Search content
Sort by
Showing 20 of 194 results by invicta
While I wrote this back, I got an answer from Canaan support who have been helping but think they are leading me the wrong way with this particular unit. They told me this 1166Pro-68 cannot run with 2 boards as it's not designed to, so deliberately disconnecting it causes this issue (but ignored that it has worked once previously and never again) - they supplied some software and told me to use 'Power Mode 4' so I can run it at 64% but FMS can set it which makes me think it's for 12 and 13 series miners.
I reattached the middle board (H2) and the miner works fine and normally, no issues (log attached bottom of message) - so I don't think there is a comms error on the other two boards:
I reattached the middle board (H2) and the miner works fine and normally, no issues (log attached bottom of message) - so I don't think there is a comms error on the other two boards:
If that's what they said then you can't run this unit with only two hashboard. I don't know about power mode 4 using the FMS app you can only find two options there under switch mode "normal mode and high performance mode" There is no power mode 4 on the FMS app you can maybe try to send a command to adjust the power to these two hashboard check the command below and send this command using FMS app under diagnose and don't forget to replace 1260 below and test if it would work with only 2 hashboard.
Code:
[{"command":"ascset", "parameter":"0,hashpower,1260"}]
If you don't have any other choice then run the 3 hashboards but you would need to replace your wall outlet that support 20a or above.
To be honest, they told me a lot of different things and got the impression they weren't listening to me properly. FMS 2.3.3 is the one on their site, they told me to do the firmware update in AvalonBuddy which they sent through and then when I told them FMS didn't have Power Mode, they sent me a newer FMS 2.3.5 which does have that setting but gets this error when attempting to set:
"ip 192.168.0.240 error result:
ASC 0 set failed: Unknown option: power-level-set"
What does that hashpower command you have provided do? Is that a cgminer command for the 'diagnose' part of FMS?
I have all 3 hashboards connected again now in Normal mode which gets around 60-61TH average, but the cable gets slightly warm, the socket gets warm/hot and the plug pins are too hot to hold onto - not that concerning but over time might get too hot and can't risk it. I should add that I'm in the UK so I am using 240V with 13A fuses in the plug and the sockets are rated for 13-14A max and 20A per dual socket in a modern office with recent electrical renovations so it should be better spec than residential.
I will try your command later (can you explain what it is meant to do please)? If there is a way to limit the frequency of the ASICs or max voltage that would also have the same effect I imagine as long as it sets and takes hold permanently. Is there any way of injecting a command to cgminer when the miner controller board boots?
0x11 is no hashrate in 5 minutes.
Focus on these two logs ECHU[1 1 1] ECMM[1] it seems the hashboard is detected but it's not communicating properly to the control board.
Would you mind to check the conductive copper sheet if you screw them well or do I think you need to try to remove the copper sheet and clean it with isopropyl alcohol and use sandpaper to clean the terminals reassemble and test it again? Make sure that you fix the screw properly to make sure it powers up these two hashboard.
I don't think Aging can fix this issue and aging is only use to autotune the unit.
Focus on these two logs ECHU[1 1 1] ECMM[1] it seems the hashboard is detected but it's not communicating properly to the control board.
Would you mind to check the conductive copper sheet if you screw them well or do I think you need to try to remove the copper sheet and clean it with isopropyl alcohol and use sandpaper to clean the terminals reassemble and test it again? Make sure that you fix the screw properly to make sure it powers up these two hashboard.
I don't think Aging can fix this issue and aging is only use to autotune the unit.
While I wrote this back, I got an answer from Canaan support who have been helping but think they are leading me the wrong way with this particular unit. They told me this 1166Pro-68 cannot run with 2 boards as it's not designed to, so deliberately disconnecting it causes this issue (but ignored that it has worked once previously and never again) - they supplied some software and told me to use 'Power Mode 4' so I can run it at 64% but FMS can set it which makes me think it's for 12 and 13 series miners.
I reattached the middle board (H2) and the miner works fine and normally, no issues (log attached bottom of message) - so I don't think there is a comms error on the other two boards:
"{'STATUS':[{'STATUS':'S','When':2377,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':2391,'MHS av':60506172.09,'MHS 30s':69097908.75,'MHS 1m':67784187.78,'MHS 5m':61727236.83,'MHS 15m':58085348.01,'Found Blocks':0,'Getworks':93,'Accepted':1025,'Rejected':2,'Hardware Errors':1,'Utility':25.72,'Discarded':6682178,'Stale':0,'Get Failures':0,'Local Work':33608,'Remote Failures':0,'Network Blocks':7,'Total MH':144267633222.0000,'Work Utility':845621.90,'Difficulty Accepted':31464127.00000000,'Difficulty Rejected':104282.00000000,'Difficulty Stale':0.00000000,'Best Share':73724256,'Device Hardware%':0.0000,'Device Rejected%':0.3095,'Pool Rejected%':0.3303,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':2377,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':2391,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1166Pro-68-21072802_4ec6bb0_211fc46] DNA[02010000ac7c7134] MEMFREE[1193208.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[2391] BOOTBY[0x05.00000000] LW[2339498] MH[0 1 0] HW[1] DH[25.408%] Temp[30] TMax[77] TAvg[66] Fan1[4243] Fan2[4248] Fan3[4128] Fan4[4128] FanR[63%] Vo[349] PS[0 1224 1396 229 3208 1400 3503] PLL0[9333 831 737 3019] PLL1[9596 1123 917 2284] PLL2[9101 911 785 3123] GHSspd[46797.44] DHspd[37.143%] GHSmm[76548.96] GHSavg[60500.36] WU[845180.23] Freq[458.27] Led[0] MGHS[20377.93 20169.24 19953.19] MTmax[77 73 77] MTavg[65 64 67] TA[360] Core[A3201] PING[46] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[0 0 0] ECMM[0] SF0[448 468 488 508] SF1[448 468 488 508] SF2[448 468 488 508] PVT_T0[ 66 70 68 69 71 68 66 70 74 69 74 69 69 71 72 74 69 67 74 71 77 77 72 71 68 73 76 72 68 67 69 69 75 74 69 68 68 67 76 75 68 67 64 65 70 64 65 62 63 63 64 62 62 63 66 61 62 59 60 61 52 59 53 58 60 59 60 63 62 60 63 61 62 64 60 60 66 64 64 66 62 64 64 66 63 66 61 61 68 66 64 65 61 64 67 65 66 66 65 67 70 69 64 66 64 65 65 65 65 65 63 63 64 66 64 65 64 60 66 71] PVT_T1[ 66 70 66 66 69 67 66 69 64 67 69 67 62 69 67 69 68 64 67 72 71 72 68 64 64 67 72 72 69 68 66 71 70 68 71 64 62 72 73 73 65 66 63 66 69 66 67 64 64 64 65 64 64 64 58 62 64 62 60 60 56 61 55 60 60 57 58 63 59 59 62 61 62 62 59 63 64 63 65 62 60 59 65 65 64 64 61 59 64 64 65 64 63 64 66 68 64 65 63 63 65 67 64 67 62 62 63 65 63 65 61 64 63 62 64 64 66 63 67 68] PVT_T2[ 67 70 67 69 71 69 66 73 73 73 71 69 72 72 72 70 77 66 71 75 75 72 76 72 69 72 68 69 72 72 70 70 66 71 68 71 70 72 72 76 74 69 66 66 71 69 65 69 65 67 68 69 69 62 69 63 62 62 64 64 61 58 54 59 60 59 61 60 62 64 67 64 63 73 64 64 68 66 66 67 64 65 68 66 66 65 69 65 65 68 65 66 67 64 69 65 66 67 65 69 71 69 67 67 69 69 65 65 66 67 70 67 67 68 68 69 65 64 66 69] PVT_V0[319 321 325 321 326 323 328 329 334 321 321 322 327 324 327 319 321 322 327 325 325 311 310 306 318 318 319 296 295 305 327 329 327 317 317 321 325 325 324 322 326 323 329 328 329 326 326 327 321 322 318 324 321 322 327 324 326 323 324 325 331 326 329 323 327 328 334 334 334 333 331 327 330 327 333 330 329 328 326 327 325 335 334 333 330 330 327 329 327 322 325 321 320 334 333 335 325 325 329 317 317 319 326 326 330 334 331 330 329 329 328 324 325 327 326 325 327 328 329 332] PVT_V1[322 327 332 331 334 334 324 322 327 323 326 326 327 326 330 309 320 324 322 325 331 329 330 330 318 314 317 331 329 329 321 323 319 316 305 311 323 327 325 298 304 307 315 314 302 326 318 313 322 323 325 326 328 326 325 322 328 331 334 338 338 334 331 328 325 327 336 340 335 324 330 331 327 331 335 323 326 326 322 320 318 330 326 329 330 332 331 329 327 326 318 319 316 334 331 327 330 327 332 315 314 318 327 331 332 322 326 325 334 334 333 328 325 323 335 333 329 321 320 326] PVT_V2[325 326 331 330 331 330 330 326 331 333 333 334 328 330 315 317 306 309 313 314 319 325 330 327 319 316 319 301 302 305 318 322 326 308 313 310 321 322 324 327 327 330 318 320 321 329 333 333 316 315 313 331 329 331 319 328 327 319 319 327 332 327 326 330 323 328 329 324 318 329 329 329 329 326 332 331 329 328 331 331 331 330 329 329 326 325 322 335 333 330 330 327 331 328 332 331 334 330 334 328 327 323 322 325 316 334 334 334 312 314 319 327 327 328 325 323 327 329 333 337] MW[783488 783535 783453] MW0[42 46 59 62 46 44 50 48 51 46 32 49 36 60 64 30 48 39 45 51 48 43 45 51 49 45 57 42 50 57 35 55 37 34 35 39 41 42 34 35 42 55 65 53 48 47 51 41 49 35 46 42 36 64 56 45 44 44 46 38 62 58 52 53 43 54 49 44 57 54 38 62 42 44 43 51 46 52 50 47 45 63 50 42 38 61 52 37 50 59 41 39 58 43 39 54 48 58 48 48 50 47 46 39 51 56 49 47 35 40 45 43 37 58 42 38 48 42 51 52] MW1[53 49 42 51 49 49 63 44 50 56 53 43 45 45 52 41 55 43 43 53 43 59 55 45 38 50 41 59 46 52 40 49 42 45 50 31 40 45 44 51 23 31 44 44 49 37 54 46 41 44 60 50 44 46 37 36 43 45 45 47 70 49 40 46 46 38 42 50 48 36 48 38 61 52 45 55 38 53 44 43 42 40 56 43 52 48 57 44 50 47 38 47 44 34 49 41 39 47 52 54 38 34 50 38 46 60 40 49 56 54 51 46 39 39 73 59 49 45 58 38] MW2[48 45 44 41 59 48 56 50 43 48 50 47 58 51 40 50 44 52 34 34 24 46 55 43 43 51 43 54 29 43 34 47 48 37 43 52 46 45 36 34 52 35 46 47 53 49 41 37 46 55 45 48 36 45 57 44 53 36 52 36 55 47 45 49 42 55 50 49 49 49 54 45 53 45 54 45 44 46 43 41 52 37 45 34 36 63 42 37 51 40 60 54 45 48 42 47 44 43 44 56 46 66 42 46 45 35 51 54 53 44 31 40 51 44 58 43 61 56 46 46] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[] ATAOPTS1[] ADJ[0] Bar[24%] COP[0 0 0] MPO[3200] MVL[87] ATABD0[0 0 0 0] ATABD1[0 0 0 0] ATABD2[0 0 0 0] WORKMODE[0]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}"
Please post the logs here so that we can check them for you, what is going on behind your unit or if you want to learn how to read and troubleshoot it on your own you can download the guide from this link below under manual then troubleshoot
- https://www.canaan.io/service/447
Also, check the pool where you mine, and maybe the issue is related to the pool server if you have unstable internet or high ping the miner will stop.
- https://www.canaan.io/service/447
Also, check the pool where you mine, and maybe the issue is related to the pool server if you have unstable internet or high ping the miner will stop.
I had BOOTBY = 0x04 after I restarted it from the dashboard, now it's 0x11.
{'STATUS':[{'STATUS':'S','When':90,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':82,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':12,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':1056910,'Stale':0,'Get Failures':0,'Local Work':4,'Remote Failures':0,'Network Blocks':1,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':90,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':82,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1166Pro-68-21042001_4ec6bb0_61407fa] DNA[02010000ac7c7134] MEMFREE[1221984.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 2 ] Elapsed[110] BOOTBY[0x11.00000000] LW[0] MH[0 0 0] HW[0] DH[0.000%] Temp[22] TMax[22] TAvg[22] Fan1[5198] Fan2[5144] Fan3[5109] Fan4[5127] FanR[68%] Vo[345] PS[0 1224 1381 151 2085 1380] PLL0[0 0 0 0] PLL1[0 0 0 0] PLL2[0 0 0 0] GHSspd[0.00] DHspd[0.000%] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[-273 -273 -273] MTavg[0 0 0] TA[240] Core[A3201] PING[0] POWS[0] HASHS[0 0 0] POOLS[0] SoftOFF[0] ECHU[1 1 1] ECMM[1] SF0[480 500 520 540] SF1[480 500 520 540] SF2[480 500 520 540] PVT_T0[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T1[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_T2[-273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273 -273] PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[0 0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-freq 384:404:424:444 --avalon10-voltage-level 87 ] ATAOPTS1[--avalon10-freq 480:500:520:540 --avalon10-voltage-level 70 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[480 500 520 540] ATABD1[480 500 520 540] ATABD2[480 500 520 540] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25}
Is there a method to get this to run with 2 boards out of 3, it did it once but it hasn't since.
Also, what is the 'Aging' setting in FMS?
Hi - looking for assistance with this please. Got an AvalonMiner 1166Pro here, works fine with all 3 boards. Deliberately disconnected one of the boards as the wall socket was getting too hot for my liking and wanted to draw less power so thought 2/3 would be fine. Miner seems to get stuck in reboot loop after 5 minutes. There was one time where it went green and continued mining on 2/3 boards as planned but hasn't done it again since. The log isn't very helpful compared to the Antminers so no idea what it's actually doing behind the scenes. Can anyone advise on how to resolve this please - basically looking to override and make it run on 2/3 boards only, there is no faulty board and it's fully working (eg didn't buy a junk parts miner). Thanks in advance
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
It's probably Windows as it reserves more memory. Linux (or HiveOS) will get the most out of your 4GB cards. The DAG is over the limit and you're already suffering losses each epoch. My 4GB cards are still getting 22-24MH/s on this epoch.
Re: PhoenixMiner 4.9c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
-rvram -1
Yes use -rvram -1 or NBminer maby it works better,i think maby Phoenixminer developer is dead !!!
This worked for me too. That DAG epoch change caused 3 rigs to crash this morning. 4GB cards are getting tight now...
That was literally the first thing I said...
Get ready to move on Linux slowly. Windows reserves 300 + MB of VRAM. The current DAG size is 3.57gb. The Phoenix miner free vram check was set to 384mb by def. When the dag + win reservation is taken away from 4gb vram, only 130MB of vram is left (that's why Phoenix made the problem). And with the command -rvram -1 you have time up to DAG 3.7gb or ~ 1.7.2020. After that, Linux....until 21.12.2020.
In the case of mixed rigs with 8gb and 4gb cards, what will be the behavior? I seemed to have understood that if there is at least an 8GB card the rig should continue to work correctly, is it correct?
I think the lead card (GPU0) is better with 8GB VRAM as it reserves more than the rest if you check GPU memory usage in MSI Afterburner, or you can try integrated graphics for the main display output but I had problems with not being able to control the GPU voltages after that - that was nearly 2 years ago that I last tried though.
It would be interesting to understand now if it is working because this would allow to keep the 4Gb cards having only 1 8Gb card
That is impossible. Only hardware intervention
GPU0 needs more reserved VRAM for Windows, so by placing an 8GB card there, you don't need to worry about this. It is not to say an 8GB card first and the rest 4GB cards will work past 23rd December 2020, it is to say it'll work until then and not stop early.
In the case of mixed rigs with 8gb and 4gb cards, what will be the behavior? I seemed to have understood that if there is at least an 8GB card the rig should continue to work correctly, is it correct?
This is where we are now:
(both have PCIe as main GPU, "Low res" has no display, "higher res" has HDMI dummy display )
Actually sometimes the GPU seems to use shared system memory and drop the hashrate down to 1.5-2MH/s - which is still basically useless as it's slow AF.
Re: PhoenixMiner 4.9c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
-rvram -1
Yes use -rvram -1 or NBminer maby it works better,i think maby Phoenixminer developer is dead !!!
This worked for me too. That DAG epoch change caused 3 rigs to crash this morning. 4GB cards are getting tight now...
That was literally the first thing I said...
Get ready to move on Linux slowly. Windows reserves 300 + MB of VRAM. The current DAG size is 3.57gb. The Phoenix miner free vram check was set to 384mb by def. When the dag + win reservation is taken away from 4gb vram, only 130MB of vram is left (that's why Phoenix made the problem). And with the command -rvram -1 you have time up to DAG 3.7gb or ~ 1.7.2020. After that, Linux....until 21.12.2020.
In the case of mixed rigs with 8gb and 4gb cards, what will be the behavior? I seemed to have understood that if there is at least an 8GB card the rig should continue to work correctly, is it correct?
I think the lead card (GPU0) is better with 8GB VRAM as it reserves more than the rest if you check GPU memory usage in MSI Afterburner, or you can try integrated graphics for the main display output but I had problems with not being able to control the GPU voltages after that - that was nearly 2 years ago that I last tried though.
Re: PhoenixMiner 4.9c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
-rvram -1
Yes use -rvram -1 or NBminer maby it works better,i think maby Phoenixminer developer is dead !!!
This worked for me too. That DAG epoch change caused 3 rigs to crash this morning. 4GB cards are getting tight now...
Until the SEC defeats their company and shows that all the fiction and in fact for them or that is not worth it, you can not say it.
Why would the SEC be involved? This is a UK limited company. Also people are entitled to question motives, you cant play the innocent until proven guilty card.
how big is the download of the ETN CLI Wallet and how long does it take to synchronize ? has anyone tested this wallet ? thank you
Depends on many factors like the speed of your connection, the device youre syncing on and its spec. Ive had a laptop connected since November so I havent done a full sync for ages. The wallet works fine but you need to understand CLI. As its a copy of Moneros wallet, Ive used it fairly extensively.
I'm not storing the amount of coins I have in their wallet only for it to be locked by KYC or because Ells is having a bad day.
I've transferred all ETN coins from the ETN mobile miner / wallet to another address since "not my keys, not my coins". I've deleted the mobile miner from my phone.
that's like me, I think mining via smartphone will get any benefit because I think the new coin has a few blocks, but it turns out that mobile mining only waste time and can damage the smartphone components we have
It doesnt damage anything, how are people still not getting this after nearly a year... its an airdrop, its not doing any PoW consensus/validation. CharlieCox got rid of the app to use a paper wallet (I assume) as its safer and is a good idea, though without the app you cant use the Instant Payments so it has no unique or interesting features at that point.
maybe people who say fraud is the one who feels the loss in this project, but some people say this is a very good project, so in my opinion this is a form of disappointment for the person who is disadvantaged from this project ... sorry if I'm wrong ...
It would be a decent project but it's spearheaded by an inexperienced yet egocentric team. Richard Ells has little credibility even outside of blockchain, and none within. It's probably not an intentional scam, but the way it's being pumped today, it has real Ponzi-like qualities.
Ponzi?
LOL
Anyway, looks like you did well, even tho this is only a tiny fraction of where ETN is going
You said you were only going in for short term. Sell already or do you expect to see more before you sell? I would go for long term, but you know what I think lol
Must be happy you invested
Yes, Ponzi. Someone has taken responsibility for pumping it, FOMO driving the price up further and then bringing it back down again - that is, the last investors will get burned and the early ones make the money.
Im going to milk it for all its worth then get out before it goes pear-shaped, as in beyond the point of no return.
Im happy I made money, Im not happy it was at the expense of my integrity doing it off the back of something I dont believe in.
It is not a tiny fraction of anything, if you think 800 BTC worth of trade will flow through ETN each day then you are gravely mistaken. Also, what is this about locked wallets, not the first time its happened either is it?
Responsible citation?
800 will be well surpassed
They upgraded and once finished, most found that when they logged out and back in they were fine
The couple people reporting they are still receiving the message, have/should create ticket, as this is not common
Enivitable with a project which has a level of centralization to it. Sometimes being a decentralized-centralized hybrid is a double edge sword.
You really shouldnt feel bad because ETN is a crypto, and like any legit crypto, it has dynamics that a ponzi doesnt have, as they are not alike in definition.
Reasonable citation? Go and follow anything in the Discord or Telegram, there is some serious dick-swinging going on with people claiming to be pouring money in to be driving the price up, this is insider trading, not that it matters and yes, you are right, it is not a 'Ponzi' in that respect but it mimics a lot of the qualities of one. When that pump finished a lot of people were left with overpriced coins at 200+ sats and yes, if you blindly believe, then 200+ sats is cheap but if you are a sceptic, you've been done. A normal increase in trade volume is under 100% for a good pump, 2600% or whatever it was is manipulation by an entity, even you can't pretend that you can't see it. Also, it's well known by now that most fanboys are sitting on bags waiting for it to moon, they are not trading. And before you say but 'people can manipulate any coin', you can surely see that when a coin has crap trade volume normally, all it took was a few million USD to swing it - the only people who can do that with BTC, XRP, ETH, etc. are mega-corporations and global banks; ETN was affected by the sounds of it by a few wealthy individuals.
I can't see how there is much element of decentralisation to this at all any more; majority of the miners are ASICs in China built by one or two companies, the wallet service and Instant Payments all flows through their servers (which are notoriously unreliable) and that doesn't mean it can't work but please show, by example, where the decentralisation is for this coin because I am struggling to see it.
I don't think I'll get through to you and honestly, that's just fine, this thing is going to implode on itself the way it's going. Everyone loves a coin when it's rising in price but when it crashes down, it's going to be a lot worse than the last time.
My wallet wasn't affected but I'm not storing the amount of coins I have in their wallet only for it to be locked by KYC or because Ells is having a bad day.
its not scam, i think it 1 of the source of mining. you can use your rig and phone to mine in Electronium. Electronium also have a lot of project coming. so i think it is now the time to buy more electronium for the future 
Please go and educate yourself. You can't mine with a rig unless 'rig' means ASIC because they made sure of that, so much for decentralised and for the people. All this weekend showed is that the daily trade volume is so bad anyone with a reasonable amount of money can manipulate the price, that's why it rocketed before the weekend and then dropped back as those people dumped leaving idiots with bags of overpriced coins.
If you paid attention, then when the BTC started to rise in price, then on the coinmarketcap the first positions were occupied by Electroneum. I think it's hard to call a scam project if it is so badly needed by someone.
Because the price was manipulated by people/entities pumping and dumping it, go look at the charts and make your own mind up... of course, any fanboy will tell you it's not that but please explain why a coin would go from 30 BTC trade per day up to 800 BTC and don't say it's Instant Payments...
When the Electroneum was conducting a bounty campaign, many at some point thought they were scammers and left the campaign - lucky ones who stayed in it and got a good payment!
When i was starting here in cryptocurrency a lot of people in my country is promoting electroneum and i am confident that it is not a scam, electroneum have raised a lot of money on there ico and even i dont invent on it, i know it is not a scam.Definitely, Electroneum is not a scam. ETN is a privacy coin, a mobile-based platform and it is designed for smartphone users, more than 2 billion I guess. It can also be mined via smartphones, however, I don't know if it's productive.
The one thing its not is a privacy coin...
maybe people who say fraud is the one who feels the loss in this project, but some people say this is a very good project, so in my opinion this is a form of disappointment for the person who is disadvantaged from this project ... sorry if I'm wrong ...
It would be a decent project but it's spearheaded by an inexperienced yet egocentric team. Richard Ells has little credibility even outside of blockchain, and none within. It's probably not an intentional scam, but the way it's being pumped today, it has real Ponzi-like qualities.
Ponzi?
LOL
Anyway, looks like you did well, even tho this is only a tiny fraction of where ETN is going
You said you were only going in for short term. Sell already or do you expect to see more before you sell? I would go for long term, but you know what I think lol
Must be happy you invested
Yes, Ponzi. Someone has taken responsibility for pumping it, FOMO driving the price up further and then bringing it back down again - that is, the last investors will get burned and the early ones make the money.
Im going to milk it for all its worth then get out before it goes pear-shaped, as in beyond the point of no return.
Im happy I made money, Im not happy it was at the expense of my integrity doing it off the back of something I dont believe in.
It is not a tiny fraction of anything, if you think 800 BTC worth of trade will flow through ETN each day then you are gravely mistaken. Also, what is this about locked wallets, not the first time its happened either is it?
I think electroneum is a legit project. It was very popular during the ICO and it raises enough money for development. The bear season has affected it too like every other coin but it seems to be recovering now
It doesn't matter if it was popular during the ICO, that just shows it duped a lot of people - Bitconnect did exactly the same. It's recovering now because people are manipulating the price, if you spent time on Discord or Telegram people are actively bragged or taking responsibility for the trade volume surging from 30 BTC per day to 800 BTC. Make your own minds up on this one.
maybe people who say fraud is the one who feels the loss in this project, but some people say this is a very good project, so in my opinion this is a form of disappointment for the person who is disadvantaged from this project ... sorry if I'm wrong ...
It would be a decent project but it's spearheaded by an inexperienced yet egocentric team. Richard Ells has little credibility even outside of blockchain, and none within. It's probably not an intentional scam, but the way it's being pumped today, it has real Ponzi-like qualities.
My ETN account says:
We'll be back soon
We are currently migrating your wallet to the new instant payment system.
Please try again later.
What a joke. Suddenly 10x of the normal volume appeared for no reason whatsoever. Accounts randomly blocked with the message above so people can't sell their coins.
So the price only go upwards during the giant pump - nothing to counterbalance.
Not talking about the fact without KYC verification I won't be able to send my coins from my ETN wallet.
When I bought and mined my coins it was an anonymous crypto. Couple of months later I can't send my coins without providing personal details.
This is not a real cryptocurrency.
It's a centralised ponzi scheme.
We'll be back soon
We are currently migrating your wallet to the new instant payment system.
Please try again later.
What a joke. Suddenly 10x of the normal volume appeared for no reason whatsoever. Accounts randomly blocked with the message above so people can't sell their coins.
So the price only go upwards during the giant pump - nothing to counterbalance.
Not talking about the fact without KYC verification I won't be able to send my coins from my ETN wallet.
When I bought and mined my coins it was an anonymous crypto. Couple of months later I can't send my coins without providing personal details.
This is not a real cryptocurrency.
It's a centralised ponzi scheme.
Wasn't that done ages ago? The wallet upgrade? Can you not migrate to a paper wallet? I'll admit, this whole price spike caught me off-guard somewhat and some 'whales' are taking responsibility for it (not that an actual whale would normally brag about it).
I was reluctant to call it that but it does have a bit of a whiff of a Ponzi right now, money flows in, FOMO hype carries it beyond the money they put in, they cash out, price drops but support is above what it was, rinse and repeat - when they get bored or had their fill it's only going to go one way. And they can do this because the daily trade was so low before - you can't do this with Ripple (for example). When I submitted a buy order it was enough to bump the price 2-3 sats instanteously earlier. Then there was also the spike to 328 sats down to 170 back up to 210 all in about 15 minutes.
Thanks for bringing this to my attention, I was about to send a load of BTC over and ride it this weekend, but I'm not sure I will now. I really hope you get it sorted though - good luck.
It is good for insiders and speculators, I'm not one of them.
I'm more likely supporting cryptos for their mission and not to get easy lambo.
Good luck to you, but careful. This looks to me a bit of a Chaincoin event 2.0
Im on your side. I dont really believe in it, all the stuff Ells says are things that sound amazing and for the greater good on paper like helping the unbanked. I dont mind speculating some funds this weekend but I am concerned about the wallet locking as someone else pointed out this last time there was a pump. Im in crypto long-term and projects like this always bother me but it doesnt mean I wont look on with interest.
Not sure about this. One needs to check the Ico in detail.
I wouldn't bother. They've pretty much entirely changed the White Paper so what held true at ICO doesn't any more. At the moment, there is some hard pumping going on so if you have a healthy risk appetite, buy some coins and cash out for some easy profit.
My ETN account says:
We'll be back soon
We are currently migrating your wallet to the new instant payment system.
Please try again later.
What a joke. Suddenly 10x of the normal volume appeared for no reason whatsoever. Accounts randomly blocked with the message above so people can't sell their coins.
So the price only go upwards during the giant pump - nothing to counterbalance.
Not talking about the fact without KYC verification I won't be able to send my coins from my ETN wallet.
When I bought and mined my coins it was an anonymous crypto. Couple of months later I can't send my coins without providing personal details.
This is not a real cryptocurrency.
It's a centralised ponzi scheme.
We'll be back soon
We are currently migrating your wallet to the new instant payment system.
Please try again later.
What a joke. Suddenly 10x of the normal volume appeared for no reason whatsoever. Accounts randomly blocked with the message above so people can't sell their coins.
So the price only go upwards during the giant pump - nothing to counterbalance.
Not talking about the fact without KYC verification I won't be able to send my coins from my ETN wallet.
When I bought and mined my coins it was an anonymous crypto. Couple of months later I can't send my coins without providing personal details.
This is not a real cryptocurrency.
It's a centralised ponzi scheme.
Wasn't that done ages ago? The wallet upgrade? Can you not migrate to a paper wallet? I'll admit, this whole price spike caught me off-guard somewhat and some 'whales' are taking responsibility for it (not that an actual whale would normally brag about it).
I was reluctant to call it that but it does have a bit of a whiff of a Ponzi right now, money flows in, FOMO hype carries it beyond the money they put in, they cash out, price drops but support is above what it was, rinse and repeat - when they get bored or had their fill it's only going to go one way. And they can do this because the daily trade was so low before - you can't do this with Ripple (for example). When I submitted a buy order it was enough to bump the price 2-3 sats instanteously earlier. Then there was also the spike to 328 sats down to 170 back up to 210 all in about 15 minutes.
Thanks for bringing this to my attention, I was about to send a load of BTC over and ride it this weekend, but I'm not sure I will now. I really hope you get it sorted though - good luck.