instead of using the .sh file, have you tried just opening terminal and running the command?

I don't think there's a difference but maybe that might work 


I think the problem is the terminal today i look to my pool and i see hashrates over 100ghz  and that my stick goes alot of times offline  but my  raspberry says hashrates between 0 en 22 mhz  and  100mhz is in the top and just the accepted blocks no offlines  so i dont know  kust really weird

Also, GSH starts at 100 unless you change the --gekko-start-freq

That's unrelated to if it will increase, but it will start at 100.

The chosen freq to scale up to, defaults to 100, but is set with --gekko-newpac-freq

i.e. a GSH is a newpac (not a 2pac)

But if you are setting everything correctly on the command line and it is not increasing after running for 10 minutes, and there's no hardware issue, the above post will be the cause:

You dont need those "/" after your username and password. Try taking them out.

What does your command line say now?


I created  the .sh file  with the command line :

./cgminer -o stratum+tcp://sha256.mining-dutch.nl:9996 -u / -p /--suggest-diff 10 --gekko-newpac-freq 200   

I open it in the LXtherminal   and sgminer start up like this

ersion 4.11.1 - Started: [2021-10-03 21:19:44.088]
--------------------------------------------------------------------------------
 (5s):19.93G (1m):14.65G (5m):4.429G (15m):1.592G (avg):21.40Gh/s
 A:131584  R:0  HW:0  WU:298.9/m
 Connected to sha256.mining-dutch.nl diff 256 with stratum as user /
 Block: a0b29095...  Diff:54.7G  Started: [21:19:42.911]  Best share: 425
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
 0: GSH 10036027: BM1387:02+ 100.00MHz T:100 P:99  (372:188) | 92.2% WU:^94% | 1
9.90G / 21.33Gh/s WU:298.9/m----------------------------------------------------
 [2021-10-03 21:19:42.906] Pool 1 difficulty changed to 256
 [2021-10-03 21:19:42.911] Network diff set to 54.7G
 [2021-10-03 21:19:42.911] Stratum from pool 0 detected new block at height 7075
09
 [2021-10-03 21:19:42.920] Stratum from pool 1 requested work restart
 [2021-10-03 21:19:43.816] 0: GSH 0 - Toggling ASIC nRST to reset
 [2021-10-03 21:19:44.087] 0: GSH 0 - NewPac Bitcoin Miner (10036027)
 [2021-10-03 21:19:44.088] Pool 0 stratum+tcp://sha256.mining-dutch.nl:9996 stab
le for >120 seconds
 [2021-10-03 21:19:44.089] Switching to pool 0 stratum+tcp://sha256.mining-dutch
.nl:9996
 [2021-10-03 21:20:05.519] Accepted f0b383cf Diff 272/256 GSH 0 pool 0
 [2021-10-03 21:20:47.330] Accepted 9a140a68 Diff 425/256 GSH 0 pool 0

From that last screen shot. You have got a NEWPAC not a 2pac. Which means your freq command is irrelevant. You need the command for the NEWPAC freq.
[I have seen it also and try  changing it  it also make no difference
 I even have deleted the full map and start over again now i dont show tthis message no more

 (2021-10-03 15:30:26.013] GSH 0: setting frequency to 100.00MHz
 [2021-10-03 15:30:26.022] GSH 0: open cores @ 100.00MHz
 [2021-10-03 15:30:27.206] GSH 0: start work @ 100.00MHz)

But keeps on 100 mhz  so i dont know what to do anymore

If youve compiled it on the pi then you can open a new text document in the cgminer folder. Then wrote your command line in “./cgminer etc etc etc” save it as a “.sh” file then right click and change the permissions to make it executable. Then doible click and select open in terminal.
[ cgminer version 4.11.1 - Started: [2021-10-03 15:29:32.171]
--------------------------------------------------------------------------------
 (5s):21.40G (1m):10.73G (5m):2.758G (15m):961.2M (avg):9.364Gh/s
 A:65536  R:0  HW:0  WU:135.2/m
 Connected to sha256.mining-dutch.nl diff 256 with stratum as user Davy4260.work
 Block: 54d046c0...  Diff:1.29G  Started: [15:30:45.506]  Best share: 78
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
 0: GSH 10036027: BM1387:2 100.00MHz      | 23.62G / 21.81Gh/s WU:304.7/m
--------------------------------------------------------------------------------
02
 [2021-10-03 15:30:25.561] GSH 0: Toggling ASIC nRST to reset
 [2021-10-03 15:30:25.664] GSH 0: NewPac Bitcoin Miner (10036027)
 [2021-10-03 15:30:25.953] GSH 0: found 2 chip(s)
 [2021-10-03 15:30:26.013] GSH 0: setting frequency to 100.00MHz
 [2021-10-03 15:30:26.022] GSH 0: open cores @ 100.00MHz
 [2021-10-03 15:30:27.206] GSH 0: start work @ 100.00MHz
 [2021-10-03 15:30:44.946] Network diff set to 1.34G
 [2021-10-03 15:30:44.946] Stratum from pool 0 detected new block at height 1376
1572
 [2021-10-03 15:30:45.506] Network diff set to 1.29G
 [2021-10-03 15:30:45.506] Stratum from pool 0 detected new block at height 1376
1573

]

Have you created a ".sh" file to run it with your specific frequency in the command line?

If you run the standard one it will default to stock freq.


I dont think so  i just start cgminer with this command 

cd ~/git/vthoang/cgminer/./cgminer -o stratum+tcp://sha256.mining-dutch.nl:9996 -u / -p  / --suggest-diff 10 --gekko-2pac-freq 200

How do i do that

What OS are you running on?

Im running cgminer on a rspbery p1 4 with rasbian  en a powerd usb hub with just one  2pac miner in it with active cooler everything works only the problem is  when i start up cgminer he start on 100mhz en stays on 100mhz 

Page one, post one, FAQ section. Try this and see what happens.

im using a rasberry pi with a powerd hub (i have try also on the raspberry without hub)

pi@raspberrypi:~/mining/newpac/cgminer $ ./cgminer -n
 [2021-01-17 17:35:14.105] USB all: found 4 devices - listing known devices
.USB dev 0: Bus 1 Device 13 ID: 0403:6015
  ** dev 0: Failed to open, err -3                   
 [2021-01-17 17:35:14.105] 1 known USB devices                   
pi@raspberrypi:~/mining/newpac/cgminer $ 



and this is when i start  cgminer

cgminer version 4.11.1 - Started: [2021-01-17 17:47:35.578]
--------------------------------------------------------------------------------
 (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
 A:65536  R:0  HW:0  WU:0.0/m
 Connected to sha256.mining-dutch.nl diff 2.05K with stratum as user Davy4260.wo
 Block: 65ce0fe5...  Diff:112G  Started: [17:47:35.002]  Best share: 0
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
 [2021-01-17 17:47:40.796] See README file included for help
 [2021-01-17 17:47:40.796] GekkoScience detect (1:13) failed to initialise (inco
rrect device?), resetting
 [2021-01-17 17:47:41.282] Pool 0 difficulty changed to 2048
 [2021-01-17 17:47:46.123] USB init, open device failed, err -3, you don't have
privilege to access - GSH device 1:13
 [2021-01-17 17:47:46.123] See README file included for help
 [2021-01-17 17:47:46.124] GekkoScience detect (1:13) failed to initialise (inco
rrect device?), resetting
 [2021-01-17 17:47:51.457] USB init, open device failed, err -3, you don't have
privilege to access - GSH device 1:13
 [2021-01-17 17:47:51.457] See README file included for help
 [2021-01-17 17:47:51.457] GekkoScience detect (1:13) failed to initialise (inco
rrect device?), resetting

Need details. What OS? What port? Powered usb hub or not? Whats your .bat file say?