Quote from: Wolf0 on June 13, 2017, 07:06:09 AM

Quote from: Calrornds on June 13, 2017, 05:27:54 AM

Quote from: citronick on June 13, 2017, 05:18:00 AM

Quote from: Wolf0 on June 13, 2017, 04:54:17 AM

Quote from: Calrornds on June 13, 2017, 04:44:38 AM

Hi Everybody:

As a lot of messages I have seen here, I will start stating that I'm new here and new in mining, I started mining on friday, so far great, I have learnt a lot.

Right now I am mining with only 3 ASUS STRIX RX580 8GB OC, I have reduced the GPU clock in 5% and increased the memory clock speed to 2200 MHz, I have got 27.4 MH/s from 24.5MH/s, all this in AMDs Wattman, I had problems with the Asus Aura Light Effects, it seems it mess with the MH/s fluency, It is off and uninstalled now.

I have read about some widely known power adjustments, I understand the idea is to reduce voltage, so reduce power consumption, and increase memory clock speed, so increase MH/s, I have read too about doing it with AMDs Wattman or MSIs AfterBurner, and about bios flashing.

Knowing many has been able to get 29MH/s and 135 Watts of power from this cards, my questions so far are the following:

- There is need to flash a new bios to get the best performance?, if so, how many MH/s could I get?, or power reduction?.
- If I can get similar improvements with AMDs Wattman, which are the parameters I must use?.

Thank you very much for your support.

Carlos

If you're still using Windows (which is about as stable as a house of cards during a hurricane), then you can easily undervolt using MSI AB or whatever. Also, only 27.4MH/s? Those can't be Samsung, are they?

LOL.... "...If you're still using Windows (which is about as stable as a house of cards during a hurricane)..." ~ Wolf0, 2017

thanks for brief grin... needed one.... after the BTC bloodbath last night

27.5mh ~~-- standard 1500 straps -- maybe Elpida memory~~

possibly SK-Hynix... lucky card this

Use GPUZ to find out memory type

It seems I am Lucky, these are Samsung, just checked.

What I need to change?, which settings must I use?.

Thx very much,

Damn! I thought copy+paste hackjob from 1750 -> 2000 would do better than that on Samsung K4G80325FB. I figured at least 28.5MH/s (which still, for Samsung, is not good) but... wow.

Hi:

So far I have reduced Voltage -96 mV, increased GPU Clock Speed to 1400MHz and Memory Clock Speeds to 2200MHz, I keep reading about that 1750=>2000 "thing", I understand it can be done flashing the bios, so if I understand it ok, there is nothing else I can do to improve my MH/s but to flash the bios, 27.5MH/s is the Top I can get with AfterBurner?.

Thx very much,

Carlos