Search content
Sort by
Showing 6 of 6 results by just4u
Re: SRBMiner Cryptonight AMD GPU Miner V1.9.2 - native algo switching
I never really thought about flashing these cards (had them over a year now..) reports were it was "iffy" on Asus Strix cards that don't use Samsung mem. I tend to switch between Xmrig, Stak, SRB, if mining xmr.. plus dok has low fees and works on his a lot.
Hi, with SRB your best drivers would be 18.6.1 with CN/R, because on every new block from the pool, the kernel is recompiled and my tests show that 18.6.1 compiles the best code still.
I know there are users here who have Hynix mem Vegas and were able to get nice results, maybe they can help you out. I have only 1 Vega56 with Hynix mem but it is a really good piece, it goes on profile 10 without problems and 2100+ hash.
112/16/2 are the best settings you can get for CN/R. Maybe try out the low profiles (add L after the profile number)
If using config file, you must surround the value with quotation marks if you want to use the L profile. Example : "5L"
Thanks for the kind words, and for using SRB.
Yeah, I used to use the 18.6.1s but so hard now with the way you can configure wattman for so many different usage scenarios. I'll look into the Lowprofile stuff. Thanks Dok.
Re: SRBMiner Cryptonight AMD GPU Miner V1.9.2 - native algo switching
It's been awhile since I've used SRB Miner. Mining XMR using 2x Strix Vega 56s with Hynix Memory (and latest drivers as I don't only mine with the system) Can't really go above tweak profile 2 without artifices, same goes if I raise mem clocks to high (930+) Is there anything else I can try based on the information I am giving here? I think it's fairly ok.. not sure what else I can do. Thanks for any advice.
GPU0 : 1780 H/s [T: 55c, RPM: 1998, CC: 1307 MHz, MC: 900 MHz][BUS:29]
GPU1 : 1796 H/s [T: 65c, RPM: 2446, CC: 1307 MHz, MC: 900 MHz][BUS:32]
Watts around 160 per card (GPUZ)
GPU0 : 1780 H/s [T: 55c, RPM: 1998, CC: 1307 MHz, MC: 900 MHz][BUS:29]
GPU1 : 1796 H/s [T: 65c, RPM: 2446, CC: 1307 MHz, MC: 900 MHz][BUS:32]
Watts around 160 per card (GPUZ)
I recommend you to flash Vega 64 bios on your Vega 56s, so you will be able to get at least 1900 h/s per card in normal condition.
TRM and you have 2100 with hynix or 2350Hr with samsung vega 56
I never really thought about flashing these cards (had them over a year now..) reports were it was "iffy" on Asus Strix cards that don't use Samsung mem. I tend to switch between Xmrig, Stak, SRB, if mining xmr.. plus dok has low fees and works on his a lot.
Re: SRBMiner Cryptonight AMD GPU Miner V1.9.2 - native algo switching
It's been awhile since I've used SRB Miner. Mining XMR using 2x Strix Vega 56s with Hynix Memory (and latest drivers as I don't only mine with the system) Can't really go above tweak profile 2 without artifices, same goes if I raise mem clocks to high (930+) Is there anything else I can try based on the information I am giving here? I think it's fairly ok.. not sure what else I can do. Thanks for any advice.
GPU0 : 1780 H/s [T: 55c, RPM: 1998, CC: 1307 MHz, MC: 900 MHz][BUS:29]
GPU1 : 1796 H/s [T: 65c, RPM: 2446, CC: 1307 MHz, MC: 900 MHz][BUS:32]
Watts around 160 per card (GPUZ)
Batfile:
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
cls
SRBMiner-CN.exe --config Config\config-xmr.txt --pools Pools\pools-xmr.txt
Config file is fairly standard,
{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"double_threads" : true,
"persistent_memory" : false,
"gpu_conf" :
[
{
"id" : 0,
"intensity" : 112,
"worksize" : 16,
"threads" : 2,
"tweak_profile" : 2
},
{
"id" : 1,
"intensity" : 112,
"worksize" : 16,
"threads" : 2,
"tweak_profile" : 2
}
]
}
GPU0 : 1780 H/s [T: 55c, RPM: 1998, CC: 1307 MHz, MC: 900 MHz][BUS:29]
GPU1 : 1796 H/s [T: 65c, RPM: 2446, CC: 1307 MHz, MC: 900 MHz][BUS:32]
Watts around 160 per card (GPUZ)
Batfile:
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
cls
SRBMiner-CN.exe --config Config\config-xmr.txt --pools Pools\pools-xmr.txt
Config file is fairly standard,
{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"double_threads" : true,
"persistent_memory" : false,
"gpu_conf" :
[
{
"id" : 0,
"intensity" : 112,
"worksize" : 16,
"threads" : 2,
"tweak_profile" : 2
},
{
"id" : 1,
"intensity" : 112,
"worksize" : 16,
"threads" : 2,
"tweak_profile" : 2
}
]
}
Re: SRBMiner Cryptonight AMD GPU Miner V1.7.6 - native algo switching
My best results are still with the 1.7.2s but the autoconfigure is fairly slick overall I think. Using Vega56s with the latest 1901 drivers (dang their nice.. wattman got a upgrade and they've fixed fan issues disabling) im really liking them.
Re: SRBMiner Cryptonight AMD GPU Miner V1.7.1 - native algo switching
RX VEGA 64 with SRB-Miner V1.7.1
SETUP: 12x Vega 64 Ref/Liquide mix on ASUS B250 Mining Expert
Algo: XMR (Monero)/GRAFT (Graft Coin) on V8
[2018-11-29 23:30:33] GPU0 : 2054 H/s [T: 33c, RPM: 2472, CC: 1408 MHz, MC: 1100 MHz][BUS:28]
[2018-11-29 23:30:33] GPU1 : 2056 H/s [T: 34c, RPM: 2351, CC: 1408 MHz, MC: 1100 MHz][BUS:19]
[2018-11-29 23:30:33] GPU2 : 2059 H/s [T: 35c, RPM: 2369, CC: 1408 MHz, MC: 1100 MHz][BUS:37]
[2018-11-29 23:30:33] GPU3 : 2050 H/s [T: 45c, RPM: 4196, CC: 1408 MHz, MC: 1100 MHz][BUS:34]
[2018-11-29 23:30:33] GPU4 : 2052 H/s [T: 45c, RPM: 4033, CC: 1408 MHz, MC: 1100 MHz][BUS:9]
[2018-11-29 23:30:33] GPU5 : 2057 H/s [T: 33c, RPM: 2417, CC: 1408 MHz, MC: 1100 MHz][BUS:13]
[2018-11-29 23:30:33] GPU6 : 2050 H/s [T: 42c, RPM: 3787, CC: 1408 MHz, MC: 1100 MHz][BUS:31]
[2018-11-29 23:30:33] GPU7 : 2057 H/s [T: 35c, RPM: 2437, CC: 1408 MHz, MC: 1100 MHz][BUS:16]
[2018-11-29 23:30:33] GPU8 : 2049 H/s [T: 44c, RPM: 3999, CC: 1408 MHz, MC: 1100 MHz][BUS:25]
[2018-11-29 23:30:33] GPU9 : 2059 H/s [T: 37c, RPM: 2317, CC: 1408 MHz, MC: 1100 MHz][BUS:40]
[2018-11-29 23:30:33] GPU10: 2052 H/s [T: 35c, RPM: 2413, CC: 1408 MHz, MC: 1100 MHz][BUS:22]
[2018-11-29 23:30:33] GPU11: 2056 H/s [T: 34c, RPM: 2338, CC: 1408 MHz, MC: 1100 MHz][BUS:5]
[2018-11-30 00:29:55] Total: 20732 H/s
more on: https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850
greetings
Patrick
SETUP: 12x Vega 64 Ref/Liquide mix on ASUS B250 Mining Expert
Algo: XMR (Monero)/GRAFT (Graft Coin) on V8
[2018-11-29 23:30:33] GPU0 : 2054 H/s [T: 33c, RPM: 2472, CC: 1408 MHz, MC: 1100 MHz][BUS:28]
[2018-11-29 23:30:33] GPU1 : 2056 H/s [T: 34c, RPM: 2351, CC: 1408 MHz, MC: 1100 MHz][BUS:19]
[2018-11-29 23:30:33] GPU2 : 2059 H/s [T: 35c, RPM: 2369, CC: 1408 MHz, MC: 1100 MHz][BUS:37]
[2018-11-29 23:30:33] GPU3 : 2050 H/s [T: 45c, RPM: 4196, CC: 1408 MHz, MC: 1100 MHz][BUS:34]
[2018-11-29 23:30:33] GPU4 : 2052 H/s [T: 45c, RPM: 4033, CC: 1408 MHz, MC: 1100 MHz][BUS:9]
[2018-11-29 23:30:33] GPU5 : 2057 H/s [T: 33c, RPM: 2417, CC: 1408 MHz, MC: 1100 MHz][BUS:13]
[2018-11-29 23:30:33] GPU6 : 2050 H/s [T: 42c, RPM: 3787, CC: 1408 MHz, MC: 1100 MHz][BUS:31]
[2018-11-29 23:30:33] GPU7 : 2057 H/s [T: 35c, RPM: 2437, CC: 1408 MHz, MC: 1100 MHz][BUS:16]
[2018-11-29 23:30:33] GPU8 : 2049 H/s [T: 44c, RPM: 3999, CC: 1408 MHz, MC: 1100 MHz][BUS:25]
[2018-11-29 23:30:33] GPU9 : 2059 H/s [T: 37c, RPM: 2317, CC: 1408 MHz, MC: 1100 MHz][BUS:40]
[2018-11-29 23:30:33] GPU10: 2052 H/s [T: 35c, RPM: 2413, CC: 1408 MHz, MC: 1100 MHz][BUS:22]
[2018-11-29 23:30:33] GPU11: 2056 H/s [T: 34c, RPM: 2338, CC: 1408 MHz, MC: 1100 MHz][BUS:5]
[2018-11-30 00:29:55] Total: 20732 H/s
more on: https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit#gid=514064850
greetings
Patrick
Patrick, how are you getting your temperatures so low? I get the water cooled ones but you have a mix there, yeah? I can usually keep my Vega Cards in the high 50s low 60s using Overdrive settings /w Core at 880MV Mem 900MV but that's about it so I am curious what others are doing to get those temps down.
Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
Hi, I have some questions some of you may be able to answer for me.. (using Strix Vega56s non flashed latest drivers) /w SRB miner.
I was reading thru setting everything up that's all good. Works well but decided to also try out OverdriveNTool (latest version) based on some of the posts I've seen..
Questions:
My first 5 Power states appear to reset I apply them P6/7 get applied. Is this normal? If not how do I correct that? (I've tried refresh/reload)
Also wondering if these settings take after a restart of the computer, They don't appear to.. at least not fully.
So far my workaround has been to start the computer.. Run Overdrive tool Loading a saved setting. Then use afterburner to manually set some things. Getting 1740H Per card (have 2 cards mining xmr) /w temps 52/55C Powerdraw 470W roughly total system (ryzen cpu mining to) So apparently it's sort of working... but i do have to rerun Overdrive everytime I reboot.. and I do have to use afterburner to adjust.
(Note before using overdrivetool I'd simply undervolt with afterburner by -131 set pl to 70% Core to 1400 mem to 880 but temps would be 60/69c for the cards and about 150w more system power)
I was reading thru setting everything up that's all good. Works well but decided to also try out OverdriveNTool (latest version) based on some of the posts I've seen..
Questions:
My first 5 Power states appear to reset I apply them P6/7 get applied. Is this normal? If not how do I correct that? (I've tried refresh/reload)
Also wondering if these settings take after a restart of the computer, They don't appear to.. at least not fully.
So far my workaround has been to start the computer.. Run Overdrive tool Loading a saved setting. Then use afterburner to manually set some things. Getting 1740H Per card (have 2 cards mining xmr) /w temps 52/55C Powerdraw 470W roughly total system (ryzen cpu mining to) So apparently it's sort of working... but i do have to rerun Overdrive everytime I reboot.. and I do have to use afterburner to adjust.
(Note before using overdrivetool I'd simply undervolt with afterburner by -131 set pl to 70% Core to 1400 mem to 880 but temps would be 60/69c for the cards and about 150w more system power)