Search content
Sort by

Showing 20 of 239 results by Didley1JT
Post
Topic
Board Hardware
Re: Avalon 8 official specs released
by
Didley1JT
on 28/04/2018, 01:49:56 UTC
I'm finally back!

Just moved my family from Louisiana to the Pacific Northwest. It's so much better here. And electricity is almost two cents per kW-hr cheaper! They have a three tier power rate here that starts at $.07361 and then tops out at $.08118. Had the electrician come out and start me with two 30A/240V circuits.

Currently running the two Avalon 821s I bought from the first batch (finally). At the 0 voltage setting, they're sitting at 11.5TH/s and 11.6TH/s and both are at 30deg Celsius. Next step is to take advantage of the heated air to help heat the house when it's cold. Kind of bad timing as we head into summer, but at least I'll be ready for the fall/winter this year.
Post
Topic
Board Mining (Altcoins)
Re: L3+ Does... literally nothing
by
Didley1JT
on 27/04/2018, 05:12:46 UTC
the issue is he put an sd card into it why?

They don't need one.

So he most likely killed it with the sd card hack.


@ op  I live in NJ  zip 07731 .

 I have 11 of these units.


Send me yours  I will try to rescue it for you.

Just let me know 1 thing


what is your router?

192.168.?.1

the questionmark  could be :

0
1
2
10

I will set it up for you to the pool of your choice if possible. or determine if you killed off the controller.

If you killed the controller  and the boards are good  I can send you one of my 11  and keep yours  plus a bit of coin to pay for the controller.


I read your post closely you have rasp pi's  for your avalon's

detach them  then try to see if it works..  I have had rasp pi's  fuck with other mining gear on my network.

I suspect  the controller is setting  the dhcp to the rasp pi  number.

I had to set both the controller and the rasp pi to static addresses.

Try  running the L3 with no avalon's running  and see if it shows.

I think the issue is caused by some ethernet switches.  and both things set to the same address fucking one up.

Hey, Phil. I tried imaging an SD card after fighting with it for over an hour. I wasn't running any other miners when trying to get the L3+ going (not even powered on or plugged in to the network).

I'm under warranty so I will will try one of the US repair centers. Just a giant pain in the ass.

I must have pulled up an old L3 setup guide because it showed putting an SD card in the slot.
Post
Topic
Board Mining (Altcoins)
Re: L3+ Does... literally nothing
by
Didley1JT
on 25/04/2018, 09:02:23 UTC
Are you sure that you have a DHCP-server running on your network?

I believe the L3+ needs to get an IP from a local DHCP server to get a local IP address.

HTH

Yep. Seems like this thing is just dead.
Post
Topic
Board Mining (Altcoins)
Re: L3+ Does... literally nothing
by
Didley1JT
on 25/04/2018, 08:34:18 UTC
Does it make noise? With Bitmain ASICs that could be a good indicator that it is working.

In any case, that sounds like a lemon ASIC. You sure it wasn't damaged while you were moving cross-country? Good thing is that your warranty should still be active.

The fans come on at maybe 5%. It wasn't damaged. It rode in the car with me and I didn't open the box until today, so it was well protected.
Post
Topic
Board Mining (Altcoins)
L3+ Does... literally nothing
by
Didley1JT
on 25/04/2018, 07:32:22 UTC
I got this from Bitmain directly mid-march but because of a move across the country, I am just getting around to setting it up.

After FINALLY realizing that it wasn't shipped with an SD card, I imaged an SD card and put it in. Unfortunately, it is still doing absolutely nothing.

With the PSU off, I plug everything in (1 Ethernet and 9 six pin connectors. Then I flip the power on. Red lights at the back of the controller come on and the Orange and Green light around the Ethernet cable come on.

That's it. That's all it does. Sometimes the green light for the ethernet will blink a little, but I can't find it on my network and I even download additional apps to search the network for all IPs.

The Fault and Normal lights have been off and have never come on.

I've tried pressing IP Report. I've tried holding it down. I've tried plugging in the 8 power connectors on the hashing boards, turning it on, and then plugging in the connector for the control board. No change.

I've tried pressing reset. I've tried holding reset down for 5 seconds where Bitmain says the unit will restart itself (it doesn't).

And my network is simple. DHCP, no static IPs, no firewall that would block it... I've been able to hook up my Avalon miners with absolutely no problem. I've restarted the router, the modem, checked connections, changed ethernet cables, etc. etc. etc....

Really frustrated at this point and do not like the thought that I have to send this damn thing back to CHINA to get fixed.

If any of you have any ideas, I would really appreciate it.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 13:16:41 UTC
how much was it for 1 A821 tonight?

$3550
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 02:46:03 UTC
GOD DAMNIT.  1 left, I add to cart, and says not aval.  Unreal

Yes Blok, please fix that someday, if you get 1 in the cart, let them own it.

Actually if you noticed this was changed with recent update on the site.  Timer in cart expires items, items held for you once they get in the cart for 5 minutes.  Just someone clicked faster hence never actually got in your cart.......

I did not try, so I did not notice.

But, dang, thanks for listening!!!!!!!

I noticed you didnt try after i read it again, but yeah we listen.  Our dev was on the laptop all day at CES trying to get that sorted before doing this sale, lol.

Well at least I don't have to try and get them tomorrow.  When I get them in I can decide what to do.  Any word on if I can just plug into same controller I have running my 741's or should I order another controller to run the 821's separately?

Same controller, firmware update should be out by time miners ship.

So use same controller to run 741 and 821?  Like at same time I mean by asking.  I have 5 setup daisy chained on a controller now, when I add the 821's do I just plug in to another usb port on the controller?


Same question.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 02:21:52 UTC
I had one in my cart, and even made it to PayPal.  I didn't have my PayPal balance established with my CC, and ended up being too slow.



At least you know the price point is established.  What did that take?  Less than 10 minutes.  

Yeah. Pretty much: Gripe, gripe, gripe... OH SHIT OH SHIT OH SHIT ORDER ORDER ORDER!
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 02:15:50 UTC
Guys, there is absolutely no way for them to live feed inventory after you’ve loaded the page unless they implemented like a live ticker function. But they’ll be gone so fast there’s no point in doing that.

5 people load the page with one in stock... 4 of them aren’t going to get it into their cart...

Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 01:55:08 UTC
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 01:54:43 UTC
I’m wondering if that is MinerWarez.... they’re based in Washington. And the location just changed from Seattle to Enumclaw.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 01:33:11 UTC
^^

You forgot annoying.




^^^ and apparently from his feedback not trustworthy

One of these days his parents are going to change the WiFi password and that will be the end of it.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 12/01/2018, 01:27:39 UTC
^^

You forgot annoying.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 11/01/2018, 18:03:19 UTC
Blokforge -- I saw your obscene price of $3599 on your site today, and I must ask... Are you insane?

I'm a republican and I believe in capitalism and making a profit and all that, but based on the price that Canaan has had on their site for weeks for pallets of 821's, I estimated that single unit pricing would be in the $2500 to $2800 range.  A bit high, but I would spend that much.  

However, at $3599 you are about a thousand bucks into "making an obscene profit" territory.  I have the money, but I am not spending that much.

I am patient.  I will wait.  With the influx of 821s over the next couple months, 741 prices will drop on ebay.  I'll pick up a few for cheaper prices then.  In the meantime, I have $3000 worth of GPUs coming today from FedEx, and am going that way with my mining for now.

Despite what I write here, I m not a fool.  I can math.  I am not one of these "SHUT UP AND TAKE MY MONEY!!!" idiots who will pay the outrageous price.  And YES, if you pay $3599 for an 821, YOU ARE AN IDIOT.

And while I have your attention, on your site you have 13.5 TH S9's listed for $4999 and 14 TH S9's for $3199.  What the hell kind of pricing logic is that?

Maybe I will get on the site at sale time and try to buy an 821, just to see if I can get it into my cart.

And as with the last sale of 741s, some of these 821s will be on ebay by the weekend, for sale at double price, to be delivered when they receive their pre-order.  This BS must be stopped.  I will go on ebay and harass those thieving bastard sellers.

Our price from canaan as well as the only other distributor that is receiving the first batch was higher, hence higher price.  You may wait for march batches for lower pricing if you wish.

Canaan pricing on their site is irrelevant when they are not for sale nor available, Pricing when actually for sale is the only relevant price.

Same answer with bitmain miners, pricing changes once available, no 14THS batches are coming in the next month at least, so it only shows last price.



^^

As a recognized distributor, I assumed the fault was with Canaan. Don't think my other post was a jab at BF.

Canaan is simply asking for too much. BTC is not at the $20k USD it was and has been falling with few spikes ever since.

Us small-timers just have a hard time justifying spending more money on a miner that is less efficient than the competition. ESPECIALLY when we are all expecting the next generation from Bitmain this year.

I respect you guys have a business to run and you've already shown more focus on the community than any other distributor/manufacturer. We were all just hoping a little better of Canaan.
Post
Topic
Board Marketplace
Re: Good source for used 30 amp PDU's?
by
Didley1JT
on 11/01/2018, 16:14:22 UTC
Definitely eBay. The only issues might be quantities available. Can always chance Alibaba as well.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 11/01/2018, 16:09:36 UTC
Price for 821s on Blokforge is $3600.

I just don’t get it. S9 all the way, I guess.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 08/01/2018, 14:22:47 UTC
3425 EUR (~4100USD) with power supply and controller pre-order + ship

They will sell....just not to me.

I agree. This only serves to further the centralization of mining.

Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 08/01/2018, 13:28:48 UTC
Yep. At that price the S9 is a profoundly better option. The reliability of the 821 is unknown. The S9 is more efficient and costs nearly half the price. And BTC is seeing resistance to the $20k USD price.

I'm not sure their thinking here. Hoping Blokforge has a more realistic price.
Post
Topic
Board Service Announcements
Re: Cryptouniverse - Official Canaan Distributor
by
Didley1JT
on 08/01/2018, 13:19:10 UTC
$4300 for a miner worse than the S9 is absurd.
Post
Topic
Board Service Announcements
Re: BLOKFORGE- Official Canaan Distributor
by
Didley1JT
on 08/01/2018, 13:07:16 UTC
Cryptouniverse presold their 821 batch at over $3100 EURO. If that is going to be the price of all distributors, then I am switching to Bitmain for everything. That is purely insane.