Some things to check.

- One of my rigs started using 3,5 GB of ram. Closed the miner and it dropped to the usual 420 Mb.
- On another rig one GPU dropped to 0 and another GPU dropped to 500 (RX 470 usually working at 750-770). Restarted the miner also.

Monero pool connection is unstable.

Got connection time out on half of my rigs.

XMR:  Stale share found - skip
XMR: Stratum - Cannot connect to europe.monero.miningpoolhub.com:20580
DevFee: XMR: Stratum - Failed to connect, retry in 20 sec...
GPU6 t=48C fan=32%
XMR: 10/02/17-01:56:09 - SHARE FOUND - (GPU 5)
Share accepted (797 ms)!
XMR: 10/02/17-01:56:13 - SHARE FOUND - (GPU 5)
DevFee: XMR: Stratum - connecting to 'europe.monero.miningpoolhub.com' <172.104.148.42> port 20580 (SSL/TLS)
Share accepted (1468 ms)!
XMR: Stratum - Cannot connect to europe.monero.miningpoolhub.com:20580
DevFee: XMR: Stratum - Failed to connect, retry in 20 sec...
GPU6 t=48C fan=42%
XMR: 10/02/17-01:56:40 - SHARE FOUND - (GPU 1)
Share accepted (3047 ms)!
DevFee: XMR: Stratum - connecting to 'europe.monero.miningpoolhub.com' <172.104.148.42> port 20580 (SSL/TLS)
GPU6 t=49C fan=43%
XMR: Stratum - Cannot connect to europe.monero.miningpoolhub.com:20580
DevFee: XMR: Stratum - Failed to connect, retry in 20 sec...

Around 52 Gb then..  Got it.

-h option is not working on my rigs. Tried 992 and 1000 on two of them.
Checked again.
It apeares that the rig didn't crash after all but it slowed down 99.9% and there wasn't anything moving. Minutes later one line with the temperature appeared on the miner window.

There are no other parameters. Just the pool address, the user, the password and the -h 992. So I could not be doing anything wrong.

GPU 2, GpuMiner dk2an0 failed -4

Managed to get rid of it setting the virtual memory to... 50 GB ?!?!?!?! 

What the hell are you doing with 50Gb ? Opening a a porn site ?

Some features still don't work and crashes the rig (GPU clock and setting the -h value).

Nice speed increase 10-20%

Think what will happen when China regulates btc...

I'm dropping from 0.34 yesterday to 0.24 0.22 xmr today.
The rigs are the same. Working 24/7...

I did. I should have 0.32xmr at least and I got 0.28xmr two days in a row.

I will probably get 0.34 xmr today since half of the day has past.
But I had a similar value some days back then dropped to 0.28 xmr

I have a similar problem in Monero.
Sometimes I get 0.32 XMR a day and the next couple of days with one more GPU mining and a optimization of some Kh/s on all the rigs I get only 0.28 XMR.
Any clue?

I have another question.
What is "(Shrunk accumulated Credit transactions)"?

I thought on doing that but I wasn't sure if you had a process running behind the top up process so I made a regular transaction. I'll try it next time. Thanks 
My mining pools usually make 1€ transactions and they don't take much time to arrive to you. Usually less then an hour. I know if the mempool is full it could take more. But I can always check its progress so I'm ok with it.

Some days back I tried 100€ again and it asked me for 8€. Then I added more 150€ in bitcoins to make the top up.
Then it asked me 17€ for 250€.
So I tried 200€ and it asked for 12€ and I made the transaction.

You should really check your code behind in calculating the fee it is very strange how it behaves.

Thanks Robert

Hi,

I'm mining Monero atm. And I was trying finding a better voltage for my cards and messing with Afterburner.
Since I couldn't drop bellow 1100 mv in some of my cards I decided to open Radeon configuration.
I went to the core voltage switched to manual and then changed the voltage. But it returned back to normal after some seconds.
I thought I would probably need to change the straps on the bios.

But then I switched the core voltage back to automatic the voltage switched to around 880-930 mV on my afterburner (I have my Afterburner open with -92).

All I had to do was, switch the Voltage to Manual, accept the change and then switch back to Automatic on all of my GPU and my rig dropped from 800 W to 600 W on the wall.

I tested on all my rigs and it worked in all of them without a crash.
I had some GPU that where overheating (74º) and dropped to 59º.
The hashrate stayed normal. I don't know if it can influence I was mining at the same time.

I really don't understand the science behind this and if it will stay after reboot but it works. 



Buy me a beer if this helped you somehow 32MfGxYASabgdMQDdwEAeUxQGMxYQAHxzi 

Usually it means that the User/Worker Name/Password/Email is wrong.

There is no information about what I asked.
They could receive in ETH then you need a fee to change to BTC and then another to change to EUR.

I had some problems with bad shares after the upgrade and had to increase the voltage to get rid of it in one GPU.
But didn't see a big wattage increase.

Probably you'll have to tune the GPU up again.

But there is a Beta version from AMD already fixing this.
Use the AMD clean up utility before installing new beta version.

There is no option to control the satoshi/byte in there.
Robert just told me I could change it when sending money to my card.


Where is that option?

You can move Ethereum to card directly or does the money has to be converted to bitcoins then to EUR with all the fees and waiting time of the Bitcoin?

That's what I imagined.
I mined in Nicehash as my first pool for some time and the hashrates were always bouncing from 60MHs to 140MHs.
They should check that also. It's a bit annoying.
Never the less they are one of the most profitable ways of mining.

I don't think that's a good idea. You could end up paying 20€ or more for a transaction (I'm been asked for that value on other places).
And for small miners it would be bad.

But they could make a option for users chose there transaction fee.

As a matter of fact I was going to ask you that question. I only see that option on the send money.
I can top up the card from here https://my.bitwala.com/bitcoin?

It would be a good solution. Where can I find my card address?

So the first UTXO fee costs 2.45€ and the second costs 15€...

I just talked to one of your competitors and they said:

They take there money on other fees like 1% on the transaction. If I would make a transaction of 5.000€ with them I would pay much more on there service but would pay much less if I make a 100€ transaction with you.

We have to know what are the rules of the game to make the best choices. And we won't trust our money to companies that hides things from us.

Your support has another explanation for this...
Glad I made few transactions.

I thought that also. But I'm a bit disappointed on them.
Check this screenshots.

The UTXO is 2.45€ before the transaction
http://farm5.staticflickr.com/4375/36382405330_7618705339_b.jpg

And then the UTXO is 18.5€ on the same transaction confirmation.
http://farm5.staticflickr.com/4351/36640348341_f81c753d19_b.jpg

They just answered saying it has two UTXO transaction:


They do have influence when they chose the satoshi/byte.