoin")

Direct link:
http://app.gyft.com/me/cards/purchase/

Update:  Thanks to xiangfu for making the necessary code changes and releasing a new build so quickly.  Fan speed is controlled by max of temp2 and temp3 now. 

This has been fixed as of version 20130408.

The Poll Question says it all-- Which OS will you run on the host computer for your BFL ASIC device?

Your feedback is highly valued.  Thanks for taking the time to participate.

BitSyncom,

Are there any plans to sell only the hashing modules?

Thanks.

spiccioli, check this section of the Avalon wiki page for a summary of changes:

https://en.bitcoin.it/wiki/Avalon#NEXT

BitSyncom, given the results posted above after performing the steps as you directed-- it appears there might be a problem with the Control Board.  Would it be possible for me to obtain replacement Control Board?

Thanks.

See [temp2] above after moving temp3 to P3.

It appears sensor is returning a value when plugged in to P3.

BitSyncom, what can be done to fix this?

Best,

xempew

Dear BitSyncom:

As directed, I moved temp3 to P3 and observed the following output in 'CGminer API log' after running for ~8 minutes:

[STATS0] =>
(
   ......
   [fan1] => 0
   [fan2] => 720
   [fan3] => 720
   [temp1] => 25
   [temp2] => 50
   [temp3] => 0
   ......
)

Thank you in advance for your time and assistance with troubleshooting this issue.

Best,

xempew

Sorry, I think you misunderstood what I'm trying to convey.  And also what BitSyncom said:

My understanding is as follows:  'temp1' is from sensor mounted to one of the air intake fans.  'temp2' is not currently used (-1 value).  and 'temp3' is from sensor affixed to a module heat-sink.

After scouring the forum for example copy/paste of stats from other users Avalon, and confirming with an additional Avalon user on IRC it seems evident there are 2 temp sensor values each being reported through 'temp1' and 'temp3', respectively.  I apologize for the earlier miscommunication, I was not trying to assert there should be 3 temperature values reported.

The issue with this particular Avalon unit I have, temp3 has a constant value of 0, and the fans always stay at ~700-800 rpm, even after hashing at ~66 GH/s for 20 mins+.  I have turned this unit off to prevent damage.

Picture of the sensor connection that was re-seated (with no change to the temp3 '0' readout) is below.

Thanks for your time and assistance, any suggestions would be greatly appreciated.

Why do other avalon units have temperature value output on temp1 and temp3?  This is the only unit that has a constant 0 for temp3 value. And fan rpm always stays at ~700-800 rpm.


By reading the forum (see quote below) and and confirming with eennaam on ##avalon also, temp1 and temp3 return value, and temp2 is -1.


temp3 should have non-zero value, according to this post, and user eennaam on IRC who confirmed as well.

Ioshia, what does your unit(s) return for temp1 and temp3?

I understand.  I did not unplug and plug to random connector.

I simply re-seated the sensor coming from the heatsink in the same socket/connector as I understand this is "temp3".

It is still reporting value of 0 always.  Any suggestion?

Updated/edited to provide some clarification on the issue.

I'm experiencing an issue where temp3 on the avalon unit always shows a value of 0.  Here is the relevant section from the 'Cgminer API Log':

[STATS0] =>
(
   ......
   [fan1] => 0
   [fan2] => 780
   [fan3] => 800
   [temp1] => 30
   [temp2] => -1
   [temp3] => 0
   ......
}

I understand only 2 temperature sensors are present, and reported via 'temp1' and 'temp3'.  temp2 is unused currently.

As you can see, the second temperature sensor 'temp3' is reporting constant 0 value.  When unit is hashing for 20+ minutes, fans stay at very low RPMs (~700-800).  This issue is unique to this one unit.  After scouring the forum, and confirming with one other Avalon user on IRC, it appears temp3 should also report non-zero value.  Is this wrong?

Any suggestions?  I am afraid to keep it running, as the fan speed stays very low and I do not think it is providing adequate cooling due to low temp3 sensor value.

Thanks.

Thanks nobbynobbynoob!

18q5m6vVxoGL5Y2mMNKH53rHpbdqqUzcLa